From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Mon, 22 Aug 2016 15:36:14 +0200 Subject: [PATCH v2 0/4] Add AXP209 GPIO driver In-Reply-To: <20160720141139.25098-1-maxime.ripard@free-electrons.com> References: <20160720141139.25098-1-maxime.ripard@free-electrons.com> Message-ID: <20160822133614.GN7104@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Jul 20, 2016 at 04:11:35PM +0200, Maxime Ripard wrote: > Hi, > > The axp209 PMIC used in combination to some Allwinner SoCs has a bunch > of GPIOs accessible. Some boards use these to control their backlight > or a few LEDs. > > There's supposed to be 4 of them, but the fourth one has a different > configuration register scheme, and I couldn't find any board that was > using this GPIO. It will be probably be supported eventually, but > until then, we support only the first 3 GPIOs. I merged the patches 3 and 4. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: