[PATCH] arm: add an option for erratum 657417

[npiggin@gmail.com (Nicholas Piggin)]

On Wed, 24 Aug 2016 20:56:46 +1000
Nicholas Piggin <npiggin@gmail.com> wrote:

> On Wed, 24 Aug 2016 19:05:30 +1000
> Nicholas Piggin <npiggin@gmail.com> wrote:
> 
> > On Wed, 24 Aug 2016 09:41:39 +0200
> > Arnd Bergmann <arnd@arndb.de> wrote:
> >   
> > > On Wednesday, August 24, 2016 2:00:44 PM CEST Nicholas Piggin wrote:    
> > > > On Tue, 23 Aug 2016 14:01:29 +0200
> > > > Arnd Bergmann <arnd@arndb.de> wrote:
> > > >       
> > > > > On Friday, August 12, 2016 6:19:17 PM CEST Nicholas Piggin wrote:      
> > > > > > Erratum 657417 is worked around by the linker by inserting additional
> > > > > > branch trampolines to avoid problematic branch target locations. This
> > > > > > results in much higher linking time and presumably slower and larger
> > > > > > generated code. The workaround also seems to only be required when
> > > > > > linking thumb2 code, but the linker applies it for non-thumb2 code as
> > > > > > well.
> > > > > > 
> > > > > > The workaround today is left to the linker to apply, which is overly
> > > > > > conservative.
> > > > > > 
> > > > > > https://sourceware.org/ml/binutils/2009-05/msg00297.html
> > > > > > 
> > > > > > This patch adds an option which defaults to "y" in cases where we
> > > > > > could possibly be running Cortex A8 and using Thumb2 instructions.
> > > > > > In reality the workaround might not be required at all for the kernel
> > > > > > if virtual instruction memory is linear in physical memory. However it
> > > > > > is more conservative to keep the workaround, and it may be the case
> > > > > > that the TLB lookup would be required in order to catch branches to
> > > > > > unmapped or no-execute pages.
> > > > > > 
> > > > > > In an allyesconfig build, this workaround causes a large load on
> > > > > > the linker's branch stub hash and slows down the final link by a
> > > > > > factor of 5.
> > > > > > 
> > > > > > Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> > > > > >         
> > > > > 
> > > > > Thanks a lot for finding this issue. I can confirm that your patch
> > > > > helps noticeably in all configurations, reducing time for a relink
> > > > > from 18 minutes to 9 minutes on my machine in the best case, but
> > > > > the factor 10 slowdown of the final link with your thin archives
> > > > > and gc-sections patches remains.
> > > > > 
> > > > > I suspect there is still something else going on besides the 657417
> > > > > slowing things down, but it's also possible that I'm doing something
> > > > > wrong here.      
> > > > 
> > > > Okay, I was only testing thin archives. gc-sections I didn't look at.
> > > > With thin archives, one final arm allyesconfig link with this patch is
> > > > not showing a regression. gc-sections must be causing something else
> > > > ARM specific, because powerpc seems to link fast with gc-sections.      
> > > 
> > > Ok, I see. For completeness, here are my results with thin archives and
> > > without gc-sections on ARM:    
> > 
> > This is about what I saw.
> >   
> > > 
> > > || no THUMB2, thin archives, no gc-sections, before: 144 seconds
> > > 
> > > 09:29:51   LINK    vmlinux
> > > 09:29:51  AR      built-in.o
> > > 09:29:52  LD      vmlinux.o
> > > 09:30:12   MODPOST vmlinux.o
> > > 09:30:14  GEN     .version
> > > 09:30:14   CHK     include/generated/compile.h
> > >   UPD     include/generated/compile.h
> > > 09:30:14   CC      init/version.o
> > > 09:30:15   AR      init/built-in.o
> > > 09:30:43  KSYM    .tmp_kallsyms1.o
> > > 09:31:28  KSYM    .tmp_kallsyms2.o
> > > 09:31:40  LD      vmlinux
> > > 09:32:13  SORTEX  vmlinux
> > > 09:32:13  SYSMAP  System.map
> > > 09:32:15   OBJCOPY arch/arm/boot/Image
> > > 
> > > || no THUMB2, thin archives, no gc-sections, after: 70 seconds
> > > 
> > > 09:33:54   LINK    vmlinux
> > > 09:33:54  AR      built-in.o
> > > 09:33:55  LD      vmlinux.o
> > > 09:34:13   MODPOST vmlinux.o
> > > 09:34:15  GEN     .version
> > > 09:34:16   CHK     include/generated/compile.h
> > >   UPD     include/generated/compile.h
> > > 09:34:16   CC      init/version.o
> > > 09:34:16   AR      init/built-in.o
> > > 09:34:24  KSYM    .tmp_kallsyms1.o
> > > 09:34:43  KSYM    .tmp_kallsyms2.o
> > > 09:34:55  LD      vmlinux
> > > 09:35:03  SORTEX  vmlinux
> > > 09:35:03  SYSMAP  System.map
> > > 09:35:04   OBJCOPY arch/arm/boot/Image
> > > 
> > > The final 'LD' step is much faster here as you also found, and now
> > > the time for the complete link is mainly the initial 'LD vmlinux.o'
> > > step, which did not get faster with your patch.    
> > 
> > The info here isn't very good because KSYM is printed after the link
> > but before the kallsyms generation. We can kind of see what's happening
> > if we take the time between the KSYM and the LD vmlinux as the time for
> > kallsyms: 
> >                            before    after
> > KSYM                      ~12s      ~12s
> > LD      vmlinux.o          20s       18s
> > LD      .tmp_kallsyms1.o   28s        8s
> > LD      .tmp_kallsyms2.o   33s        7s
> > LD      vmlinux            33s        8s
> > 
> > Probably the cortex a8 workaround does not get applied to vmlinux.o
> > link (due to being incremental), so we don't see any speedup with the
> > patch. It takes longer overall I guess because it keeps a lot of
> > symbols in the output file (due to incremental).
> > 
> >   
> > > > Can you send your latest ARM patch to enable this and I'll have a look
> > > > at it?      
> > > 
> > > See below. I have not updated the patch description yet, but included
> > > the changes that Nico suggested. The test above used the same patch
> > > but left out the 'select LD_DEAD_CODE_DATA_ELIMINATION' line.    
> > 
> > Thanks, I'll take a look.  
> 
> Okay, I can't reproduce your bad linking times even with gc-sections. It's
> possible I'm doing something wrong, but with my patches + your patch and
> standard arm allyesconfig:
> 
>   20:33:56  AR      built-in.o
>   20:33:57  LD      vmlinux.o
>   MODPOST vmlinux.o
>   20:34:12  GEN     .version
>   CHK     include/generated/compile.h
>   UPD     include/generated/compile.h
>   CC      init/version.o
>   AR      init/built-in.o
>   20:34:24  KSYM    .tmp_kallsyms1.o
>   20:34:45  KSYM    .tmp_kallsyms2.o
>   20:34:54  LD      vmlinux
>   20:35:07  SORTEX  vmlinux
>   20:35:07  SYSMAP  System.map
> 
> I have about 71 seconds for the final link phase.
> 
> Command is:
> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- -j3 vmlinux
> 
> $ arm-linux-gnueabi-ld -v
> GNU ld (GNU Binutils for Debian) 2.27
> 
> Confirming function/data sections:
> $ objdump -h built-in.o | grep ^[[:space:]]*[0-9][0-9]* | wc -l
> 1012848
> 
> $ size vmlinux
>    text	   data	    bss	    dec	    hex	filename
> 74205771	36746855	19072744	130025370	7c0079a	vmlinux
> 
> $ file vmlinux
> vmlinux: ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), statically linked, BuildID[sha1]=37d207288f81f83291dfb45294a94c555d9fbdb8, not stripped
> 
> Final link command is:
> arm-linux-gnueabi-ld -EL --no-fix-cortex-a8 -p --no-undefined -X --pic-veneer --build-id --gc-sections -X -o vmlinux -T ./arch/arm/kernel/vmlinux.lds --whole-archive built-in.o .tmp_kallsyms2.o
> 
> Which takes 12s
> 
> I'm building THUMB2 now, but if you have any hints for me...

Just did a thumb2 build. Disable V6, enable thumb2, otherwise same config
and tree takes a long time to link as expected because the
--no-fix-cortex-a8 option is not being applied. Adding that brings link
time down to same as allyesconfig (slightly faster).

Confirmed it's output thumb2 instructions.

Thanks,
Nick