* [PATCH] arm64: Set UTS_MACHINE in the Makefile
@ 2016-08-30 8:31 Michal Marek
2016-08-30 9:53 ` Will Deacon
0 siblings, 1 reply; 6+ messages in thread
From: Michal Marek @ 2016-08-30 8:31 UTC (permalink / raw)
To: linux-arm-kernel
The make rpm target depends on proper UTS_MACHINE definition. Also, use
the variable in arch/arm64/kernel/setup.c, so that it's not accidentally
removed in the future.
Reported-and-tested-by: Fabian Vogt <fvogt@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
---
arch/arm64/Makefile | 2 ++
arch/arm64/kernel/Makefile | 2 ++
arch/arm64/kernel/setup.c | 2 +-
3 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 5b54f8c021d8..ab3df36fdfbb 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -38,10 +38,12 @@ ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
KBUILD_CPPFLAGS += -mbig-endian
AS += -EB
LD += -EB
+UTS_MACHINE := aarch64_be
else
KBUILD_CPPFLAGS += -mlittle-endian
AS += -EL
LD += -EL
+UTS_MACHINE := aarch64
endif
CHECKFLAGS += -D__aarch64__
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 14f7b651c787..7d66bbaafc0c 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -10,6 +10,8 @@ CFLAGS_REMOVE_ftrace.o = -pg
CFLAGS_REMOVE_insn.o = -pg
CFLAGS_REMOVE_return_address.o = -pg
+CFLAGS_setup.o = -DUTS_MACHINE='"$(UTS_MACHINE)"'
+
# Object file lists.
arm64-obj-y := debug-monitors.o entry.o irq.o fpsimd.o \
entry-fpsimd.o process.o ptrace.o setup.o signal.o \
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 536dce22fe76..c5dd09778c75 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -228,7 +228,7 @@ void __init setup_arch(char **cmdline_p)
{
pr_info("Boot CPU: AArch64 Processor [%08x]\n", read_cpuid_id());
- sprintf(init_utsname()->machine, ELF_PLATFORM);
+ sprintf(init_utsname()->machine, UTS_MACHINE);
init_mm.start_code = (unsigned long) _text;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
--
2.6.6
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH] arm64: Set UTS_MACHINE in the Makefile
2016-08-30 8:31 [PATCH] arm64: Set UTS_MACHINE in the Makefile Michal Marek
@ 2016-08-30 9:53 ` Will Deacon
2016-08-30 10:50 ` Michal Marek
0 siblings, 1 reply; 6+ messages in thread
From: Will Deacon @ 2016-08-30 9:53 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Aug 30, 2016 at 10:31:35AM +0200, Michal Marek wrote:
> The make rpm target depends on proper UTS_MACHINE definition. Also, use
> the variable in arch/arm64/kernel/setup.c, so that it's not accidentally
> removed in the future.
>
> Reported-and-tested-by: Fabian Vogt <fvogt@suse.com>
> Signed-off-by: Michal Marek <mmarek@suse.com>
> ---
What exactly do you mean by "proper", here? Is it just the endianness
suffix that you need?
> arch/arm64/Makefile | 2 ++
> arch/arm64/kernel/Makefile | 2 ++
> arch/arm64/kernel/setup.c | 2 +-
> 3 files changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
> index 5b54f8c021d8..ab3df36fdfbb 100644
> --- a/arch/arm64/Makefile
> +++ b/arch/arm64/Makefile
> @@ -38,10 +38,12 @@ ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
> KBUILD_CPPFLAGS += -mbig-endian
> AS += -EB
> LD += -EB
> +UTS_MACHINE := aarch64_be
> else
> KBUILD_CPPFLAGS += -mlittle-endian
> AS += -EL
> LD += -EL
> +UTS_MACHINE := aarch64
> endif
I think we're be better off changing scripts/package/Makefile to map
UTS_MACHINE into whatever rpm requires, just like scripts/package/builddeb
already does this for .deb (which I think ends up broken with your patch
applied).
Will
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] arm64: Set UTS_MACHINE in the Makefile
2016-08-30 9:53 ` Will Deacon
@ 2016-08-30 10:50 ` Michal Marek
2016-08-30 11:20 ` Will Deacon
0 siblings, 1 reply; 6+ messages in thread
From: Michal Marek @ 2016-08-30 10:50 UTC (permalink / raw)
To: linux-arm-kernel
On 2016-08-30 11:53, Will Deacon wrote:
> On Tue, Aug 30, 2016 at 10:31:35AM +0200, Michal Marek wrote:
>> The make rpm target depends on proper UTS_MACHINE definition. Also, use
>> the variable in arch/arm64/kernel/setup.c, so that it's not accidentally
>> removed in the future.
>>
>> Reported-and-tested-by: Fabian Vogt <fvogt@suse.com>
>> Signed-off-by: Michal Marek <mmarek@suse.com>
>> ---
>
> What exactly do you mean by "proper", here? Is it just the endianness
> suffix that you need?
The default for UTS_MACHINE is the kbuild arch name, which would be arm64.
Michal
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] arm64: Set UTS_MACHINE in the Makefile
2016-08-30 10:50 ` Michal Marek
@ 2016-08-30 11:20 ` Will Deacon
2016-08-30 11:53 ` Michal Marek
0 siblings, 1 reply; 6+ messages in thread
From: Will Deacon @ 2016-08-30 11:20 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Aug 30, 2016 at 12:50:41PM +0200, Michal Marek wrote:
> On 2016-08-30 11:53, Will Deacon wrote:
> > On Tue, Aug 30, 2016 at 10:31:35AM +0200, Michal Marek wrote:
> >> The make rpm target depends on proper UTS_MACHINE definition. Also, use
> >> the variable in arch/arm64/kernel/setup.c, so that it's not accidentally
> >> removed in the future.
> >>
> >> Reported-and-tested-by: Fabian Vogt <fvogt@suse.com>
> >> Signed-off-by: Michal Marek <mmarek@suse.com>
> >> ---
> >
> > What exactly do you mean by "proper", here? Is it just the endianness
> > suffix that you need?
>
> The default for UTS_MACHINE is the kbuild arch name, which would be arm64.
Ok, but why doesn't that work for rpm?
Did you see the other part of my reply?
Will
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] arm64: Set UTS_MACHINE in the Makefile
2016-08-30 11:20 ` Will Deacon
@ 2016-08-30 11:53 ` Michal Marek
2016-08-30 14:28 ` [PATCH v2] " Michal Marek
0 siblings, 1 reply; 6+ messages in thread
From: Michal Marek @ 2016-08-30 11:53 UTC (permalink / raw)
To: linux-arm-kernel
On 2016-08-30 13:20, Will Deacon wrote:
> On Tue, Aug 30, 2016 at 12:50:41PM +0200, Michal Marek wrote:
>> On 2016-08-30 11:53, Will Deacon wrote:
>>> On Tue, Aug 30, 2016 at 10:31:35AM +0200, Michal Marek wrote:
>>>> The make rpm target depends on proper UTS_MACHINE definition. Also, use
>>>> the variable in arch/arm64/kernel/setup.c, so that it's not accidentally
>>>> removed in the future.
>>>>
>>>> Reported-and-tested-by: Fabian Vogt <fvogt@suse.com>
>>>> Signed-off-by: Michal Marek <mmarek@suse.com>
>>>> ---
>>>
>>> What exactly do you mean by "proper", here? Is it just the endianness
>>> suffix that you need?
>>
>> The default for UTS_MACHINE is the kbuild arch name, which would be arm64.
>
> Ok, but why doesn't that work for rpm?
It does not work for rpm, because the arch/* subdirectory names are
unknown to userspace. rpmbuild --target ... expects the uname -m string
of the target architecture. What other architectures do is that they
change the UTS_MACHINE definition if it differs from the kbuild
architecture name (e.g. x86, power, s390).
> Did you see the other part of my reply?
Oops, I haven't.
On 2016-08-30 11:53, Will Deacon wrote:
> I think we're be better off changing scripts/package/Makefile to map
> UTS_MACHINE into whatever rpm requires, just like scripts/package/builddeb
> already does this for .deb (which I think ends up broken with your patch
> applied).
As explained above, rpm requires the UTS_MACHINE definition that other
architectures set in their Makefiles. Debian architectures use a
slightly different naming than the uname -m string, so a mapping is
needed. You are right about the breakage, I will send a v2.
Michal
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2] arm64: Set UTS_MACHINE in the Makefile
2016-08-30 11:53 ` Michal Marek
@ 2016-08-30 14:28 ` Michal Marek
0 siblings, 0 replies; 6+ messages in thread
From: Michal Marek @ 2016-08-30 14:28 UTC (permalink / raw)
To: linux-arm-kernel
UTS_MACHINE is set to the kbuild architecture name by the main Makefile,
and optionally adjusted by the arch Makefiles, so that it holds the
architecture name as presented to userspace (uname -m). In particular,
the make rpm target relies on proper UTS_MACHINE definition. Do the same
in the arm64 Makefile and also, use the variable in
arch/arm64/kernel/setup.c, so that it's not accidentally removed in the
future. Meanwhile, the make deb-pkg target adapted to the wrong
UTS_MACHINE definition, fix that as well.
Reported-and-tested-by: Fabian Vogt <fvogt@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
---
v2: Explain the problem more in the changelog and also fix make deb-pkg
(thanks to Will Deacon)
arch/arm64/Makefile | 2 ++
arch/arm64/kernel/Makefile | 2 ++
arch/arm64/kernel/setup.c | 2 +-
scripts/package/builddeb | 2 +-
4 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 5b54f8c021d8..ab3df36fdfbb 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -38,10 +38,12 @@ ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
KBUILD_CPPFLAGS += -mbig-endian
AS += -EB
LD += -EB
+UTS_MACHINE := aarch64_be
else
KBUILD_CPPFLAGS += -mlittle-endian
AS += -EL
LD += -EL
+UTS_MACHINE := aarch64
endif
CHECKFLAGS += -D__aarch64__
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 14f7b651c787..7d66bbaafc0c 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -10,6 +10,8 @@ CFLAGS_REMOVE_ftrace.o = -pg
CFLAGS_REMOVE_insn.o = -pg
CFLAGS_REMOVE_return_address.o = -pg
+CFLAGS_setup.o = -DUTS_MACHINE='"$(UTS_MACHINE)"'
+
# Object file lists.
arm64-obj-y := debug-monitors.o entry.o irq.o fpsimd.o \
entry-fpsimd.o process.o ptrace.o setup.o signal.o \
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 536dce22fe76..c5dd09778c75 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -228,7 +228,7 @@ void __init setup_arch(char **cmdline_p)
{
pr_info("Boot CPU: AArch64 Processor [%08x]\n", read_cpuid_id());
- sprintf(init_utsname()->machine, ELF_PLATFORM);
+ sprintf(init_utsname()->machine, UTS_MACHINE);
init_mm.start_code = (unsigned long) _text;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index e1c09e2f9be7..b8900db5115a 100755
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -51,7 +51,7 @@ set_debarch() {
debarch=hppa ;;
mips*)
debarch=mips$(grep -q CPU_LITTLE_ENDIAN=y $KCONFIG_CONFIG && echo el || true) ;;
- arm64)
+ aarch64*)
debarch=arm64 ;;
arm*)
if grep -q CONFIG_AEABI=y $KCONFIG_CONFIG; then
--
2.6.6
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-08-30 14:28 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-08-30 8:31 [PATCH] arm64: Set UTS_MACHINE in the Makefile Michal Marek
2016-08-30 9:53 ` Will Deacon
2016-08-30 10:50 ` Michal Marek
2016-08-30 11:20 ` Will Deacon
2016-08-30 11:53 ` Michal Marek
2016-08-30 14:28 ` [PATCH v2] " Michal Marek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).