From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Wed, 31 Aug 2016 18:22:40 +0200 Subject: [PATCH v3] ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board In-Reply-To: <20160829141832.10566-1-icenowy@aosc.xyz> References: <20160829141832.10566-1-icenowy@aosc.xyz> Message-ID: <20160831162240.GJ14379@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Aug 29, 2016 at 10:18:32PM +0800, Icenowy Zheng wrote: > UART1 is connected to the bluetooth part of RTL8723BS WiFi/BT combo card > on iNet D978 Rev2 board. > > Enable the UART1 to make it possible to use the modified hciattach by > Realtek to drive the BT part of RTL8723BS. > > On the board no r_uart pins are found now (the onboard RX/TX pins are > wired to PF2/PF4, which is muxed with mmc0), so also disabled it. > > Signed-off-by: Icenowy Zheng I'll make the same comments than in the v2. https://www.spinics.net/lists/arm-kernel/msg527001.html Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: