From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Fri, 2 Sep 2016 09:43:14 +0200 Subject: [linux-sunxi] Re: [PATCH v3] ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board In-Reply-To: References: <20160829141832.10566-1-icenowy@aosc.xyz> <20160831162240.GJ14379@lukather> Message-ID: <20160902074314.GC6313@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Sep 01, 2016 at 10:40:32AM +0200, Hans de Goede wrote: > Hi, > > On 31-08-16 18:22, Maxime Ripard wrote: > >On Mon, Aug 29, 2016 at 10:18:32PM +0800, Icenowy Zheng wrote: > >>UART1 is connected to the bluetooth part of RTL8723BS WiFi/BT combo card > >>on iNet D978 Rev2 board. > >> > >>Enable the UART1 to make it possible to use the modified hciattach by > >>Realtek to drive the BT part of RTL8723BS. > >> > >>On the board no r_uart pins are found now (the onboard RX/TX pins are > >>wired to PF2/PF4, which is muxed with mmc0), so also disabled it. > >> > >>Signed-off-by: Icenowy Zheng > > > >I'll make the same comments than in the v2. > >https://www.spinics.net/lists/arm-kernel/msg527001.html > > I've a feeling there is a bit of miscommunication here, > let me try to clarify things: > > Icenowy, Maxime wants you to split this into 2 patches: Hmm, yes, sorry if it was unclear. Thanks Hans Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: