From: dannym@scratchpost.org (Danny Milosavljevic)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ASoC: sun4i-codec: Distinguish sun4i from sun7i
Date: Mon, 5 Sep 2016 21:24:04 +0200 [thread overview]
Message-ID: <20160905192404.13871-2-dannym@scratchpost.org> (raw)
In-Reply-To: <20160905192404.13871-1-dannym@scratchpost.org>
ASoC: sun4i-codec: Distinguish sun4i from sun7i
Introduce mechanism to detect sun7i and provide a different regmap, codec
and different controls for it - different compared to sun4i Allwinner A10.
The controls will be extended in a forthcoming patch - it is necessary to
distinguish between sun4i and sun7i controls because the mic gains are in
different registers.
Renamed SUN4I_CODEC_AC_SYS_VERI to SUN7I_CODEC_AC_DAC_CAL and renamed
SUN4I_CODEC_AC_MIC_PHONE_CAL to SUN7I_CODEC_AC_MIC_PHONE_CAL because these
are actually not present on Allwinner A10.
Handle quirks by regmap config and codec and select the correct quirks
automatically.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
---
sound/soc/sunxi/sun4i-codec.c | 66 +++++++++++++++++++++++++++++++++++--------
1 file changed, 54 insertions(+), 12 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index 0e19c50..8531c93 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -96,8 +96,8 @@
/* Other various ADC registers */
#define SUN4I_CODEC_DAC_TXCNT (0x30)
#define SUN4I_CODEC_ADC_RXCNT (0x34)
-#define SUN4I_CODEC_AC_SYS_VERI (0x38)
-#define SUN4I_CODEC_AC_MIC_PHONE_CAL (0x3c)
+#define SUN7I_CODEC_AC_DAC_CAL (0x38)
+#define SUN7I_CODEC_AC_MIC_PHONE_CAL (0x3c)
struct sun4i_codec {
struct device *dev;
@@ -509,10 +509,17 @@ static const struct snd_kcontrol_new sun4i_codec_pa_mute =
static DECLARE_TLV_DB_SCALE(sun4i_codec_pa_volume_scale, -6300, 100, 1);
-static const struct snd_kcontrol_new sun4i_codec_widgets[] = {
- SOC_SINGLE_TLV("Power Amplifier Volume", SUN4I_CODEC_DAC_ACTL,
- SUN4I_CODEC_DAC_ACTL_PA_VOL, 0x3F, 0,
- sun4i_codec_pa_volume_scale),
+#define SUN4I_COMMON_CODEC_CONTROLS \
+ SOC_SINGLE_TLV("Power Amplifier Volume", SUN4I_CODEC_DAC_ACTL,\
+ SUN4I_CODEC_DAC_ACTL_PA_VOL, 0x3F, 0,\
+ sun4i_codec_pa_volume_scale)
+
+static const struct snd_kcontrol_new sun4i_codec_controls[] = {
+ SUN4I_COMMON_CODEC_CONTROLS,
+};
+
+static const struct snd_kcontrol_new sun7i_codec_controls[] = {
+ SUN4I_COMMON_CODEC_CONTROLS,
};
static const struct snd_kcontrol_new sun4i_codec_left_mixer_controls[] = {
@@ -629,8 +636,19 @@ static const struct snd_soc_dapm_route sun4i_codec_codec_dapm_routes[] = {
static struct snd_soc_codec_driver sun4i_codec_codec = {
.component_driver = {
- .controls = sun4i_codec_widgets,
- .num_controls = ARRAY_SIZE(sun4i_codec_widgets),
+ .controls = sun4i_codec_controls,
+ .num_controls = ARRAY_SIZE(sun4i_codec_controls),
+ .dapm_widgets = sun4i_codec_codec_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(sun4i_codec_codec_dapm_widgets),
+ .dapm_routes = sun4i_codec_codec_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(sun4i_codec_codec_dapm_routes),
+ },
+};
+
+static struct snd_soc_codec_driver sun7i_codec_codec = {
+ .component_driver = {
+ .controls = sun7i_codec_controls,
+ .num_controls = ARRAY_SIZE(sun7i_codec_controls),
.dapm_widgets = sun4i_codec_codec_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(sun4i_codec_codec_dapm_widgets),
.dapm_routes = sun4i_codec_codec_dapm_routes,
@@ -682,12 +700,34 @@ static const struct regmap_config sun4i_codec_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
- .max_register = SUN4I_CODEC_AC_MIC_PHONE_CAL,
+ .max_register = SUN4I_CODEC_ADC_RXCNT,
+};
+
+static const struct regmap_config sun7i_codec_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = SUN7I_CODEC_AC_MIC_PHONE_CAL,
+};
+
+struct sun4i_quirks {
+ const struct snd_soc_codec_driver *codec;
+ const struct regmap_config *regmap_config;
+};
+
+static const struct sun4i_quirks sun4i_quirks = {
+ .codec = &sun4i_codec_codec,
+ .regmap_config = &sun4i_codec_regmap_config,
+};
+
+static const struct sun4i_quirks sun7i_quirks = {
+ .codec = &sun7i_codec_codec,
+ .regmap_config = &sun7i_codec_regmap_config,
};
static const struct of_device_id sun4i_codec_of_match[] = {
- { .compatible = "allwinner,sun4i-a10-codec" },
- { .compatible = "allwinner,sun7i-a20-codec" },
+ { .compatible = "allwinner,sun4i-a10-codec", .data = &sun4i_quirks },
+ { .compatible = "allwinner,sun7i-a20-codec", .data = &sun7i_quirks },
{}
};
MODULE_DEVICE_TABLE(of, sun4i_codec_of_match);
@@ -760,6 +800,7 @@ static int sun4i_codec_probe(struct platform_device *pdev)
{
struct snd_soc_card *card;
struct sun4i_codec *scodec;
+ struct sun4i_quirks *quirks;
struct resource *res;
void __iomem *base;
int ret;
@@ -777,8 +818,9 @@ static int sun4i_codec_probe(struct platform_device *pdev)
return PTR_ERR(base);
}
+ quirks = of_device_get_match_data(&pdev->dev);
scodec->regmap = devm_regmap_init_mmio(&pdev->dev, base,
- &sun4i_codec_regmap_config);
+ quirks->regmap_config);
if (IS_ERR(scodec->regmap)) {
dev_err(&pdev->dev, "Failed to create our regmap\n");
return PTR_ERR(scodec->regmap);
--
2.1.4
next prev parent reply other threads:[~2016-09-05 19:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-05 19:24 [PATCH] ASoC: sun4i-codec: Distinguish sun4i from sun7i Danny Milosavljevic
2016-09-05 19:24 ` Danny Milosavljevic [this message]
2016-09-06 3:29 ` Chen-Yu Tsai
2016-09-06 6:39 ` Maxime Ripard
2016-09-06 10:28 ` Mark Brown
2016-09-06 0:58 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160905192404.13871-2-dannym@scratchpost.org \
--to=dannym@scratchpost.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).