From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Mon, 5 Sep 2016 22:21:43 +0200 Subject: [PATCH 5/7] ARM: sun8i: a33: Add display pipeline In-Reply-To: References: <20160901153204.11217-1-maxime.ripard@free-electrons.com> <20160901153204.11217-6-maxime.ripard@free-electrons.com> Message-ID: <20160905202143.GC8596@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On Fri, Sep 02, 2016 at 02:28:54PM +0800, Chen-Yu Tsai wrote: > > + be0: display-backend at 01e60000 { > > + compatible = "allwinner,sun8i-a33-display-backend"; > > + reg = <0x01e60000 0x10000>; > > Please also list the interrupt, even though we don't use it yet. > The manual says it's 127 - 32 = 95. Yep, you're right. > > + sat0: sat at 01e80000 { > > + compatible = "allwinner,sun8i-a33-sat"; > > + reg = <0x01e80000 0x1000>; > > + clocks = <&ccu CLK_BUS_SAT>; > > + resets = <&ccu RST_BUS_SAT>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + sat0_in: port at 0 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <0>; > > + > > + sat0_in_fe0: endpoint at 0 { > > + reg = <0>; > > + remote-endpoint = <&fe0_out_sat0>; > > + }; > > + }; > > + > > + sat0_out: port at 1 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <1>; > > + > > + sat0_out_be0: endpoint at 0 { > > + reg = <0>; > > + remote-endpoint = <&be0_in_sat0>; > > + }; > > + }; > > I'm worried about the representation here. > > In the user manuals, the SAT is shown as part of the BE. Look at it > this way: if it did come before the BE and is independent, we > shouldn't have to bring the SAT out of reset for simplefb to work. Indeed. > For comparison, a similar function unit called "CMU" found on the > other post-sun6i SoCs has the same function description as SAT on > the A33. It uses the reserved registers at the beginning of the BE > address space. Hmm, ok, so you would essentially, merge the backend and sat nodes? That wouldn't be very hard to do, i'll do it. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: