[PATCH 1/7] mtd: nand: Create a NAND reset function

[boris.brezillon@free-electrons.com (Boris Brezillon)]

On Tue,  6 Sep 2016 12:39:09 +0200
Sascha Hauer <s.hauer@pengutronix.de> wrote:

> When NAND devices are resetted some initialization may have to be done,
> like for example they have to be configured for the timing mode that
> shall be used. To get a common place where this initialization can be
> implemented create a nand_reset() function. This currently only issues
> a NAND_CMD_RESET to the NAND device. The places issuing this command
> manually are replaced with a call to nand_reset().
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/mtd/nand/nand_base.c | 23 ++++++++++++++++++-----
>  include/linux/mtd/nand.h     |  3 +++
>  2 files changed, 21 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index 77533f7..20151fc 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -948,6 +948,19 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
>  }
>  
>  /**
> + * nand_reset - Reset and initialize a NAND device
> + * @mtd: mtd info
> + *
> + * Returns 0 for success or negative error code otherwise
> + */
> +int nand_reset(struct mtd_info *mtd)

Can we pass a struct nand_chip * here?

> +{
> +	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);

You miss the chip variable.

> +
> +	return 0;
> +}
> +
> +/**
>   * __nand_unlock - [REPLACEABLE] unlocks specified locked blocks
>   * @mtd: mtd info
>   * @ofs: offset to start unlock from
> @@ -1025,7 +1038,7 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>  	 * some operation can also clear the bit 7 of status register
>  	 * eg. erase/program a locked block
>  	 */
> -	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
> +	nand_reset(mtd);
>  
>  	/* Check, if it is write protected */
>  	if (nand_check_wp(mtd)) {
> @@ -1084,7 +1097,7 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>  	 * some operation can also clear the bit 7 of status register
>  	 * eg. erase/program a locked block
>  	 */
> -	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
> +	nand_reset(mtd);
>  
>  	/* Check, if it is write protected */
>  	if (nand_check_wp(mtd)) {
> @@ -2788,7 +2801,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
>  	 * if we don't do this. I have no clue why, but I seem to have 'fixed'
>  	 * it in the doc2000 driver in August 1999.  dwmw2.
>  	 */
> -	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
> +	nand_reset(mtd);
>  
>  	/* Check, if it is write protected */
>  	if (nand_check_wp(mtd)) {
> @@ -3829,7 +3842,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
>  	 * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
>  	 * after power-up.
>  	 */
> -	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
> +	nand_reset(mtd);
>  
>  	/* Send the command for reading device ID */
>  	chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
> @@ -4161,7 +4174,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
>  	for (i = 1; i < maxchips; i++) {
>  		chip->select_chip(mtd, i);
>  		/* See comment in nand_get_flash_type for reset */
> -		chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
> +		nand_reset(mtd);
>  		/* Send the command for reading device ID */
>  		chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
>  		/* Read manufacturer and device IDs */
> diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
> index 8dd6e01..9af9575 100644
> --- a/include/linux/mtd/nand.h
> +++ b/include/linux/mtd/nand.h
> @@ -50,6 +50,9 @@ extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
>  /* unlocks specified locked blocks */
>  extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
>  
> +/* Reset and initialize a NAND device */
> +extern int nand_reset(struct mtd_info *mtd);

The extern keyword is not needed here.

> +
>  /* The maximum number of NAND chips in an array */
>  #define NAND_MAX_CHIPS		8
>