From: stephen.boyd@linaro.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH/REBASED] usb: chipidea: Properly mark little endian descriptors
Date: Tue, 13 Sep 2016 22:53:02 -0700 [thread overview]
Message-ID: <20160914055302.1132-1-stephen.boyd@linaro.org> (raw)
In-Reply-To: <20160914025045.GD30760@b29397-desktop>
The DMA descriptors are little endian, and we do a pretty good
job of handling them with the proper le32_to_cpu() markings, but
we don't actually mark them as __le32. This means checkers like
sparse can't easily find new bugs. Let's mark the members of
structures properly and fix the few places where we're missing
conversions.
Cc: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
Peter Chen wrote:
>
> I am afraid I can't apply for testing
>
> Applying: usb: chipidea: Properly mark little endian descriptors
> fatal: sha1 information is lacking or useless
> (drivers/usb/chipidea/udc.c).
> error: could not build fake ancestor
> Patch failed at 0001 usb: chipidea: Properly mark little endian
> descriptors
> The copy of the patch that failed is found in: .git/rebase-apply/patch
> When you have resolved this problem, run "git am --continue".
> If you prefer to skip this patch, run "git am --skip" instead.
> To restore the original branch and stop patching, run "git am --abort".
>
> Would you please rebase my ci-for-usb-next branch?
Sure no problem. Maybe you shouldn't specify a 3 way merge so that
it attempts to apply without building a fake ancestor? Anyway, here
it is.
drivers/usb/chipidea/udc.c | 6 +++---
drivers/usb/chipidea/udc.h | 12 ++++++------
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 661f43fe0f9e..a9b07befd398 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -365,7 +365,7 @@ static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
if (hwreq->req.length == 0
|| hwreq->req.length % hwep->ep.maxpacket)
mul++;
- node->ptr->token |= mul << __ffs(TD_MULTO);
+ node->ptr->token |= cpu_to_le32(mul << __ffs(TD_MULTO));
}
temp = (u32) (hwreq->req.dma + hwreq->req.actual);
@@ -504,7 +504,7 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
if (hwreq->req.length == 0
|| hwreq->req.length % hwep->ep.maxpacket)
mul++;
- hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
+ hwep->qh.ptr->cap |= cpu_to_le32(mul << __ffs(QH_MULT));
}
ret = hw_ep_prime(ci, hwep->num, hwep->dir,
@@ -529,7 +529,7 @@ static void free_pending_td(struct ci_hw_ep *hwep)
static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
struct td_node *node)
{
- hwep->qh.ptr->td.next = node->dma;
+ hwep->qh.ptr->td.next = cpu_to_le32(node->dma);
hwep->qh.ptr->td.token &=
cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE));
diff --git a/drivers/usb/chipidea/udc.h b/drivers/usb/chipidea/udc.h
index e66df0020bd4..2ecd1174d66c 100644
--- a/drivers/usb/chipidea/udc.h
+++ b/drivers/usb/chipidea/udc.h
@@ -22,11 +22,11 @@
/* DMA layout of transfer descriptors */
struct ci_hw_td {
/* 0 */
- u32 next;
+ __le32 next;
#define TD_TERMINATE BIT(0)
#define TD_ADDR_MASK (0xFFFFFFEUL << 5)
/* 1 */
- u32 token;
+ __le32 token;
#define TD_STATUS (0x00FFUL << 0)
#define TD_STATUS_TR_ERR BIT(3)
#define TD_STATUS_DT_ERR BIT(5)
@@ -36,7 +36,7 @@ struct ci_hw_td {
#define TD_IOC BIT(15)
#define TD_TOTAL_BYTES (0x7FFFUL << 16)
/* 2 */
- u32 page[5];
+ __le32 page[5];
#define TD_CURR_OFFSET (0x0FFFUL << 0)
#define TD_FRAME_NUM (0x07FFUL << 0)
#define TD_RESERVED_MASK (0x0FFFUL << 0)
@@ -45,18 +45,18 @@ struct ci_hw_td {
/* DMA layout of queue heads */
struct ci_hw_qh {
/* 0 */
- u32 cap;
+ __le32 cap;
#define QH_IOS BIT(15)
#define QH_MAX_PKT (0x07FFUL << 16)
#define QH_ZLT BIT(29)
#define QH_MULT (0x0003UL << 30)
#define QH_ISO_MULT(x) ((x >> 11) & 0x03)
/* 1 */
- u32 curr;
+ __le32 curr;
/* 2 - 8 */
struct ci_hw_td td;
/* 9 */
- u32 RESERVED;
+ __le32 RESERVED;
struct usb_ctrlrequest setup;
} __attribute__ ((packed, aligned(4)));
--
2.9.0.rc2.8.ga28705d
next prev parent reply other threads:[~2016-09-14 5:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-13 23:06 [PATCH] usb: chipidea: Properly mark little endian descriptors Stephen Boyd
2016-09-14 2:37 ` Peter Chen
2016-09-14 2:50 ` Peter Chen
2016-09-14 5:53 ` Stephen Boyd [this message]
2016-09-14 6:15 ` [PATCH/REBASED] " Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160914055302.1132-1-stephen.boyd@linaro.org \
--to=stephen.boyd@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).