From: hzpeterchen@gmail.com (Peter Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH/REBASED] usb: chipidea: Properly mark little endian descriptors
Date: Wed, 14 Sep 2016 14:15:35 +0800 [thread overview]
Message-ID: <20160914061534.GF30760@b29397-desktop> (raw)
In-Reply-To: <20160914055302.1132-1-stephen.boyd@linaro.org>
On Tue, Sep 13, 2016 at 10:53:02PM -0700, Stephen Boyd wrote:
> The DMA descriptors are little endian, and we do a pretty good
> job of handling them with the proper le32_to_cpu() markings, but
> we don't actually mark them as __le32. This means checkers like
> sparse can't easily find new bugs. Let's mark the members of
> structures properly and fix the few places where we're missing
> conversions.
>
> Cc: Peter Chen <peter.chen@nxp.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
> ---
>
> Peter Chen wrote:
> >
> > I am afraid I can't apply for testing
> >
> > Applying: usb: chipidea: Properly mark little endian descriptors
> > fatal: sha1 information is lacking or useless
> > (drivers/usb/chipidea/udc.c).
> > error: could not build fake ancestor
> > Patch failed at 0001 usb: chipidea: Properly mark little endian
> > descriptors
> > The copy of the patch that failed is found in: .git/rebase-apply/patch
> > When you have resolved this problem, run "git am --continue".
> > If you prefer to skip this patch, run "git am --skip" instead.
> > To restore the original branch and stop patching, run "git am --abort".
> >
> > Would you please rebase my ci-for-usb-next branch?
>
> Sure no problem. Maybe you shouldn't specify a 3 way merge so that
> it attempts to apply without building a fake ancestor? Anyway, here
> it is.
I tried w/o 3 ways merge, the new one can be applied.
Peter
>
> drivers/usb/chipidea/udc.c | 6 +++---
> drivers/usb/chipidea/udc.h | 12 ++++++------
> 2 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
> index 661f43fe0f9e..a9b07befd398 100644
> --- a/drivers/usb/chipidea/udc.c
> +++ b/drivers/usb/chipidea/udc.c
> @@ -365,7 +365,7 @@ static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
> if (hwreq->req.length == 0
> || hwreq->req.length % hwep->ep.maxpacket)
> mul++;
> - node->ptr->token |= mul << __ffs(TD_MULTO);
> + node->ptr->token |= cpu_to_le32(mul << __ffs(TD_MULTO));
> }
>
> temp = (u32) (hwreq->req.dma + hwreq->req.actual);
> @@ -504,7 +504,7 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
> if (hwreq->req.length == 0
> || hwreq->req.length % hwep->ep.maxpacket)
> mul++;
> - hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
> + hwep->qh.ptr->cap |= cpu_to_le32(mul << __ffs(QH_MULT));
> }
>
> ret = hw_ep_prime(ci, hwep->num, hwep->dir,
> @@ -529,7 +529,7 @@ static void free_pending_td(struct ci_hw_ep *hwep)
> static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
> struct td_node *node)
> {
> - hwep->qh.ptr->td.next = node->dma;
> + hwep->qh.ptr->td.next = cpu_to_le32(node->dma);
> hwep->qh.ptr->td.token &=
> cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE));
>
> diff --git a/drivers/usb/chipidea/udc.h b/drivers/usb/chipidea/udc.h
> index e66df0020bd4..2ecd1174d66c 100644
> --- a/drivers/usb/chipidea/udc.h
> +++ b/drivers/usb/chipidea/udc.h
> @@ -22,11 +22,11 @@
> /* DMA layout of transfer descriptors */
> struct ci_hw_td {
> /* 0 */
> - u32 next;
> + __le32 next;
> #define TD_TERMINATE BIT(0)
> #define TD_ADDR_MASK (0xFFFFFFEUL << 5)
> /* 1 */
> - u32 token;
> + __le32 token;
> #define TD_STATUS (0x00FFUL << 0)
> #define TD_STATUS_TR_ERR BIT(3)
> #define TD_STATUS_DT_ERR BIT(5)
> @@ -36,7 +36,7 @@ struct ci_hw_td {
> #define TD_IOC BIT(15)
> #define TD_TOTAL_BYTES (0x7FFFUL << 16)
> /* 2 */
> - u32 page[5];
> + __le32 page[5];
> #define TD_CURR_OFFSET (0x0FFFUL << 0)
> #define TD_FRAME_NUM (0x07FFUL << 0)
> #define TD_RESERVED_MASK (0x0FFFUL << 0)
> @@ -45,18 +45,18 @@ struct ci_hw_td {
> /* DMA layout of queue heads */
> struct ci_hw_qh {
> /* 0 */
> - u32 cap;
> + __le32 cap;
> #define QH_IOS BIT(15)
> #define QH_MAX_PKT (0x07FFUL << 16)
> #define QH_ZLT BIT(29)
> #define QH_MULT (0x0003UL << 30)
> #define QH_ISO_MULT(x) ((x >> 11) & 0x03)
> /* 1 */
> - u32 curr;
> + __le32 curr;
> /* 2 - 8 */
> struct ci_hw_td td;
> /* 9 */
> - u32 RESERVED;
> + __le32 RESERVED;
> struct usb_ctrlrequest setup;
> } __attribute__ ((packed, aligned(4)));
>
> --
> 2.9.0.rc2.8.ga28705d
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards,
Peter Chen
prev parent reply other threads:[~2016-09-14 6:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-13 23:06 [PATCH] usb: chipidea: Properly mark little endian descriptors Stephen Boyd
2016-09-14 2:37 ` Peter Chen
2016-09-14 2:50 ` Peter Chen
2016-09-14 5:53 ` [PATCH/REBASED] " Stephen Boyd
2016-09-14 6:15 ` Peter Chen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160914061534.GF30760@b29397-desktop \
--to=hzpeterchen@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).