From: helgaas@kernel.org (Bjorn Helgaas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V6 4/5] PCI: thunder: Enable ACPI PCI controller for ThunderX pass2.x silicon version
Date: Tue, 20 Sep 2016 08:08:39 -0500 [thread overview]
Message-ID: <20160920130839.GA13855@localhost> (raw)
In-Reply-To: <d06879a2-d6e9-5d62-77c5-47eff33d9584@semihalf.com>
On Tue, Sep 20, 2016 at 09:06:23AM +0200, Tomasz Nowicki wrote:
> On 19.09.2016 17:45, Bjorn Helgaas wrote:
> >On Fri, Sep 09, 2016 at 09:24:06PM +0200, Tomasz Nowicki wrote:
> >>ThunderX PCIe controller to off-chip devices (so-called PEM) is not fully
> >>compliant with ECAM standard. It uses non-standard configuration space
> >>accessors (see pci_thunder_pem_ops) and custom configuration space granulation
> >>(see bus_shift = 24). In order to access configuration space and
> >>probe PEM as ACPI based PCI host controller we need to add MCFG quirk
> >>infrastructure. This involves:
> >>1. Export PEM pci_thunder_pem_ops structure so it is visible to MCFG quirk
> >> code.
> >>2. New quirk entries for each PEM segment. Each contains platform IDs,
> >> mentioned pci_thunder_pem_ops and CFG resources.
> >>
> >>Quirk is considered for ThunderX silicon pass2.x only which is identified
> >>via MCFG revision 1.
> >
> >Is it really the case that silicon pass2.x has MCFG revision 1, and
> >silicon pass1.x has MCFG revision 2? That just seems backwards.
>
> It is weird but silicon pass2.x is more common and it had MCFG
> revision 1 from the beginning. Unless it is allowed to use MCFG
> revision 0 ? Then we could use MCFG revision 0 for pass1.x
There's no reason to avoid revision 0. The question is really what
firmware is already in the field. We need to accommodate that. We don't
want a situation where kernel version X only works with firmware version Y,
but kernel version X+1 only works with firmware version Y+1.
Bjorn
next prev parent reply other threads:[~2016-09-20 13:08 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-09 19:24 [PATCH V6 0/5] ECAM quirks handling for ARM64 platforms Tomasz Nowicki
2016-09-09 19:24 ` [PATCH V6 1/5] PCI/ACPI: Extend pci_mcfg_lookup() responsibilities Tomasz Nowicki
2016-09-09 19:24 ` [PATCH V6 2/5] PCI/ACPI: Check platform specific ECAM quirks Tomasz Nowicki
2016-09-12 22:24 ` Duc Dang
2016-09-12 22:47 ` Duc Dang
2016-09-13 5:58 ` Tomasz Nowicki
2016-09-13 6:37 ` Tomasz Nowicki
2016-09-13 2:36 ` Dongdong Liu
2016-09-13 6:32 ` Tomasz Nowicki
2016-09-13 11:38 ` Dongdong Liu
2016-09-14 12:40 ` Lorenzo Pieralisi
2016-09-15 10:58 ` Lorenzo Pieralisi
2016-09-16 9:02 ` Gabriele Paoloni
2016-09-16 12:27 ` Christopher Covington
2016-09-16 13:42 ` Gabriele Paoloni
2016-09-09 19:24 ` [PATCH V6 3/5] PCI: thunder-pem: Allow to probe PEM-specific register range for ACPI case Tomasz Nowicki
2016-09-19 18:09 ` Bjorn Helgaas
2016-09-20 7:23 ` Tomasz Nowicki
2016-09-20 13:33 ` Bjorn Helgaas
2016-09-20 13:40 ` Ard Biesheuvel
2016-09-20 14:05 ` Bjorn Helgaas
2016-09-20 15:09 ` Ard Biesheuvel
2016-09-20 19:17 ` Bjorn Helgaas
2016-09-21 14:05 ` Lorenzo Pieralisi
2016-09-21 18:04 ` Bjorn Helgaas
2016-09-21 18:58 ` Duc Dang
2016-09-21 19:18 ` Bjorn Helgaas
2016-09-23 10:53 ` Tomasz Nowicki
2016-09-22 9:49 ` Lorenzo Pieralisi
2016-09-22 11:10 ` Gabriele Paoloni
2016-09-22 12:44 ` Lorenzo Pieralisi
2016-09-22 18:31 ` Bjorn Helgaas
2016-09-22 22:10 ` Bjorn Helgaas
2016-09-23 10:11 ` Lorenzo Pieralisi
2016-09-23 10:58 ` Gabriele Paoloni
2017-09-14 14:06 ` Ard Biesheuvel
2017-09-26 8:23 ` Gabriele Paoloni
2016-09-22 14:20 ` Christopher Covington
2016-09-21 14:10 ` Gabriele Paoloni
2016-09-21 18:59 ` Bjorn Helgaas
2016-09-22 11:12 ` Gabriele Paoloni
2016-09-09 19:24 ` [PATCH V6 4/5] PCI: thunder: Enable ACPI PCI controller for ThunderX pass2.x silicon version Tomasz Nowicki
2016-09-19 15:45 ` Bjorn Helgaas
2016-09-20 7:06 ` Tomasz Nowicki
2016-09-20 13:08 ` Bjorn Helgaas [this message]
2016-09-21 8:05 ` Tomasz Nowicki
2016-09-09 19:24 ` [PATCH V6 5/5] PCI: thunder: Enable ACPI PCI controller for ThunderX pass1.x " Tomasz Nowicki
2016-09-09 19:30 ` [PATCH V6 0/5] ECAM quirks handling for ARM64 platforms Tomasz Nowicki
2016-09-20 19:26 ` Bjorn Helgaas
2016-09-21 1:15 ` cov at codeaurora.org
2016-09-21 13:11 ` Bjorn Helgaas
2016-09-21 14:07 ` Sinan Kaya
2016-09-21 17:31 ` Bjorn Helgaas
2016-09-21 17:34 ` Sinan Kaya
2016-09-21 22:38 ` [PATCHv2] PCI: QDF2432 32 bit config space accessors Christopher Covington
2016-10-31 21:48 ` Bjorn Helgaas
2016-11-01 13:06 ` cov at codeaurora.org
2016-11-02 16:08 ` Bjorn Helgaas
2016-11-02 16:36 ` Sinan Kaya
2016-11-03 14:00 ` Bjorn Helgaas
2016-11-03 16:58 ` Sinan Kaya
2016-11-03 17:06 ` Sinan Kaya
2016-11-03 20:43 ` Bjorn Helgaas
2016-11-03 23:49 ` Sinan Kaya
2016-12-02 4:58 ` Jon Masters
2016-11-02 16:41 ` Bjorn Helgaas
2016-11-09 19:25 ` Christopher Covington
2016-11-09 20:06 ` Bjorn Helgaas
2016-11-09 20:29 ` Ard Biesheuvel
2016-11-09 22:49 ` Bjorn Helgaas
2016-11-10 10:25 ` Ard Biesheuvel
2016-11-10 13:57 ` Lorenzo Pieralisi
2016-11-10 17:42 ` Bjorn Helgaas
2016-12-02 5:12 ` Jon Masters
2016-09-21 22:40 ` [PATCH V6 0/5] ECAM quirks handling for ARM64 platforms Christopher Covington
2016-09-22 23:08 ` Bjorn Helgaas
2016-09-23 18:41 ` Christopher Covington
2016-09-23 19:17 ` Bjorn Helgaas
2016-09-23 19:22 ` Christopher Covington
2016-11-24 11:05 ` [PATCH V6 1/1] ARM64/PCI: Manage controller-specific information on the host controller basis Tomasz Nowicki
2016-11-29 23:40 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160920130839.GA13855@localhost \
--to=helgaas@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).