From mboxrd@z Thu Jan 1 00:00:00 1970 From: richard.genoud@gmail.com (Richard Genoud) Date: Fri, 30 Sep 2016 10:57:58 +0200 Subject: [PATCHv4 0/3] Fix hardware handshake on SAM9x5 platforms Message-ID: <20160930085801.21497-1-richard.genoud@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Since commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled"), hardware handshake is not working anymore on SAM9x5/SAMA5D3/SAM9 platforms. The first two patches fix the hardware handshake when CTS/RTS pins are handled by GPIOs. The last patch fixes hardware handshake when CTS/RTS pins are not GPIOs. Changes since v3: - remove superfuous #include (thanks to Uwe) - rebase on next-20160930 Changes since v2: - remove IS_ERR_OR_NULL() test in patch 1/3 as Uwe suggested. - fix typos in patch 2/3 - rebase on next-20160927 - simplify the logic in patch 3/3. Changes since v1: - Correct patch 1 with the error found by kbuild. - Add Alexandre's Acked-by on patch 2 - Rewrite patch 3 logic in the light of the on-going discussion with Cyrille and Alexandre. NB: patch 2 NEEDS patch 1 to compile. Richard Genoud (3): serial: mctrl_gpio: implement mctrl_gpio_use_rtscts tty/serial: at91: fix hardware handshake with GPIOs tty/serial: at91: fix hardware handshake on SAM9x5 (without GPIOs) drivers/tty/serial/atmel_serial.c | 26 +++++++++++++++++--------- drivers/tty/serial/serial_mctrl_gpio.c | 7 +++++++ drivers/tty/serial/serial_mctrl_gpio.h | 10 ++++++++++ 3 files changed, 34 insertions(+), 9 deletions(-)