[PATCH v1 1/2] ARM: dts: vfxxx: Enable DMA for DSPI on Vybrid

[PATCH v1 1/2] ARM: dts: vfxxx: Enable DMA for DSPI on Vybrid

[Sanchayan Maity]

Enable DMA for DSPI on Vybrid.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
---
 arch/arm/boot/dts/vf-colibri.dtsi | 4 ++++
 arch/arm/boot/dts/vfxxx.dtsi      | 6 ++++++
 2 files changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index b741709..21bfef9 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -108,6 +108,10 @@
 	status = "okay";
 };
 
+&edma1 {
+	status = "okay";
+};
+
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 2c13ec6..eac4213 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -194,6 +194,9 @@
 				clocks = <&clks VF610_CLK_DSPI0>;
 				clock-names = "dspi";
 				spi-num-chipselects = <6>;
+				dmas = <&edma1 1 12>,
+					<&edma1 1 13>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -206,6 +209,9 @@
 				clocks = <&clks VF610_CLK_DSPI1>;
 				clock-names = "dspi";
 				spi-num-chipselects = <4>;
+				dmas = <&edma1 1 14>,
+					<&edma1 1 15>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
-- 
2.10.0

[PATCH v1 2/2] spi: spi-fsl-dspi: Add DMA support for Vybrid

[Sanchayan Maity]

Add DMA support for Vybrid.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
---
 drivers/spi/spi-fsl-dspi.c | 293 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 293 insertions(+)

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 9e9dadb..ada50ee 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -15,6 +15,8 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
@@ -40,6 +42,7 @@
 #define TRAN_STATE_WORD_ODD_NUM	0x04
 
 #define DSPI_FIFO_SIZE			4
+#define DSPI_DMA_BUFSIZE		(DSPI_FIFO_SIZE * 1024)
 
 #define SPI_MCR		0x00
 #define SPI_MCR_MASTER		(1 << 31)
@@ -71,6 +74,11 @@
 #define SPI_SR_EOQF		0x10000000
 #define SPI_SR_TCFQF		0x80000000
 
+#define SPI_RSER_TFFFE		BIT(25)
+#define SPI_RSER_TFFFD		BIT(24)
+#define SPI_RSER_RFDFE		BIT(17)
+#define SPI_RSER_RFDFD		BIT(16)
+
 #define SPI_RSER		0x30
 #define SPI_RSER_EOQFE		0x10000000
 #define SPI_RSER_TCFQE		0x80000000
@@ -108,6 +116,8 @@
 
 #define SPI_TCR_TCNT_MAX	0x10000
 
+#define DMA_COMPLETION_TIMEOUT	msecs_to_jiffies(3000)
+
 struct chip_data {
 	u32 mcr_val;
 	u32 ctar_val;
@@ -117,6 +127,7 @@ struct chip_data {
 enum dspi_trans_mode {
 	DSPI_EOQ_MODE = 0,
 	DSPI_TCFQ_MODE,
+	DSPI_DMA_MODE,
 };
 
 struct fsl_dspi_devtype_data {
@@ -139,6 +150,22 @@ static const struct fsl_dspi_devtype_data ls2085a_data = {
 	.max_clock_factor = 8,
 };
 
+struct fsl_dspi_dma {
+	u32 curr_xfer_len;
+
+	u32 *tx_dma_buf;
+	struct dma_chan *chan_tx;
+	dma_addr_t tx_dma_phys;
+	struct completion cmd_tx_complete;
+	struct dma_async_tx_descriptor *tx_desc;
+
+	u32 *rx_dma_buf;
+	struct dma_chan *chan_rx;
+	dma_addr_t rx_dma_phys;
+	struct completion cmd_rx_complete;
+	struct dma_async_tx_descriptor *rx_desc;
+};
+
 struct fsl_dspi {
 	struct spi_master	*master;
 	struct platform_device	*pdev;
@@ -165,6 +192,7 @@ struct fsl_dspi {
 	u32			waitflags;
 
 	u32			spi_tcnt;
+	struct fsl_dspi_dma	*dma;
 };
 
 static inline int is_double_byte_mode(struct fsl_dspi *dspi)
@@ -368,6 +396,264 @@ static void dspi_tcfq_read(struct fsl_dspi *dspi)
 	dspi_data_from_popr(dspi, rx_word);
 }
 
+static void dspi_tx_dma_callback(void *arg)
+{
+	struct fsl_dspi *dspi = arg;
+	struct fsl_dspi_dma *dma = dspi->dma;
+
+	complete(&dma->cmd_tx_complete);
+}
+
+static void dspi_rx_dma_callback(void *arg)
+{
+	struct fsl_dspi *dspi = arg;
+	struct fsl_dspi_dma *dma = dspi->dma;
+	int rx_word;
+	int i, len;
+	u16 d;
+
+	rx_word = is_double_byte_mode(dspi);
+
+	len = rx_word ? (dma->curr_xfer_len / 2) : dma->curr_xfer_len;
+
+	if (!(dspi->dataflags & TRAN_STATE_RX_VOID)) {
+		for (i = 0; i < len; i++) {
+			d = dspi->dma->rx_dma_buf[i];
+			rx_word ? (*(u16 *)dspi->rx = d) :
+						(*(u8 *)dspi->rx = d);
+			dspi->rx += rx_word + 1;
+		}
+	}
+
+	complete(&dma->cmd_rx_complete);
+}
+
+static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi)
+{
+	struct fsl_dspi_dma *dma = dspi->dma;
+	struct device *dev = &dspi->pdev->dev;
+	int time_left;
+	int tx_word;
+	int i, len;
+	u16 val;
+
+	tx_word = is_double_byte_mode(dspi);
+
+	len = tx_word ? (dma->curr_xfer_len / 2) : dma->curr_xfer_len;
+
+	for (i = 0; i < len - 1; i++) {
+		val = tx_word ? *(u16 *) dspi->tx : *(u8 *) dspi->tx;
+		dspi->dma->tx_dma_buf[i] =
+			SPI_PUSHR_TXDATA(val) | SPI_PUSHR_PCS(dspi->cs) |
+			SPI_PUSHR_CTAS(0) | SPI_PUSHR_CONT;
+		dspi->tx += tx_word + 1;
+	}
+
+	val = tx_word ? *(u16 *) dspi->tx : *(u8 *) dspi->tx;
+	dspi->dma->tx_dma_buf[i] = SPI_PUSHR_TXDATA(val) |
+					SPI_PUSHR_PCS(dspi->cs) |
+					SPI_PUSHR_CTAS(0);
+	dspi->tx += tx_word + 1;
+
+	dma->tx_desc = dmaengine_prep_slave_single(dma->chan_tx,
+					dma->tx_dma_phys,
+					DSPI_DMA_BUFSIZE, DMA_MEM_TO_DEV,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!dma->tx_desc) {
+		dev_err(dev, "Not able to get desc for DMA xfer\n");
+		return -EIO;
+	}
+
+	dma->tx_desc->callback = dspi_tx_dma_callback;
+	dma->tx_desc->callback_param = dspi;
+	if (dma_submit_error(dmaengine_submit(dma->tx_desc))) {
+		dev_err(dev, "DMA submit failed\n");
+		return -EINVAL;
+	}
+
+	dma->rx_desc = dmaengine_prep_slave_single(dma->chan_rx,
+					dma->rx_dma_phys,
+					DSPI_DMA_BUFSIZE, DMA_DEV_TO_MEM,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!dma->rx_desc) {
+		dev_err(dev, "Not able to get desc for DMA xfer\n");
+		return -EIO;
+	}
+
+	dma->rx_desc->callback = dspi_rx_dma_callback;
+	dma->rx_desc->callback_param = dspi;
+	if (dma_submit_error(dmaengine_submit(dma->rx_desc))) {
+		dev_err(dev, "DMA submit failed\n");
+		return -EINVAL;
+	}
+
+	reinit_completion(&dspi->dma->cmd_rx_complete);
+	reinit_completion(&dspi->dma->cmd_tx_complete);
+
+	dma_async_issue_pending(dma->chan_rx);
+	dma_async_issue_pending(dma->chan_tx);
+
+	time_left = wait_for_completion_timeout(&dspi->dma->cmd_tx_complete,
+					DMA_COMPLETION_TIMEOUT);
+	if (time_left == 0) {
+		dev_err(dev, "DMA tx timeout\n");
+		dmaengine_terminate_all(dma->chan_tx);
+		dmaengine_terminate_all(dma->chan_rx);
+		return -ETIMEDOUT;
+	}
+
+	time_left = wait_for_completion_timeout(&dspi->dma->cmd_rx_complete,
+					DMA_COMPLETION_TIMEOUT);
+	if (time_left == 0) {
+		dev_err(dev, "DMA rx timeout\n");
+		dmaengine_terminate_all(dma->chan_tx);
+		dmaengine_terminate_all(dma->chan_rx);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int dspi_dma_xfer(struct fsl_dspi *dspi)
+{
+	struct fsl_dspi_dma *dma = dspi->dma;
+	struct device *dev = &dspi->pdev->dev;
+	int curr_remaining_bytes;
+	int ret = 0;
+
+	curr_remaining_bytes = dspi->len;
+	while (curr_remaining_bytes) {
+		regmap_write(dspi->regmap, SPI_RSER, 0);
+		regmap_write(dspi->regmap, SPI_RSER,
+			SPI_RSER_TFFFE | SPI_RSER_TFFFD |
+			SPI_RSER_RFDFE | SPI_RSER_RFDFD);
+
+		/* Check if current transfer fits the DMA buffer */
+		dma->curr_xfer_len = curr_remaining_bytes;
+		if (curr_remaining_bytes > DSPI_DMA_BUFSIZE / sizeof(u32))
+			dma->curr_xfer_len = DSPI_DMA_BUFSIZE / sizeof(u32);
+
+		ret = dspi_next_xfer_dma_submit(dspi);
+		if (ret) {
+			dev_err(dev, "DMA transfer failed\n");
+			goto exit;
+
+		} else {
+			curr_remaining_bytes -= dma->curr_xfer_len;
+			if (curr_remaining_bytes < 0)
+				curr_remaining_bytes = 0;
+			dspi->len = curr_remaining_bytes;
+		}
+	}
+
+exit:
+	return ret;
+}
+
+static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
+{
+	struct fsl_dspi_dma *dma;
+	struct dma_slave_config cfg;
+	struct device *dev = &dspi->pdev->dev;
+	int ret;
+
+	dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
+	if (!dma)
+		return -ENOMEM;
+
+	dma->chan_rx = dma_request_slave_channel(dev, "rx");
+	if (!dma->chan_rx) {
+		dev_err(dev, "rx dma channel not available\n");
+		ret = -ENODEV;
+		return ret;
+	}
+
+	dma->chan_tx = dma_request_slave_channel(dev, "tx");
+	if (!dma->chan_tx) {
+		dev_err(dev, "tx dma channel not available\n");
+		ret = -ENODEV;
+		goto err_tx_channel;
+	}
+
+	dma->tx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE,
+					&dma->tx_dma_phys, GFP_KERNEL);
+	if (!dma->tx_dma_buf) {
+		ret = -ENOMEM;
+		goto err_tx_dma_buf;
+	}
+
+	dma->rx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE,
+					&dma->rx_dma_phys, GFP_KERNEL);
+	if (!dma->rx_dma_buf) {
+		ret = -ENOMEM;
+		goto err_rx_dma_buf;
+	}
+
+	cfg.src_addr = phy_addr + SPI_POPR;
+	cfg.dst_addr = phy_addr + SPI_PUSHR;
+	cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	cfg.src_maxburst = 1;
+	cfg.dst_maxburst = 1;
+
+	cfg.direction = DMA_DEV_TO_MEM;
+	ret = dmaengine_slave_config(dma->chan_rx, &cfg);
+	if (ret) {
+		dev_err(dev, "can't configure rx dma channel\n");
+		ret = -EINVAL;
+		goto err_slave_config;
+	}
+
+	cfg.direction = DMA_MEM_TO_DEV;
+	ret = dmaengine_slave_config(dma->chan_tx, &cfg);
+	if (ret) {
+		dev_err(dev, "can't configure tx dma channel\n");
+		ret = -EINVAL;
+		goto err_slave_config;
+	}
+
+	dspi->dma = dma;
+	dspi->devtype_data->trans_mode = DSPI_DMA_MODE;
+	init_completion(&dma->cmd_tx_complete);
+	init_completion(&dma->cmd_rx_complete);
+
+	return 0;
+
+err_slave_config:
+	devm_kfree(dev, dma->rx_dma_buf);
+err_rx_dma_buf:
+	devm_kfree(dev, dma->tx_dma_buf);
+err_tx_dma_buf:
+	dma_release_channel(dma->chan_tx);
+err_tx_channel:
+	dma_release_channel(dma->chan_rx);
+
+	devm_kfree(dev, dma);
+	dspi->dma = NULL;
+
+	return ret;
+}
+
+static void dspi_release_dma(struct fsl_dspi *dspi)
+{
+	struct fsl_dspi_dma *dma = dspi->dma;
+	struct device *dev = &dspi->pdev->dev;
+
+	if (dma) {
+		if (dma->chan_tx) {
+			dma_unmap_single(dev, dma->tx_dma_phys,
+					DSPI_DMA_BUFSIZE, DMA_TO_DEVICE);
+			dma_release_channel(dma->chan_tx);
+		}
+
+		if (dma->chan_rx) {
+			dma_unmap_single(dev, dma->rx_dma_phys,
+					DSPI_DMA_BUFSIZE, DMA_FROM_DEVICE);
+			dma_release_channel(dma->chan_rx);
+		}
+	}
+}
+
 static int dspi_transfer_one_message(struct spi_master *master,
 		struct spi_message *message)
 {
@@ -424,6 +710,9 @@ static int dspi_transfer_one_message(struct spi_master *master,
 			regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_TCFQE);
 			dspi_tcfq_write(dspi);
 			break;
+		case DSPI_DMA_MODE:
+			status = dspi_dma_xfer(dspi);
+			goto out;
 		default:
 			dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
 				trans_mode);
@@ -730,6 +1019,9 @@ static int dspi_probe(struct platform_device *pdev)
 	}
 	clk_prepare_enable(dspi->clk);
 
+	if (dspi_request_dma(dspi, res->start))
+		dev_warn(&pdev->dev, "can't get dma channels\n");
+
 	master->max_speed_hz =
 		clk_get_rate(dspi->clk) / dspi->devtype_data->max_clock_factor;
 
@@ -758,6 +1050,7 @@ static int dspi_remove(struct platform_device *pdev)
 	struct fsl_dspi *dspi = spi_master_get_devdata(master);
 
 	/* Disconnect from the SPI framework */
+	dspi_release_dma(dspi);
 	clk_disable_unprepare(dspi->clk);
 	spi_unregister_master(dspi->master);
 	spi_master_put(dspi->master);
-- 
2.10.0

[PATCH v2] spi: spi-fsl-dspi: Add DMA support for Vybrid

[Sanchayan Maity]

Add DMA support for Vybrid.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
---
Changes since v1:
- Change in the dspi_dma_xfer function. Use more apt DSPI_FIFO_SIZE
instead of sizeof(u32)
- Do not set RSER on every iteration of loop

Tested on Toradex Colibri Vybrid VF61 module with spi based MCP CAN 251x
and spidev using RX/TX loopback and based on shawn's for-next branch
currently at 4.8-rc1.

Regards,
Sanchayan.
---
 drivers/spi/spi-fsl-dspi.c | 291 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 291 insertions(+)

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 9e9dadb..0f81075 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -15,6 +15,8 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
@@ -40,6 +42,7 @@
 #define TRAN_STATE_WORD_ODD_NUM	0x04
 
 #define DSPI_FIFO_SIZE			4
+#define DSPI_DMA_BUFSIZE		(DSPI_FIFO_SIZE * 1024)
 
 #define SPI_MCR		0x00
 #define SPI_MCR_MASTER		(1 << 31)
@@ -71,6 +74,11 @@
 #define SPI_SR_EOQF		0x10000000
 #define SPI_SR_TCFQF		0x80000000
 
+#define SPI_RSER_TFFFE		BIT(25)
+#define SPI_RSER_TFFFD		BIT(24)
+#define SPI_RSER_RFDFE		BIT(17)
+#define SPI_RSER_RFDFD		BIT(16)
+
 #define SPI_RSER		0x30
 #define SPI_RSER_EOQFE		0x10000000
 #define SPI_RSER_TCFQE		0x80000000
@@ -108,6 +116,8 @@
 
 #define SPI_TCR_TCNT_MAX	0x10000
 
+#define DMA_COMPLETION_TIMEOUT	msecs_to_jiffies(3000)
+
 struct chip_data {
 	u32 mcr_val;
 	u32 ctar_val;
@@ -117,6 +127,7 @@ struct chip_data {
 enum dspi_trans_mode {
 	DSPI_EOQ_MODE = 0,
 	DSPI_TCFQ_MODE,
+	DSPI_DMA_MODE,
 };
 
 struct fsl_dspi_devtype_data {
@@ -139,6 +150,22 @@ static const struct fsl_dspi_devtype_data ls2085a_data = {
 	.max_clock_factor = 8,
 };
 
+struct fsl_dspi_dma {
+	u32 curr_xfer_len;
+
+	u32 *tx_dma_buf;
+	struct dma_chan *chan_tx;
+	dma_addr_t tx_dma_phys;
+	struct completion cmd_tx_complete;
+	struct dma_async_tx_descriptor *tx_desc;
+
+	u32 *rx_dma_buf;
+	struct dma_chan *chan_rx;
+	dma_addr_t rx_dma_phys;
+	struct completion cmd_rx_complete;
+	struct dma_async_tx_descriptor *rx_desc;
+};
+
 struct fsl_dspi {
 	struct spi_master	*master;
 	struct platform_device	*pdev;
@@ -165,6 +192,7 @@ struct fsl_dspi {
 	u32			waitflags;
 
 	u32			spi_tcnt;
+	struct fsl_dspi_dma	*dma;
 };
 
 static inline int is_double_byte_mode(struct fsl_dspi *dspi)
@@ -368,6 +396,259 @@ static void dspi_tcfq_read(struct fsl_dspi *dspi)
 	dspi_data_from_popr(dspi, rx_word);
 }
 
+static void dspi_tx_dma_callback(void *arg)
+{
+	struct fsl_dspi *dspi = arg;
+	struct fsl_dspi_dma *dma = dspi->dma;
+
+	complete(&dma->cmd_tx_complete);
+}
+
+static void dspi_rx_dma_callback(void *arg)
+{
+	struct fsl_dspi *dspi = arg;
+	struct fsl_dspi_dma *dma = dspi->dma;
+	int rx_word;
+	int i, len;
+	u16 d;
+
+	rx_word = is_double_byte_mode(dspi);
+
+	len = rx_word ? (dma->curr_xfer_len / 2) : dma->curr_xfer_len;
+
+	if (!(dspi->dataflags & TRAN_STATE_RX_VOID)) {
+		for (i = 0; i < len; i++) {
+			d = dspi->dma->rx_dma_buf[i];
+			rx_word ? (*(u16 *)dspi->rx = d) :
+						(*(u8 *)dspi->rx = d);
+			dspi->rx += rx_word + 1;
+		}
+	}
+
+	complete(&dma->cmd_rx_complete);
+}
+
+static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi)
+{
+	struct fsl_dspi_dma *dma = dspi->dma;
+	struct device *dev = &dspi->pdev->dev;
+	int time_left;
+	int tx_word;
+	int i, len;
+	u16 val;
+
+	tx_word = is_double_byte_mode(dspi);
+
+	len = tx_word ? (dma->curr_xfer_len / 2) : dma->curr_xfer_len;
+
+	for (i = 0; i < len - 1; i++) {
+		val = tx_word ? *(u16 *) dspi->tx : *(u8 *) dspi->tx;
+		dspi->dma->tx_dma_buf[i] =
+			SPI_PUSHR_TXDATA(val) | SPI_PUSHR_PCS(dspi->cs) |
+			SPI_PUSHR_CTAS(0) | SPI_PUSHR_CONT;
+		dspi->tx += tx_word + 1;
+	}
+
+	val = tx_word ? *(u16 *) dspi->tx : *(u8 *) dspi->tx;
+	dspi->dma->tx_dma_buf[i] = SPI_PUSHR_TXDATA(val) |
+					SPI_PUSHR_PCS(dspi->cs) |
+					SPI_PUSHR_CTAS(0);
+	dspi->tx += tx_word + 1;
+
+	dma->tx_desc = dmaengine_prep_slave_single(dma->chan_tx,
+					dma->tx_dma_phys,
+					DSPI_DMA_BUFSIZE, DMA_MEM_TO_DEV,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!dma->tx_desc) {
+		dev_err(dev, "Not able to get desc for DMA xfer\n");
+		return -EIO;
+	}
+
+	dma->tx_desc->callback = dspi_tx_dma_callback;
+	dma->tx_desc->callback_param = dspi;
+	if (dma_submit_error(dmaengine_submit(dma->tx_desc))) {
+		dev_err(dev, "DMA submit failed\n");
+		return -EINVAL;
+	}
+
+	dma->rx_desc = dmaengine_prep_slave_single(dma->chan_rx,
+					dma->rx_dma_phys,
+					DSPI_DMA_BUFSIZE, DMA_DEV_TO_MEM,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!dma->rx_desc) {
+		dev_err(dev, "Not able to get desc for DMA xfer\n");
+		return -EIO;
+	}
+
+	dma->rx_desc->callback = dspi_rx_dma_callback;
+	dma->rx_desc->callback_param = dspi;
+	if (dma_submit_error(dmaengine_submit(dma->rx_desc))) {
+		dev_err(dev, "DMA submit failed\n");
+		return -EINVAL;
+	}
+
+	reinit_completion(&dspi->dma->cmd_rx_complete);
+	reinit_completion(&dspi->dma->cmd_tx_complete);
+
+	dma_async_issue_pending(dma->chan_rx);
+	dma_async_issue_pending(dma->chan_tx);
+
+	time_left = wait_for_completion_timeout(&dspi->dma->cmd_tx_complete,
+					DMA_COMPLETION_TIMEOUT);
+	if (time_left == 0) {
+		dev_err(dev, "DMA tx timeout\n");
+		dmaengine_terminate_all(dma->chan_tx);
+		dmaengine_terminate_all(dma->chan_rx);
+		return -ETIMEDOUT;
+	}
+
+	time_left = wait_for_completion_timeout(&dspi->dma->cmd_rx_complete,
+					DMA_COMPLETION_TIMEOUT);
+	if (time_left == 0) {
+		dev_err(dev, "DMA rx timeout\n");
+		dmaengine_terminate_all(dma->chan_tx);
+		dmaengine_terminate_all(dma->chan_rx);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int dspi_dma_xfer(struct fsl_dspi *dspi)
+{
+	struct fsl_dspi_dma *dma = dspi->dma;
+	struct device *dev = &dspi->pdev->dev;
+	int curr_remaining_bytes;
+	int ret = 0;
+
+	curr_remaining_bytes = dspi->len;
+	while (curr_remaining_bytes) {
+		/* Check if current transfer fits the DMA buffer */
+		dma->curr_xfer_len = curr_remaining_bytes;
+		if (curr_remaining_bytes > DSPI_DMA_BUFSIZE / DSPI_FIFO_SIZE)
+			dma->curr_xfer_len = DSPI_DMA_BUFSIZE / DSPI_FIFO_SIZE;
+
+		ret = dspi_next_xfer_dma_submit(dspi);
+		if (ret) {
+			dev_err(dev, "DMA transfer failed\n");
+			goto exit;
+
+		} else {
+			curr_remaining_bytes -= dma->curr_xfer_len;
+			if (curr_remaining_bytes < 0)
+				curr_remaining_bytes = 0;
+			dspi->len = curr_remaining_bytes;
+		}
+	}
+
+exit:
+	return ret;
+}
+
+static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
+{
+	struct fsl_dspi_dma *dma;
+	struct dma_slave_config cfg;
+	struct device *dev = &dspi->pdev->dev;
+	int ret;
+
+	dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
+	if (!dma)
+		return -ENOMEM;
+
+	dma->chan_rx = dma_request_slave_channel(dev, "rx");
+	if (!dma->chan_rx) {
+		dev_err(dev, "rx dma channel not available\n");
+		ret = -ENODEV;
+		return ret;
+	}
+
+	dma->chan_tx = dma_request_slave_channel(dev, "tx");
+	if (!dma->chan_tx) {
+		dev_err(dev, "tx dma channel not available\n");
+		ret = -ENODEV;
+		goto err_tx_channel;
+	}
+
+	dma->tx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE,
+					&dma->tx_dma_phys, GFP_KERNEL);
+	if (!dma->tx_dma_buf) {
+		ret = -ENOMEM;
+		goto err_tx_dma_buf;
+	}
+
+	dma->rx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE,
+					&dma->rx_dma_phys, GFP_KERNEL);
+	if (!dma->rx_dma_buf) {
+		ret = -ENOMEM;
+		goto err_rx_dma_buf;
+	}
+
+	cfg.src_addr = phy_addr + SPI_POPR;
+	cfg.dst_addr = phy_addr + SPI_PUSHR;
+	cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	cfg.src_maxburst = 1;
+	cfg.dst_maxburst = 1;
+
+	cfg.direction = DMA_DEV_TO_MEM;
+	ret = dmaengine_slave_config(dma->chan_rx, &cfg);
+	if (ret) {
+		dev_err(dev, "can't configure rx dma channel\n");
+		ret = -EINVAL;
+		goto err_slave_config;
+	}
+
+	cfg.direction = DMA_MEM_TO_DEV;
+	ret = dmaengine_slave_config(dma->chan_tx, &cfg);
+	if (ret) {
+		dev_err(dev, "can't configure tx dma channel\n");
+		ret = -EINVAL;
+		goto err_slave_config;
+	}
+
+	dspi->dma = dma;
+	dspi->devtype_data->trans_mode = DSPI_DMA_MODE;
+	init_completion(&dma->cmd_tx_complete);
+	init_completion(&dma->cmd_rx_complete);
+
+	return 0;
+
+err_slave_config:
+	devm_kfree(dev, dma->rx_dma_buf);
+err_rx_dma_buf:
+	devm_kfree(dev, dma->tx_dma_buf);
+err_tx_dma_buf:
+	dma_release_channel(dma->chan_tx);
+err_tx_channel:
+	dma_release_channel(dma->chan_rx);
+
+	devm_kfree(dev, dma);
+	dspi->dma = NULL;
+
+	return ret;
+}
+
+static void dspi_release_dma(struct fsl_dspi *dspi)
+{
+	struct fsl_dspi_dma *dma = dspi->dma;
+	struct device *dev = &dspi->pdev->dev;
+
+	if (dma) {
+		if (dma->chan_tx) {
+			dma_unmap_single(dev, dma->tx_dma_phys,
+					DSPI_DMA_BUFSIZE, DMA_TO_DEVICE);
+			dma_release_channel(dma->chan_tx);
+		}
+
+		if (dma->chan_rx) {
+			dma_unmap_single(dev, dma->rx_dma_phys,
+					DSPI_DMA_BUFSIZE, DMA_FROM_DEVICE);
+			dma_release_channel(dma->chan_rx);
+		}
+	}
+}
+
 static int dspi_transfer_one_message(struct spi_master *master,
 		struct spi_message *message)
 {
@@ -424,6 +705,12 @@ static int dspi_transfer_one_message(struct spi_master *master,
 			regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_TCFQE);
 			dspi_tcfq_write(dspi);
 			break;
+		case DSPI_DMA_MODE:
+			regmap_write(dspi->regmap, SPI_RSER,
+				SPI_RSER_TFFFE | SPI_RSER_TFFFD |
+				SPI_RSER_RFDFE | SPI_RSER_RFDFD);
+			status = dspi_dma_xfer(dspi);
+			goto out;
 		default:
 			dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
 				trans_mode);
@@ -730,6 +1017,9 @@ static int dspi_probe(struct platform_device *pdev)
 	}
 	clk_prepare_enable(dspi->clk);
 
+	if (dspi_request_dma(dspi, res->start))
+		dev_warn(&pdev->dev, "can't get dma channels\n");
+
 	master->max_speed_hz =
 		clk_get_rate(dspi->clk) / dspi->devtype_data->max_clock_factor;
 
@@ -758,6 +1048,7 @@ static int dspi_remove(struct platform_device *pdev)
 	struct fsl_dspi *dspi = spi_master_get_devdata(master);
 
 	/* Disconnect from the SPI framework */
+	dspi_release_dma(dspi);
 	clk_disable_unprepare(dspi->clk);
 	spi_unregister_master(dspi->master);
 	spi_master_put(dspi->master);
-- 
2.10.0

[PATCH v2] spi: spi-fsl-dspi: Add DMA support for Vybrid

[maitysanchayan at gmail.com]

Hello,

Ping?

Regards,
Sanchayan.

On 16-10-04 16:28:33, Sanchayan Maity wrote:
> Add DMA support for Vybrid.
> 
> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
> ---
> Changes since v1:
> - Change in the dspi_dma_xfer function. Use more apt DSPI_FIFO_SIZE
> instead of sizeof(u32)
> - Do not set RSER on every iteration of loop
> 
> Tested on Toradex Colibri Vybrid VF61 module with spi based MCP CAN 251x
> and spidev using RX/TX loopback and based on shawn's for-next branch
> currently at 4.8-rc1.
> 
> Regards,
> Sanchayan.
> ---
>  drivers/spi/spi-fsl-dspi.c | 291 +++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 291 insertions(+)
> 
> diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
> index 9e9dadb..0f81075 100644
> --- a/drivers/spi/spi-fsl-dspi.c
> +++ b/drivers/spi/spi-fsl-dspi.c
> @@ -15,6 +15,8 @@
>  
>  #include <linux/clk.h>
>  #include <linux/delay.h>
> +#include <linux/dmaengine.h>
> +#include <linux/dma-mapping.h>
>  #include <linux/err.h>
>  #include <linux/errno.h>
>  #include <linux/interrupt.h>
> @@ -40,6 +42,7 @@
>  #define TRAN_STATE_WORD_ODD_NUM	0x04
>  
>  #define DSPI_FIFO_SIZE			4
> +#define DSPI_DMA_BUFSIZE		(DSPI_FIFO_SIZE * 1024)
>  
>  #define SPI_MCR		0x00
>  #define SPI_MCR_MASTER		(1 << 31)
> @@ -71,6 +74,11 @@
>  #define SPI_SR_EOQF		0x10000000
>  #define SPI_SR_TCFQF		0x80000000
>  
> +#define SPI_RSER_TFFFE		BIT(25)
> +#define SPI_RSER_TFFFD		BIT(24)
> +#define SPI_RSER_RFDFE		BIT(17)
> +#define SPI_RSER_RFDFD		BIT(16)
> +
>  #define SPI_RSER		0x30
>  #define SPI_RSER_EOQFE		0x10000000
>  #define SPI_RSER_TCFQE		0x80000000
> @@ -108,6 +116,8 @@
>  
>  #define SPI_TCR_TCNT_MAX	0x10000
>  
> +#define DMA_COMPLETION_TIMEOUT	msecs_to_jiffies(3000)
> +
>  struct chip_data {
>  	u32 mcr_val;
>  	u32 ctar_val;
> @@ -117,6 +127,7 @@ struct chip_data {
>  enum dspi_trans_mode {
>  	DSPI_EOQ_MODE = 0,
>  	DSPI_TCFQ_MODE,
> +	DSPI_DMA_MODE,
>  };
>  
>  struct fsl_dspi_devtype_data {
> @@ -139,6 +150,22 @@ static const struct fsl_dspi_devtype_data ls2085a_data = {
>  	.max_clock_factor = 8,
>  };
>  
> +struct fsl_dspi_dma {
> +	u32 curr_xfer_len;
> +
> +	u32 *tx_dma_buf;
> +	struct dma_chan *chan_tx;
> +	dma_addr_t tx_dma_phys;
> +	struct completion cmd_tx_complete;
> +	struct dma_async_tx_descriptor *tx_desc;
> +
> +	u32 *rx_dma_buf;
> +	struct dma_chan *chan_rx;
> +	dma_addr_t rx_dma_phys;
> +	struct completion cmd_rx_complete;
> +	struct dma_async_tx_descriptor *rx_desc;
> +};
> +
>  struct fsl_dspi {
>  	struct spi_master	*master;
>  	struct platform_device	*pdev;
> @@ -165,6 +192,7 @@ struct fsl_dspi {
>  	u32			waitflags;
>  
>  	u32			spi_tcnt;
> +	struct fsl_dspi_dma	*dma;
>  };
>  
>  static inline int is_double_byte_mode(struct fsl_dspi *dspi)
> @@ -368,6 +396,259 @@ static void dspi_tcfq_read(struct fsl_dspi *dspi)
>  	dspi_data_from_popr(dspi, rx_word);
>  }
>  
> +static void dspi_tx_dma_callback(void *arg)
> +{
> +	struct fsl_dspi *dspi = arg;
> +	struct fsl_dspi_dma *dma = dspi->dma;
> +
> +	complete(&dma->cmd_tx_complete);
> +}
> +
> +static void dspi_rx_dma_callback(void *arg)
> +{
> +	struct fsl_dspi *dspi = arg;
> +	struct fsl_dspi_dma *dma = dspi->dma;
> +	int rx_word;
> +	int i, len;
> +	u16 d;
> +
> +	rx_word = is_double_byte_mode(dspi);
> +
> +	len = rx_word ? (dma->curr_xfer_len / 2) : dma->curr_xfer_len;
> +
> +	if (!(dspi->dataflags & TRAN_STATE_RX_VOID)) {
> +		for (i = 0; i < len; i++) {
> +			d = dspi->dma->rx_dma_buf[i];
> +			rx_word ? (*(u16 *)dspi->rx = d) :
> +						(*(u8 *)dspi->rx = d);
> +			dspi->rx += rx_word + 1;
> +		}
> +	}
> +
> +	complete(&dma->cmd_rx_complete);
> +}
> +
> +static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi)
> +{
> +	struct fsl_dspi_dma *dma = dspi->dma;
> +	struct device *dev = &dspi->pdev->dev;
> +	int time_left;
> +	int tx_word;
> +	int i, len;
> +	u16 val;
> +
> +	tx_word = is_double_byte_mode(dspi);
> +
> +	len = tx_word ? (dma->curr_xfer_len / 2) : dma->curr_xfer_len;
> +
> +	for (i = 0; i < len - 1; i++) {
> +		val = tx_word ? *(u16 *) dspi->tx : *(u8 *) dspi->tx;
> +		dspi->dma->tx_dma_buf[i] =
> +			SPI_PUSHR_TXDATA(val) | SPI_PUSHR_PCS(dspi->cs) |
> +			SPI_PUSHR_CTAS(0) | SPI_PUSHR_CONT;
> +		dspi->tx += tx_word + 1;
> +	}
> +
> +	val = tx_word ? *(u16 *) dspi->tx : *(u8 *) dspi->tx;
> +	dspi->dma->tx_dma_buf[i] = SPI_PUSHR_TXDATA(val) |
> +					SPI_PUSHR_PCS(dspi->cs) |
> +					SPI_PUSHR_CTAS(0);
> +	dspi->tx += tx_word + 1;
> +
> +	dma->tx_desc = dmaengine_prep_slave_single(dma->chan_tx,
> +					dma->tx_dma_phys,
> +					DSPI_DMA_BUFSIZE, DMA_MEM_TO_DEV,
> +					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> +	if (!dma->tx_desc) {
> +		dev_err(dev, "Not able to get desc for DMA xfer\n");
> +		return -EIO;
> +	}
> +
> +	dma->tx_desc->callback = dspi_tx_dma_callback;
> +	dma->tx_desc->callback_param = dspi;
> +	if (dma_submit_error(dmaengine_submit(dma->tx_desc))) {
> +		dev_err(dev, "DMA submit failed\n");
> +		return -EINVAL;
> +	}
> +
> +	dma->rx_desc = dmaengine_prep_slave_single(dma->chan_rx,
> +					dma->rx_dma_phys,
> +					DSPI_DMA_BUFSIZE, DMA_DEV_TO_MEM,
> +					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> +	if (!dma->rx_desc) {
> +		dev_err(dev, "Not able to get desc for DMA xfer\n");
> +		return -EIO;
> +	}
> +
> +	dma->rx_desc->callback = dspi_rx_dma_callback;
> +	dma->rx_desc->callback_param = dspi;
> +	if (dma_submit_error(dmaengine_submit(dma->rx_desc))) {
> +		dev_err(dev, "DMA submit failed\n");
> +		return -EINVAL;
> +	}
> +
> +	reinit_completion(&dspi->dma->cmd_rx_complete);
> +	reinit_completion(&dspi->dma->cmd_tx_complete);
> +
> +	dma_async_issue_pending(dma->chan_rx);
> +	dma_async_issue_pending(dma->chan_tx);
> +
> +	time_left = wait_for_completion_timeout(&dspi->dma->cmd_tx_complete,
> +					DMA_COMPLETION_TIMEOUT);
> +	if (time_left == 0) {
> +		dev_err(dev, "DMA tx timeout\n");
> +		dmaengine_terminate_all(dma->chan_tx);
> +		dmaengine_terminate_all(dma->chan_rx);
> +		return -ETIMEDOUT;
> +	}
> +
> +	time_left = wait_for_completion_timeout(&dspi->dma->cmd_rx_complete,
> +					DMA_COMPLETION_TIMEOUT);
> +	if (time_left == 0) {
> +		dev_err(dev, "DMA rx timeout\n");
> +		dmaengine_terminate_all(dma->chan_tx);
> +		dmaengine_terminate_all(dma->chan_rx);
> +		return -ETIMEDOUT;
> +	}
> +
> +	return 0;
> +}
> +
> +static int dspi_dma_xfer(struct fsl_dspi *dspi)
> +{
> +	struct fsl_dspi_dma *dma = dspi->dma;
> +	struct device *dev = &dspi->pdev->dev;
> +	int curr_remaining_bytes;
> +	int ret = 0;
> +
> +	curr_remaining_bytes = dspi->len;
> +	while (curr_remaining_bytes) {
> +		/* Check if current transfer fits the DMA buffer */
> +		dma->curr_xfer_len = curr_remaining_bytes;
> +		if (curr_remaining_bytes > DSPI_DMA_BUFSIZE / DSPI_FIFO_SIZE)
> +			dma->curr_xfer_len = DSPI_DMA_BUFSIZE / DSPI_FIFO_SIZE;
> +
> +		ret = dspi_next_xfer_dma_submit(dspi);
> +		if (ret) {
> +			dev_err(dev, "DMA transfer failed\n");
> +			goto exit;
> +
> +		} else {
> +			curr_remaining_bytes -= dma->curr_xfer_len;
> +			if (curr_remaining_bytes < 0)
> +				curr_remaining_bytes = 0;
> +			dspi->len = curr_remaining_bytes;
> +		}
> +	}
> +
> +exit:
> +	return ret;
> +}
> +
> +static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
> +{
> +	struct fsl_dspi_dma *dma;
> +	struct dma_slave_config cfg;
> +	struct device *dev = &dspi->pdev->dev;
> +	int ret;
> +
> +	dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
> +	if (!dma)
> +		return -ENOMEM;
> +
> +	dma->chan_rx = dma_request_slave_channel(dev, "rx");
> +	if (!dma->chan_rx) {
> +		dev_err(dev, "rx dma channel not available\n");
> +		ret = -ENODEV;
> +		return ret;
> +	}
> +
> +	dma->chan_tx = dma_request_slave_channel(dev, "tx");
> +	if (!dma->chan_tx) {
> +		dev_err(dev, "tx dma channel not available\n");
> +		ret = -ENODEV;
> +		goto err_tx_channel;
> +	}
> +
> +	dma->tx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE,
> +					&dma->tx_dma_phys, GFP_KERNEL);
> +	if (!dma->tx_dma_buf) {
> +		ret = -ENOMEM;
> +		goto err_tx_dma_buf;
> +	}
> +
> +	dma->rx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE,
> +					&dma->rx_dma_phys, GFP_KERNEL);
> +	if (!dma->rx_dma_buf) {
> +		ret = -ENOMEM;
> +		goto err_rx_dma_buf;
> +	}
> +
> +	cfg.src_addr = phy_addr + SPI_POPR;
> +	cfg.dst_addr = phy_addr + SPI_PUSHR;
> +	cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +	cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +	cfg.src_maxburst = 1;
> +	cfg.dst_maxburst = 1;
> +
> +	cfg.direction = DMA_DEV_TO_MEM;
> +	ret = dmaengine_slave_config(dma->chan_rx, &cfg);
> +	if (ret) {
> +		dev_err(dev, "can't configure rx dma channel\n");
> +		ret = -EINVAL;
> +		goto err_slave_config;
> +	}
> +
> +	cfg.direction = DMA_MEM_TO_DEV;
> +	ret = dmaengine_slave_config(dma->chan_tx, &cfg);
> +	if (ret) {
> +		dev_err(dev, "can't configure tx dma channel\n");
> +		ret = -EINVAL;
> +		goto err_slave_config;
> +	}
> +
> +	dspi->dma = dma;
> +	dspi->devtype_data->trans_mode = DSPI_DMA_MODE;
> +	init_completion(&dma->cmd_tx_complete);
> +	init_completion(&dma->cmd_rx_complete);
> +
> +	return 0;
> +
> +err_slave_config:
> +	devm_kfree(dev, dma->rx_dma_buf);
> +err_rx_dma_buf:
> +	devm_kfree(dev, dma->tx_dma_buf);
> +err_tx_dma_buf:
> +	dma_release_channel(dma->chan_tx);
> +err_tx_channel:
> +	dma_release_channel(dma->chan_rx);
> +
> +	devm_kfree(dev, dma);
> +	dspi->dma = NULL;
> +
> +	return ret;
> +}
> +
> +static void dspi_release_dma(struct fsl_dspi *dspi)
> +{
> +	struct fsl_dspi_dma *dma = dspi->dma;
> +	struct device *dev = &dspi->pdev->dev;
> +
> +	if (dma) {
> +		if (dma->chan_tx) {
> +			dma_unmap_single(dev, dma->tx_dma_phys,
> +					DSPI_DMA_BUFSIZE, DMA_TO_DEVICE);
> +			dma_release_channel(dma->chan_tx);
> +		}
> +
> +		if (dma->chan_rx) {
> +			dma_unmap_single(dev, dma->rx_dma_phys,
> +					DSPI_DMA_BUFSIZE, DMA_FROM_DEVICE);
> +			dma_release_channel(dma->chan_rx);
> +		}
> +	}
> +}
> +
>  static int dspi_transfer_one_message(struct spi_master *master,
>  		struct spi_message *message)
>  {
> @@ -424,6 +705,12 @@ static int dspi_transfer_one_message(struct spi_master *master,
>  			regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_TCFQE);
>  			dspi_tcfq_write(dspi);
>  			break;
> +		case DSPI_DMA_MODE:
> +			regmap_write(dspi->regmap, SPI_RSER,
> +				SPI_RSER_TFFFE | SPI_RSER_TFFFD |
> +				SPI_RSER_RFDFE | SPI_RSER_RFDFD);
> +			status = dspi_dma_xfer(dspi);
> +			goto out;
>  		default:
>  			dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
>  				trans_mode);
> @@ -730,6 +1017,9 @@ static int dspi_probe(struct platform_device *pdev)
>  	}
>  	clk_prepare_enable(dspi->clk);
>  
> +	if (dspi_request_dma(dspi, res->start))
> +		dev_warn(&pdev->dev, "can't get dma channels\n");
> +
>  	master->max_speed_hz =
>  		clk_get_rate(dspi->clk) / dspi->devtype_data->max_clock_factor;
>  
> @@ -758,6 +1048,7 @@ static int dspi_remove(struct platform_device *pdev)
>  	struct fsl_dspi *dspi = spi_master_get_devdata(master);
>  
>  	/* Disconnect from the SPI framework */
> +	dspi_release_dma(dspi);
>  	clk_disable_unprepare(dspi->clk);
>  	spi_unregister_master(dspi->master);
>  	spi_master_put(dspi->master);
> -- 
> 2.10.0
> 

[PATCH v2] spi: spi-fsl-dspi: Add DMA support for Vybrid

[Mark Brown]

On Mon, Oct 17, 2016 at 11:53:08AM +0530, maitysanchayan at gmail.com wrote:
> Hello,
> 
> Ping?

Please don't send content free pings and please allow a reasonable time
for review.  People get busy, go on holiday, attend conferences and so 
on so unless there is some reason for urgency (like critical bug fixes)
please allow at least a couple of weeks for review.  If there have been
review comments then people may be waiting for those to be addressed.
Sending content free pings just adds to the mail volume (if they are
seen at all) and if something has gone wrong you'll have to resend the
patches anyway.

Please don't top post, reply in line with needed context.  This allows
readers to readily follow the flow of conversation and understand what
you are talking about and also helps ensure that everything in the
discussion is being addressed.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 455 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161028/2a48a59a/attachment.sig>

[PATCH v1 1/2] ARM: dts: vfxxx: Enable DMA for DSPI on Vybrid

[Stefan Agner]

On 2016-10-03 05:50, Sanchayan Maity wrote:
> Enable DMA for DSPI on Vybrid.

Hm, we have that in 4.4 already, is that meant for 4.1?

> 
> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
> ---
>  arch/arm/boot/dts/vf-colibri.dtsi | 4 ++++
>  arch/arm/boot/dts/vfxxx.dtsi      | 6 ++++++
>  2 files changed, 10 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/vf-colibri.dtsi
> b/arch/arm/boot/dts/vf-colibri.dtsi
> index b741709..21bfef9 100644
> --- a/arch/arm/boot/dts/vf-colibri.dtsi
> +++ b/arch/arm/boot/dts/vf-colibri.dtsi
> @@ -108,6 +108,10 @@
>  	status = "okay";
>  };
>  
> +&edma1 {
> +	status = "okay";
> +};
> +
>  &esdhc1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_esdhc1>;
> diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
> index 2c13ec6..eac4213 100644
> --- a/arch/arm/boot/dts/vfxxx.dtsi
> +++ b/arch/arm/boot/dts/vfxxx.dtsi
> @@ -194,6 +194,9 @@
>  				clocks = <&clks VF610_CLK_DSPI0>;
>  				clock-names = "dspi";
>  				spi-num-chipselects = <6>;
> +				dmas = <&edma1 1 12>,
> +					<&edma1 1 13>;
> +				dma-names = "rx", "tx";
>  				status = "disabled";
>  			};
>  
> @@ -206,6 +209,9 @@
>  				clocks = <&clks VF610_CLK_DSPI1>;
>  				clock-names = "dspi";
>  				spi-num-chipselects = <4>;
> +				dmas = <&edma1 1 14>,
> +					<&edma1 1 15>;
> +				dma-names = "rx", "tx";
>  				status = "disabled";
>  			};

[PATCH v1 1/2] ARM: dts: vfxxx: Enable DMA for DSPI on Vybrid

[maitysanchayan at gmail.com]

Hello Stefan,

On 16-10-03 11:05:59, Stefan Agner wrote:
> On 2016-10-03 05:50, Sanchayan Maity wrote:
> > Enable DMA for DSPI on Vybrid.
> 
> Hm, we have that in 4.4 already, is that meant for 4.1?

Sorry?! I send this out for mainline and the patch series is based
on top of shawn's for-next branch. Did not intend it for our downstream
4.1.

Thanks.

Regards,
Stefan.

> 
> > 
> > Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
> > ---
> >  arch/arm/boot/dts/vf-colibri.dtsi | 4 ++++
> >  arch/arm/boot/dts/vfxxx.dtsi      | 6 ++++++
> >  2 files changed, 10 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/vf-colibri.dtsi
> > b/arch/arm/boot/dts/vf-colibri.dtsi
> > index b741709..21bfef9 100644
> > --- a/arch/arm/boot/dts/vf-colibri.dtsi
> > +++ b/arch/arm/boot/dts/vf-colibri.dtsi
> > @@ -108,6 +108,10 @@
> >  	status = "okay";
> >  };
> >  
> > +&edma1 {
> > +	status = "okay";
> > +};
> > +
> >  &esdhc1 {
> >  	pinctrl-names = "default";
> >  	pinctrl-0 = <&pinctrl_esdhc1>;
> > diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
> > index 2c13ec6..eac4213 100644
> > --- a/arch/arm/boot/dts/vfxxx.dtsi
> > +++ b/arch/arm/boot/dts/vfxxx.dtsi
> > @@ -194,6 +194,9 @@
> >  				clocks = <&clks VF610_CLK_DSPI0>;
> >  				clock-names = "dspi";
> >  				spi-num-chipselects = <6>;
> > +				dmas = <&edma1 1 12>,
> > +					<&edma1 1 13>;
> > +				dma-names = "rx", "tx";
> >  				status = "disabled";
> >  			};
> >  
> > @@ -206,6 +209,9 @@
> >  				clocks = <&clks VF610_CLK_DSPI1>;
> >  				clock-names = "dspi";
> >  				spi-num-chipselects = <4>;
> > +				dmas = <&edma1 1 14>,
> > +					<&edma1 1 15>;
> > +				dma-names = "rx", "tx";
> >  				status = "disabled";
> >  			};

[PATCH v1 1/2] ARM: dts: vfxxx: Enable DMA for DSPI on Vybrid

[Shawn Guo]

On Mon, Oct 03, 2016 at 06:20:37PM +0530, Sanchayan Maity wrote:
> Enable DMA for DSPI on Vybrid.
> 
> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>

This is a hardware description which looks correct, regardless of the
DSPI driver readiness.  So I applied it.

Shawn