[PATCH 0/2] ARM: davinci: initial infrastructure for LCDC

[karl.beldan@gmail.com (Karl Beldan)]

On Wed, Oct 05, 2016 at 03:05:30PM +0200, Bartosz Golaszewski wrote:
> After discussing the matter with Laurent Pinchart it turned out that
> using ti,tilcdc,panel was wrong and we should go with the new
> simple-vga-dac driver proposed by Maxime Ripard and currently being
> reviewed.
> 
> The da850-lcdk board on which I'm working has a THS8135 video DAC for
> which the new driver seems to be best suited and we'll be able to
> query the connected display for supported modes instead of hardcoding
> them in the dt as is needed for the panel driver.
> 

I meant to point to these new changes but then it slipped my mind, it is
clearly the way to go.

Regards, 
Karl


> In the meantime I'm posting two patches based on Karl Beldan's
> previous work that can already be merged.
> 
> The first one adds OF_DEV_AUXDATA entry to da8xx-dt.c. I changed the
> compatible string to the new one we're introducing in the tilcdc
> driver.
> 
> The second adds the lcd pins and the display node to da850.dtsi. As
> suggested by Sekhar: I moved the pins node, which was previously in
> da850-lcdk.dts, to da850.dtsi. I also squashed Karl's two patches and
> removed the panel node.
> 
> Tested on a da850-lcdk with an LCD display connected over VGA with
> two patches already posted to the drm mailing list:
> 
>   drm: tilcdc: add a da850-specific compatible string
>   drm: tilcdc: add a workaround for failed clk_set_rate()
> 
> and some additional work-in-progress/hacks on top of that.
> 
> Karl Beldan (2):
>   ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for lcdc
>   ARM: dts: da850: add a node for the LCD controller
> 
>  arch/arm/boot/dts/da850.dtsi     | 29 +++++++++++++++++++++++++++++
>  arch/arm/mach-davinci/da8xx-dt.c |  1 +
>  2 files changed, 30 insertions(+)
> 
> -- 
> 2.9.3
>