From mboxrd@z Thu Jan 1 00:00:00 1970 From: mugunthanvnm@ti.com (Mugunthan V N) Date: Thu, 6 Oct 2016 10:43:54 +0530 Subject: [PATCH v3 3/4] ARM: dts: dra72-evm-revc: add phy impedance settings In-Reply-To: <20161006051355.15947-1-mugunthanvnm@ti.com> References: <20161006051355.15947-1-mugunthanvnm@ti.com> Message-ID: <20161006051355.15947-4-mugunthanvnm@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The default impedance settings of the phy is not the optimal value, due to this the second ethernet is not working. Fix it with correct values which makes the second ethernet port to work. Signed-off-by: Mugunthan V N --- arch/arm/boot/dts/dra72-evm-revc.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index f9cfd3b..aafb594 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -62,6 +62,7 @@ ti,rx-internal-delay = ; ti,tx-internal-delay = ; ti,fifo-depth = ; + ti,min-output-impedance; }; dp83867_1: ethernet-phy at 3 { @@ -69,5 +70,6 @@ ti,rx-internal-delay = ; ti,tx-internal-delay = ; ti,fifo-depth = ; + ti,min-output-imepdance; }; }; -- 2.10.0.372.g6fe1b14