From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Tue, 11 Oct 2016 12:26:31 +0200 Subject: [PATCH v7 0/3] drm: Add Support for Passive RGB to VGA bridges In-Reply-To: References: Message-ID: <20161011102631.GU3462@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Oct 10, 2016 at 11:05:40AM +0200, Maxime Ripard wrote: > Hi, > > This serie is about adding support for the RGB to VGA bridge found in > the A13-Olinuxino and the CHIP VGA adapter. > > Both these boards rely on an entirely passive bridge made out of > resitor ladders that do not require any initialisation. The only thing > needed is to get the timings from the screen if available (and if not, > fall back on XGA standards), set up the display pipeline to output on > the RGB bus with the proper timings, and you're done. > > This serie also fixes a bunch of bugs uncovered when trying to > increase the resolution, and hence the pixel clock, of our > pipeline. It also fixes a few bugs in the DRM driver itself that went > unnoticed before. > > Let me know what you think, > Maxime Queued all three for 4.10. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: