[PATCH 1/5] dt-bindings: add vendor prefix for ILI Technology Corp

[PATCH 1/5] dt-bindings: add vendor prefix for ILI Technology Corp

[Icenowy Zheng]

ILI Technology Corp (a.k.a Ilitek, http://www.ilitek.com/index-e.asp ) is a
company that produces LCD driver ICs and touch screen controller ICs.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 24c6f65..4d37fdc 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -130,6 +130,7 @@ i2se	I2SE GmbH
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
 ifi	Ingenieurburo Fur Ic-Technologie (I/F/I)
+ilitek	ILI Technologies Corp.
 img	Imagination Technologies Ltd.
 infineon Infineon Technologies
 inforce	Inforce Computing
-- 
2.10.1

[PATCH 2/5] dt-bindings: add binding for Ilitek ili2139 touchscreen IC

[Icenowy Zheng]

Ilitek ili2139 is a touchscreen IC used in several tablet products, for
example, Colorfly E708 Q1.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
 .../bindings/input/touchscreen/ilitek_ili2139.txt     | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ilitek_ili2139.txt

diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ili2139.txt b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ili2139.txt
new file mode 100644
index 0000000..72d2352
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ili2139.txt
@@ -0,0 +1,19 @@
+* Ilitek ili2139 touchscreen controller
+
+Required properties:
+- compatible		  : "ilitek,ili2139"
+- reg			  : I2C slave address of the chip (0x41)
+- interrupt-parent	  : a phandle pointing to the interrupt controller
+			    serving the interrupt for this chip
+- interrupts		  : interrupt specification for the ili2139 interrupt
+
+Example:
+
+i2c at 00000000 {
+	ili2139: touchscreen at 41 {
+		compatible = "ilitek,ili2139"
+		reg = <0x41>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
-- 
2.10.1

[PATCH 3/5] Input: add driver for Ilitek ili2139 touch IC

[Icenowy Zheng]

This driver adds support for Ilitek ili2139 touch IC, which is used in
several Colorfly tablets (for example, Colorfly E708 Q1, which is an
Allwinner A31s tablet with mainline kernel support).

Theortically it may support more Ilitek touch ICs, however, only ili2139
is used in any mainlined device.

It supports device tree enumeration, with screen resolution and axis
quirks configurable.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
 drivers/input/touchscreen/Kconfig   |  14 ++
 drivers/input/touchscreen/Makefile  |   1 +
 drivers/input/touchscreen/ili2139.c | 320 ++++++++++++++++++++++++++++++++++++
 3 files changed, 335 insertions(+)
 create mode 100644 drivers/input/touchscreen/ili2139.c

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 5079813..bb4d9d2 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -348,6 +348,20 @@ config TOUCHSCREEN_ILI210X
 	  To compile this driver as a module, choose M here: the
 	  module will be called ili210x.
 
+config TOUCHSCREEN_ILI2139
+	tristate "Ilitek ILI2139 based touchscreen"
+	depends on I2C
+	depends on OF
+	help
+	  Say Y here if you have a ILI2139 based touchscreen
+	  controller. Such kind of chipsets can be found in several
+	  Colorfly tablets.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here; the
+	  module will be called ili2139.
+
 config TOUCHSCREEN_IPROC
 	tristate "IPROC touch panel driver support"
 	depends on ARCH_BCM_IPROC || COMPILE_TEST
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 81b8645..930b5e2 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL)	+= egalax_ts_serial.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
 obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix.o
 obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
+obj-$(CONFIG_TOUCHSCREEN_ILI2139)	+= ili2139.o
 obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC)	+= imx6ul_tsc.o
 obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
 obj-$(CONFIG_TOUCHSCREEN_INTEL_MID)	+= intel-mid-touch.o
diff --git a/drivers/input/touchscreen/ili2139.c b/drivers/input/touchscreen/ili2139.c
new file mode 100644
index 0000000..65c2dea
--- /dev/null
+++ b/drivers/input/touchscreen/ili2139.c
@@ -0,0 +1,320 @@
+/* -------------------------------------------------------------------------
+ * Copyright (C) 2016, Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Derived from:
+ *  ili210x.c
+ *  Copyright (C) Olivier Sobrie <olivier@sobrie.be>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ * -------------------------------------------------------------------------
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+
+#define DEFAULT_POLL_PERIOD	20
+
+#define MAX_TOUCHES		10
+#define COMPATIBLE_TOUCHES	2
+
+/* Touchscreen commands */
+#define REG_TOUCHDATA		0x10
+#define REG_TOUCHSUBDATA	0x11
+#define REG_PANEL_INFO		0x20
+#define REG_FIRMWARE_VERSION	0x40
+#define REG_PROTO_VERSION	0x42
+
+#define SUBDATA_STATUS_TOUCH_POINT	0x80
+#define SUBDATA_STATUS_RELEASE_POINT	0x00
+
+struct finger {
+	u8 x_low;
+	u8 x_high;
+	u8 y_low;
+	u8 y_high;
+} __packed;
+
+struct touchdata {
+	u8 length;
+	struct finger finger[COMPATIBLE_TOUCHES];
+} __packed;
+
+struct touch_subdata {
+	u8 status;
+	struct finger finger;
+} __packed;
+
+struct panel_info {
+	struct finger finger_max;
+	u8 xchannel_num;
+	u8 ychannel_num;
+} __packed;
+
+struct firmware_version {
+	u8 id;
+	u8 major;
+	u8 minor;
+} __packed;
+
+struct ili2139 {
+	struct i2c_client *client;
+	struct input_dev *input;
+	unsigned int poll_period;
+	struct delayed_work dwork;
+	struct touchscreen_properties prop;
+	int slots[MAX_TOUCHES];
+	int ids[MAX_TOUCHES];
+	struct input_mt_pos pos[MAX_TOUCHES];
+};
+
+static int ili2139_read_reg(struct i2c_client *client, u8 reg, void *buf,
+			    size_t len)
+{
+	struct i2c_msg msg[2] = {
+		{
+			.addr	= client->addr,
+			.flags	= 0,
+			.len	= 1,
+			.buf	= &reg,
+		},
+		{
+			.addr	= client->addr,
+			.flags	= I2C_M_RD,
+			.len	= len,
+			.buf	= buf,
+		}
+	};
+
+	if (i2c_transfer(client->adapter, msg, 2) != 2) {
+		dev_err(&client->dev, "i2c transfer failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void ili2139_work(struct work_struct *work)
+{
+	int id;
+	struct ili2139 *priv = container_of(work, struct ili2139,
+					    dwork.work);
+	struct i2c_client *client = priv->client;
+	struct touchdata touchdata;
+	struct touch_subdata subdata;
+	int error;
+
+	error = ili2139_read_reg(client, REG_TOUCHDATA,
+				 &touchdata, sizeof(touchdata));
+	if (error) {
+		dev_err(&client->dev,
+			"Unable to get touchdata, err = %d\n", error);
+		return;
+	}
+
+	for (id = 0; id < touchdata.length; id++) {
+		error = ili2139_read_reg(client, REG_TOUCHSUBDATA, &subdata,
+					 sizeof(subdata));
+		if (error) {
+			dev_err(&client->dev,
+				"Unable to get touch subdata, err = %d\n",
+				error);
+			return;
+		}
+
+		priv->ids[id] = subdata.status & 0x3F;
+
+		/* The sequence changed in the v2 subdata protocol. */
+		touchscreen_set_mt_pos(&priv->pos[id], &priv->prop,
+			(subdata.finger.x_high | (subdata.finger.x_low << 8)),
+			(subdata.finger.y_high | (subdata.finger.y_low << 8)));
+	}
+
+	input_mt_assign_slots(priv->input, priv->slots, priv->pos,
+			      touchdata.length, 0);
+
+	for (id = 0; id < touchdata.length; id++) {
+		input_mt_slot(priv->input, priv->slots[id]);
+		input_mt_report_slot_state(priv->input, MT_TOOL_FINGER,
+					   subdata.status &
+					   SUBDATA_STATUS_TOUCH_POINT);
+		input_report_abs(priv->input, ABS_MT_POSITION_X,
+				 priv->pos[id].x);
+		input_report_abs(priv->input, ABS_MT_POSITION_Y,
+				 priv->pos[id].y);
+	}
+
+	input_mt_sync_frame(priv->input);
+	input_sync(priv->input);
+
+	schedule_delayed_work(&priv->dwork,
+			      msecs_to_jiffies(priv->poll_period));
+}
+
+static irqreturn_t ili2139_irq(int irq, void *irq_data)
+{
+	struct ili2139 *priv = irq_data;
+
+	schedule_delayed_work(&priv->dwork, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int ili2139_i2c_probe(struct i2c_client *client,
+				       const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct ili2139 *priv;
+	struct input_dev *input;
+	struct panel_info panel;
+	struct firmware_version firmware;
+	int xmax, ymax;
+	int error;
+
+	dev_dbg(dev, "Probing for ILI2139 I2C Touschreen driver");
+
+	if (client->irq <= 0) {
+		dev_err(dev, "No IRQ!\n");
+		return -ENODEV;
+	}
+
+	/* Get firmware version */
+	error = ili2139_read_reg(client, REG_FIRMWARE_VERSION,
+				 &firmware, sizeof(firmware));
+	if (error) {
+		dev_err(dev, "Failed to get firmware version, err: %d\n",
+			error);
+		return error;
+	}
+
+	/* get panel info */
+	error = ili2139_read_reg(client, REG_PANEL_INFO, &panel, sizeof(panel));
+	if (error) {
+		dev_err(dev, "Failed to get panel information, err: %d\n",
+			error);
+		return error;
+	}
+
+	xmax = panel.finger_max.x_low | (panel.finger_max.x_high << 8);
+	ymax = panel.finger_max.y_low | (panel.finger_max.y_high << 8);
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	input = devm_input_allocate_device(dev);
+	if (!priv || !input)
+		return -ENOMEM;
+
+	priv->client = client;
+	priv->input = input;
+	priv->poll_period = DEFAULT_POLL_PERIOD;
+	INIT_DELAYED_WORK(&priv->dwork, ili2139_work);
+
+	/* Setup input device */
+	input->name = "ILI2139 Touchscreen";
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = dev;
+
+	__set_bit(EV_SYN, input->evbit);
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(EV_ABS, input->evbit);
+
+	/* Multi touch */
+	input_mt_init_slots(input, MAX_TOUCHES, INPUT_MT_DIRECT |
+			    INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK);
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0, xmax, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ymax, 0, 0);
+
+	touchscreen_parse_properties(input, true, &priv->prop);
+
+	input_set_drvdata(input, priv);
+	i2c_set_clientdata(client, priv);
+
+	error = devm_request_irq(dev, client->irq, ili2139_irq,
+				 IRQF_TRIGGER_FALLING, client->name, priv);
+	if (error) {
+		dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n",
+			error);
+		return error;
+	}
+
+	error = input_register_device(priv->input);
+	if (error) {
+		dev_err(dev, "Cannot register input device, err: %d\n", error);
+		return error;
+	}
+
+	device_init_wakeup(&client->dev, 1);
+
+	dev_dbg(dev,
+		"ILI2139 initialized (IRQ: %d), firmware version %d.%d.%d",
+		client->irq, firmware.id, firmware.major, firmware.minor);
+
+	return 0;
+}
+
+static int ili2139_i2c_remove(struct i2c_client *client)
+{
+	struct ili2139 *priv = i2c_get_clientdata(client);
+
+	cancel_delayed_work_sync(&priv->dwork);
+
+	return 0;
+}
+
+static int __maybe_unused ili2139_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static int __maybe_unused ili2139_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ili2139_i2c_pm,
+			 ili2139_i2c_suspend, ili2139_i2c_resume);
+
+static const struct i2c_device_id ili2139_i2c_id[] = {
+	{ "ili2139", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ili2139_i2c_id);
+
+static struct i2c_driver ili2139_ts_driver = {
+	.driver = {
+		.name = "ili2139_i2c",
+		.pm = &ili2139_i2c_pm,
+	},
+	.id_table = ili2139_i2c_id,
+	.probe = ili2139_i2c_probe,
+	.remove = ili2139_i2c_remove,
+};
+
+module_i2c_driver(ili2139_ts_driver);
+
+MODULE_AUTHOR("Olivier Sobrie <olivier@sobrie.be>");
+MODULE_DESCRIPTION("ILI2139 I2C Touchscreen Driver");
+MODULE_LICENSE("GPL");
-- 
2.10.1

[linux-sunxi] [PATCH 3/5] Input: add driver for Ilitek ili2139 touch IC

[Hans de Goede]

Hi,

On 10/11/2016 02:33 AM, Icenowy Zheng wrote:
> This driver adds support for Ilitek ili2139 touch IC, which is used in
> several Colorfly tablets (for example, Colorfly E708 Q1, which is an
> Allwinner A31s tablet with mainline kernel support).
>
> Theortically it may support more Ilitek touch ICs, however, only ili2139
> is used in any mainlined device.
>
> It supports device tree enumeration, with screen resolution and axis
> quirks configurable.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
>  drivers/input/touchscreen/Kconfig   |  14 ++
>  drivers/input/touchscreen/Makefile  |   1 +
>  drivers/input/touchscreen/ili2139.c | 320 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 335 insertions(+)
>  create mode 100644 drivers/input/touchscreen/ili2139.c
>
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index 5079813..bb4d9d2 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -348,6 +348,20 @@ config TOUCHSCREEN_ILI210X
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called ili210x.
>
> +config TOUCHSCREEN_ILI2139
> +	tristate "Ilitek ILI2139 based touchscreen"
> +	depends on I2C
> +	depends on OF
> +	help
> +	  Say Y here if you have a ILI2139 based touchscreen
> +	  controller. Such kind of chipsets can be found in several
> +	  Colorfly tablets.
> +
> +	  If unsure, say N.
> +
> +	  To compile this driver as a module, choose M here; the
> +	  module will be called ili2139.
> +
>  config TOUCHSCREEN_IPROC
>  	tristate "IPROC touch panel driver support"
>  	depends on ARCH_BCM_IPROC || COMPILE_TEST
> diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> index 81b8645..930b5e2 100644
> --- a/drivers/input/touchscreen/Makefile
> +++ b/drivers/input/touchscreen/Makefile
> @@ -40,6 +40,7 @@ obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL)	+= egalax_ts_serial.o
>  obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
>  obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix.o
>  obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
> +obj-$(CONFIG_TOUCHSCREEN_ILI2139)	+= ili2139.o
>  obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC)	+= imx6ul_tsc.o
>  obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
>  obj-$(CONFIG_TOUCHSCREEN_INTEL_MID)	+= intel-mid-touch.o
> diff --git a/drivers/input/touchscreen/ili2139.c b/drivers/input/touchscreen/ili2139.c
> new file mode 100644
> index 0000000..65c2dea
> --- /dev/null
> +++ b/drivers/input/touchscreen/ili2139.c
> @@ -0,0 +1,320 @@
> +/* -------------------------------------------------------------------------
> + * Copyright (C) 2016, Icenowy Zheng <icenowy@aosc.xyz>
> + *
> + * Derived from:
> + *  ili210x.c
> + *  Copyright (C) Olivier Sobrie <olivier@sobrie.be>
> + *
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License as published by
> + *  the Free Software Foundation; either version 2 of the License, or
> + *  (at your option) any later version.
> + *
> + *  This program is distributed in the hope that it will be useful,
> + *  but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *  GNU General Public License for more details.
> + * -------------------------------------------------------------------------
> + */
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/slab.h>
> +#include <linux/input.h>
> +#include <linux/input/mt.h>
> +#include <linux/input/touchscreen.h>
> +#include <linux/delay.h>
> +#include <linux/workqueue.h>
> +
> +#define DEFAULT_POLL_PERIOD	20
> +
> +#define MAX_TOUCHES		10
> +#define COMPATIBLE_TOUCHES	2
> +
> +/* Touchscreen commands */
> +#define REG_TOUCHDATA		0x10
> +#define REG_TOUCHSUBDATA	0x11
> +#define REG_PANEL_INFO		0x20
> +#define REG_FIRMWARE_VERSION	0x40
> +#define REG_PROTO_VERSION	0x42
> +
> +#define SUBDATA_STATUS_TOUCH_POINT	0x80
> +#define SUBDATA_STATUS_RELEASE_POINT	0x00
> +
> +struct finger {
> +	u8 x_low;
> +	u8 x_high;
> +	u8 y_low;
> +	u8 y_high;
> +} __packed;
> +
> +struct touchdata {
> +	u8 length;
> +	struct finger finger[COMPATIBLE_TOUCHES];
> +} __packed;
> +
> +struct touch_subdata {
> +	u8 status;
> +	struct finger finger;
> +} __packed;
> +
> +struct panel_info {
> +	struct finger finger_max;
> +	u8 xchannel_num;
> +	u8 ychannel_num;
> +} __packed;
> +
> +struct firmware_version {
> +	u8 id;
> +	u8 major;
> +	u8 minor;
> +} __packed;
> +
> +struct ili2139 {
> +	struct i2c_client *client;
> +	struct input_dev *input;
> +	unsigned int poll_period;
> +	struct delayed_work dwork;
> +	struct touchscreen_properties prop;
> +	int slots[MAX_TOUCHES];
> +	int ids[MAX_TOUCHES];
> +	struct input_mt_pos pos[MAX_TOUCHES];
> +};
> +
> +static int ili2139_read_reg(struct i2c_client *client, u8 reg, void *buf,
> +			    size_t len)
> +{
> +	struct i2c_msg msg[2] = {
> +		{
> +			.addr	= client->addr,
> +			.flags	= 0,
> +			.len	= 1,
> +			.buf	= &reg,
> +		},
> +		{
> +			.addr	= client->addr,
> +			.flags	= I2C_M_RD,
> +			.len	= len,
> +			.buf	= buf,
> +		}
> +	};
> +
> +	if (i2c_transfer(client->adapter, msg, 2) != 2) {
> +		dev_err(&client->dev, "i2c transfer failed\n");
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}

This just i2c_smbus_read_i2c_block_data, please use that instead.

> +static void ili2139_work(struct work_struct *work)
> +{
> +	int id;
> +	struct ili2139 *priv = container_of(work, struct ili2139,
> +					    dwork.work);
> +	struct i2c_client *client = priv->client;
> +	struct touchdata touchdata;
> +	struct touch_subdata subdata;
> +	int error;
> +
> +	error = ili2139_read_reg(client, REG_TOUCHDATA,
> +				 &touchdata, sizeof(touchdata));
> +	if (error) {
> +		dev_err(&client->dev,
> +			"Unable to get touchdata, err = %d\n", error);
> +		return;
> +	}
> +
> +	for (id = 0; id < touchdata.length; id++) {
> +		error = ili2139_read_reg(client, REG_TOUCHSUBDATA, &subdata,
> +					 sizeof(subdata));
> +		if (error) {
> +			dev_err(&client->dev,
> +				"Unable to get touch subdata, err = %d\n",
> +				error);
> +			return;
> +		}
> +
> +		priv->ids[id] = subdata.status & 0x3F;
> +
> +		/* The sequence changed in the v2 subdata protocol. */
> +		touchscreen_set_mt_pos(&priv->pos[id], &priv->prop,
> +			(subdata.finger.x_high | (subdata.finger.x_low << 8)),
> +			(subdata.finger.y_high | (subdata.finger.y_low << 8)));
> +	}
> +
> +	input_mt_assign_slots(priv->input, priv->slots, priv->pos,
> +			      touchdata.length, 0);
> +
> +	for (id = 0; id < touchdata.length; id++) {
> +		input_mt_slot(priv->input, priv->slots[id]);
> +		input_mt_report_slot_state(priv->input, MT_TOOL_FINGER,
> +					   subdata.status &
> +					   SUBDATA_STATUS_TOUCH_POINT);
> +		input_report_abs(priv->input, ABS_MT_POSITION_X,
> +				 priv->pos[id].x);
> +		input_report_abs(priv->input, ABS_MT_POSITION_Y,
> +				 priv->pos[id].y);
> +	}
> +
> +	input_mt_sync_frame(priv->input);
> +	input_sync(priv->input);
> +
> +	schedule_delayed_work(&priv->dwork,
> +			      msecs_to_jiffies(priv->poll_period));

If the irq is working properly there should be no need for this,
can you try with this schedule call removed ?

> +}
> +
> +static irqreturn_t ili2139_irq(int irq, void *irq_data)
> +{
> +	struct ili2139 *priv = irq_data;
> +
> +	schedule_delayed_work(&priv->dwork, 0);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int ili2139_i2c_probe(struct i2c_client *client,
> +				       const struct i2c_device_id *id)
> +{
> +	struct device *dev = &client->dev;
> +	struct ili2139 *priv;
> +	struct input_dev *input;
> +	struct panel_info panel;
> +	struct firmware_version firmware;
> +	int xmax, ymax;
> +	int error;
> +
> +	dev_dbg(dev, "Probing for ILI2139 I2C Touschreen driver");
> +
> +	if (client->irq <= 0) {
> +		dev_err(dev, "No IRQ!\n");
> +		return -ENODEV;
> +	}
> +
> +	/* Get firmware version */
> +	error = ili2139_read_reg(client, REG_FIRMWARE_VERSION,
> +				 &firmware, sizeof(firmware));
> +	if (error) {
> +		dev_err(dev, "Failed to get firmware version, err: %d\n",
> +			error);
> +		return error;
> +	}
> +
> +	/* get panel info */
> +	error = ili2139_read_reg(client, REG_PANEL_INFO, &panel, sizeof(panel));
> +	if (error) {
> +		dev_err(dev, "Failed to get panel information, err: %d\n",
> +			error);
> +		return error;
> +	}
> +
> +	xmax = panel.finger_max.x_low | (panel.finger_max.x_high << 8);
> +	ymax = panel.finger_max.y_low | (panel.finger_max.y_high << 8);
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	input = devm_input_allocate_device(dev);
> +	if (!priv || !input)
> +		return -ENOMEM;
> +
> +	priv->client = client;
> +	priv->input = input;
> +	priv->poll_period = DEFAULT_POLL_PERIOD;
> +	INIT_DELAYED_WORK(&priv->dwork, ili2139_work);
> +
> +	/* Setup input device */
> +	input->name = "ILI2139 Touchscreen";
> +	input->id.bustype = BUS_I2C;
> +	input->dev.parent = dev;
> +
> +	__set_bit(EV_SYN, input->evbit);
> +	__set_bit(EV_KEY, input->evbit);
> +	__set_bit(EV_ABS, input->evbit);
> +
> +	/* Multi touch */
> +	input_mt_init_slots(input, MAX_TOUCHES, INPUT_MT_DIRECT |
> +			    INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK);
> +	input_set_abs_params(input, ABS_MT_POSITION_X, 0, xmax, 0, 0);
> +	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ymax, 0, 0);
> +
> +	touchscreen_parse_properties(input, true, &priv->prop);
> +
> +	input_set_drvdata(input, priv);
> +	i2c_set_clientdata(client, priv);
> +
> +	error = devm_request_irq(dev, client->irq, ili2139_irq,
> +				 IRQF_TRIGGER_FALLING, client->name, priv);

If things work with the re-scheduleing of the delayed work
from the work removed, then you can use request_threaded_irq here,
pass in ili2139_irq as the threaded handler (and NULL as the non threaded
handler) and do all the i2c reading directly in ili2139_irq without needing
to use any work struct at all.

Regards,

Hans


> +	if (error) {
> +		dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n",
> +			error);
> +		return error;
> +	}
> +
> +	error = input_register_device(priv->input);
> +	if (error) {
> +		dev_err(dev, "Cannot register input device, err: %d\n", error);
> +		return error;
> +	}
> +
> +	device_init_wakeup(&client->dev, 1);
> +
> +	dev_dbg(dev,
> +		"ILI2139 initialized (IRQ: %d), firmware version %d.%d.%d",
> +		client->irq, firmware.id, firmware.major, firmware.minor);
> +
> +	return 0;
> +}
> +
> +static int ili2139_i2c_remove(struct i2c_client *client)
> +{
> +	struct ili2139 *priv = i2c_get_clientdata(client);
> +
> +	cancel_delayed_work_sync(&priv->dwork);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused ili2139_i2c_suspend(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +
> +	if (device_may_wakeup(&client->dev))
> +		enable_irq_wake(client->irq);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused ili2139_i2c_resume(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +
> +	if (device_may_wakeup(&client->dev))
> +		disable_irq_wake(client->irq);
> +
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(ili2139_i2c_pm,
> +			 ili2139_i2c_suspend, ili2139_i2c_resume);
> +
> +static const struct i2c_device_id ili2139_i2c_id[] = {
> +	{ "ili2139", 0 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, ili2139_i2c_id);
> +
> +static struct i2c_driver ili2139_ts_driver = {
> +	.driver = {
> +		.name = "ili2139_i2c",
> +		.pm = &ili2139_i2c_pm,
> +	},
> +	.id_table = ili2139_i2c_id,
> +	.probe = ili2139_i2c_probe,
> +	.remove = ili2139_i2c_remove,
> +};
> +
> +module_i2c_driver(ili2139_ts_driver);
> +
> +MODULE_AUTHOR("Olivier Sobrie <olivier@sobrie.be>");
> +MODULE_DESCRIPTION("ILI2139 I2C Touchscreen Driver");
> +MODULE_LICENSE("GPL");
>

[PATCH 3/5] Input: add driver for Ilitek ili2139 touch IC

[Dmitry Torokhov]

Hi Icenowy,

On Tue, Oct 11, 2016 at 08:33:57AM +0800, Icenowy Zheng wrote:
> This driver adds support for Ilitek ili2139 touch IC, which is used in
> several Colorfly tablets (for example, Colorfly E708 Q1, which is an
> Allwinner A31s tablet with mainline kernel support).
> 
> Theortically it may support more Ilitek touch ICs, however, only ili2139
> is used in any mainlined device.
> 
> It supports device tree enumeration, with screen resolution and axis
> quirks configurable.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>

Please extend ili210x.c instead of adding brand new driver, they look
very similar.

Thanks.

> ---
>  drivers/input/touchscreen/Kconfig   |  14 ++
>  drivers/input/touchscreen/Makefile  |   1 +
>  drivers/input/touchscreen/ili2139.c | 320 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 335 insertions(+)
>  create mode 100644 drivers/input/touchscreen/ili2139.c
> 
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index 5079813..bb4d9d2 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -348,6 +348,20 @@ config TOUCHSCREEN_ILI210X
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called ili210x.
>  
> +config TOUCHSCREEN_ILI2139
> +	tristate "Ilitek ILI2139 based touchscreen"
> +	depends on I2C
> +	depends on OF
> +	help
> +	  Say Y here if you have a ILI2139 based touchscreen
> +	  controller. Such kind of chipsets can be found in several
> +	  Colorfly tablets.
> +
> +	  If unsure, say N.
> +
> +	  To compile this driver as a module, choose M here; the
> +	  module will be called ili2139.
> +
>  config TOUCHSCREEN_IPROC
>  	tristate "IPROC touch panel driver support"
>  	depends on ARCH_BCM_IPROC || COMPILE_TEST
> diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> index 81b8645..930b5e2 100644
> --- a/drivers/input/touchscreen/Makefile
> +++ b/drivers/input/touchscreen/Makefile
> @@ -40,6 +40,7 @@ obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL)	+= egalax_ts_serial.o
>  obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
>  obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix.o
>  obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
> +obj-$(CONFIG_TOUCHSCREEN_ILI2139)	+= ili2139.o
>  obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC)	+= imx6ul_tsc.o
>  obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
>  obj-$(CONFIG_TOUCHSCREEN_INTEL_MID)	+= intel-mid-touch.o
> diff --git a/drivers/input/touchscreen/ili2139.c b/drivers/input/touchscreen/ili2139.c
> new file mode 100644
> index 0000000..65c2dea
> --- /dev/null
> +++ b/drivers/input/touchscreen/ili2139.c
> @@ -0,0 +1,320 @@
> +/* -------------------------------------------------------------------------
> + * Copyright (C) 2016, Icenowy Zheng <icenowy@aosc.xyz>
> + *
> + * Derived from:
> + *  ili210x.c
> + *  Copyright (C) Olivier Sobrie <olivier@sobrie.be>
> + *
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License as published by
> + *  the Free Software Foundation; either version 2 of the License, or
> + *  (at your option) any later version.
> + *
> + *  This program is distributed in the hope that it will be useful,
> + *  but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *  GNU General Public License for more details.
> + * -------------------------------------------------------------------------
> + */
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/slab.h>
> +#include <linux/input.h>
> +#include <linux/input/mt.h>
> +#include <linux/input/touchscreen.h>
> +#include <linux/delay.h>
> +#include <linux/workqueue.h>
> +
> +#define DEFAULT_POLL_PERIOD	20
> +
> +#define MAX_TOUCHES		10
> +#define COMPATIBLE_TOUCHES	2
> +
> +/* Touchscreen commands */
> +#define REG_TOUCHDATA		0x10
> +#define REG_TOUCHSUBDATA	0x11
> +#define REG_PANEL_INFO		0x20
> +#define REG_FIRMWARE_VERSION	0x40
> +#define REG_PROTO_VERSION	0x42
> +
> +#define SUBDATA_STATUS_TOUCH_POINT	0x80
> +#define SUBDATA_STATUS_RELEASE_POINT	0x00
> +
> +struct finger {
> +	u8 x_low;
> +	u8 x_high;
> +	u8 y_low;
> +	u8 y_high;
> +} __packed;
> +
> +struct touchdata {
> +	u8 length;
> +	struct finger finger[COMPATIBLE_TOUCHES];
> +} __packed;
> +
> +struct touch_subdata {
> +	u8 status;
> +	struct finger finger;
> +} __packed;
> +
> +struct panel_info {
> +	struct finger finger_max;
> +	u8 xchannel_num;
> +	u8 ychannel_num;
> +} __packed;
> +
> +struct firmware_version {
> +	u8 id;
> +	u8 major;
> +	u8 minor;
> +} __packed;
> +
> +struct ili2139 {
> +	struct i2c_client *client;
> +	struct input_dev *input;
> +	unsigned int poll_period;
> +	struct delayed_work dwork;
> +	struct touchscreen_properties prop;
> +	int slots[MAX_TOUCHES];
> +	int ids[MAX_TOUCHES];
> +	struct input_mt_pos pos[MAX_TOUCHES];
> +};
> +
> +static int ili2139_read_reg(struct i2c_client *client, u8 reg, void *buf,
> +			    size_t len)
> +{
> +	struct i2c_msg msg[2] = {
> +		{
> +			.addr	= client->addr,
> +			.flags	= 0,
> +			.len	= 1,
> +			.buf	= &reg,
> +		},
> +		{
> +			.addr	= client->addr,
> +			.flags	= I2C_M_RD,
> +			.len	= len,
> +			.buf	= buf,
> +		}
> +	};
> +
> +	if (i2c_transfer(client->adapter, msg, 2) != 2) {
> +		dev_err(&client->dev, "i2c transfer failed\n");
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}
> +
> +static void ili2139_work(struct work_struct *work)
> +{
> +	int id;
> +	struct ili2139 *priv = container_of(work, struct ili2139,
> +					    dwork.work);
> +	struct i2c_client *client = priv->client;
> +	struct touchdata touchdata;
> +	struct touch_subdata subdata;
> +	int error;
> +
> +	error = ili2139_read_reg(client, REG_TOUCHDATA,
> +				 &touchdata, sizeof(touchdata));
> +	if (error) {
> +		dev_err(&client->dev,
> +			"Unable to get touchdata, err = %d\n", error);
> +		return;
> +	}
> +
> +	for (id = 0; id < touchdata.length; id++) {
> +		error = ili2139_read_reg(client, REG_TOUCHSUBDATA, &subdata,
> +					 sizeof(subdata));
> +		if (error) {
> +			dev_err(&client->dev,
> +				"Unable to get touch subdata, err = %d\n",
> +				error);
> +			return;
> +		}
> +
> +		priv->ids[id] = subdata.status & 0x3F;
> +
> +		/* The sequence changed in the v2 subdata protocol. */
> +		touchscreen_set_mt_pos(&priv->pos[id], &priv->prop,
> +			(subdata.finger.x_high | (subdata.finger.x_low << 8)),
> +			(subdata.finger.y_high | (subdata.finger.y_low << 8)));
> +	}
> +
> +	input_mt_assign_slots(priv->input, priv->slots, priv->pos,
> +			      touchdata.length, 0);
> +
> +	for (id = 0; id < touchdata.length; id++) {
> +		input_mt_slot(priv->input, priv->slots[id]);
> +		input_mt_report_slot_state(priv->input, MT_TOOL_FINGER,
> +					   subdata.status &
> +					   SUBDATA_STATUS_TOUCH_POINT);
> +		input_report_abs(priv->input, ABS_MT_POSITION_X,
> +				 priv->pos[id].x);
> +		input_report_abs(priv->input, ABS_MT_POSITION_Y,
> +				 priv->pos[id].y);
> +	}
> +
> +	input_mt_sync_frame(priv->input);
> +	input_sync(priv->input);
> +
> +	schedule_delayed_work(&priv->dwork,
> +			      msecs_to_jiffies(priv->poll_period));
> +}
> +
> +static irqreturn_t ili2139_irq(int irq, void *irq_data)
> +{
> +	struct ili2139 *priv = irq_data;
> +
> +	schedule_delayed_work(&priv->dwork, 0);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int ili2139_i2c_probe(struct i2c_client *client,
> +				       const struct i2c_device_id *id)
> +{
> +	struct device *dev = &client->dev;
> +	struct ili2139 *priv;
> +	struct input_dev *input;
> +	struct panel_info panel;
> +	struct firmware_version firmware;
> +	int xmax, ymax;
> +	int error;
> +
> +	dev_dbg(dev, "Probing for ILI2139 I2C Touschreen driver");
> +
> +	if (client->irq <= 0) {
> +		dev_err(dev, "No IRQ!\n");
> +		return -ENODEV;
> +	}
> +
> +	/* Get firmware version */
> +	error = ili2139_read_reg(client, REG_FIRMWARE_VERSION,
> +				 &firmware, sizeof(firmware));
> +	if (error) {
> +		dev_err(dev, "Failed to get firmware version, err: %d\n",
> +			error);
> +		return error;
> +	}
> +
> +	/* get panel info */
> +	error = ili2139_read_reg(client, REG_PANEL_INFO, &panel, sizeof(panel));
> +	if (error) {
> +		dev_err(dev, "Failed to get panel information, err: %d\n",
> +			error);
> +		return error;
> +	}
> +
> +	xmax = panel.finger_max.x_low | (panel.finger_max.x_high << 8);
> +	ymax = panel.finger_max.y_low | (panel.finger_max.y_high << 8);
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	input = devm_input_allocate_device(dev);
> +	if (!priv || !input)
> +		return -ENOMEM;
> +
> +	priv->client = client;
> +	priv->input = input;
> +	priv->poll_period = DEFAULT_POLL_PERIOD;
> +	INIT_DELAYED_WORK(&priv->dwork, ili2139_work);
> +
> +	/* Setup input device */
> +	input->name = "ILI2139 Touchscreen";
> +	input->id.bustype = BUS_I2C;
> +	input->dev.parent = dev;
> +
> +	__set_bit(EV_SYN, input->evbit);
> +	__set_bit(EV_KEY, input->evbit);
> +	__set_bit(EV_ABS, input->evbit);
> +
> +	/* Multi touch */
> +	input_mt_init_slots(input, MAX_TOUCHES, INPUT_MT_DIRECT |
> +			    INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK);
> +	input_set_abs_params(input, ABS_MT_POSITION_X, 0, xmax, 0, 0);
> +	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ymax, 0, 0);
> +
> +	touchscreen_parse_properties(input, true, &priv->prop);
> +
> +	input_set_drvdata(input, priv);
> +	i2c_set_clientdata(client, priv);
> +
> +	error = devm_request_irq(dev, client->irq, ili2139_irq,
> +				 IRQF_TRIGGER_FALLING, client->name, priv);
> +	if (error) {
> +		dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n",
> +			error);
> +		return error;
> +	}
> +
> +	error = input_register_device(priv->input);
> +	if (error) {
> +		dev_err(dev, "Cannot register input device, err: %d\n", error);
> +		return error;
> +	}
> +
> +	device_init_wakeup(&client->dev, 1);
> +
> +	dev_dbg(dev,
> +		"ILI2139 initialized (IRQ: %d), firmware version %d.%d.%d",
> +		client->irq, firmware.id, firmware.major, firmware.minor);
> +
> +	return 0;
> +}
> +
> +static int ili2139_i2c_remove(struct i2c_client *client)
> +{
> +	struct ili2139 *priv = i2c_get_clientdata(client);
> +
> +	cancel_delayed_work_sync(&priv->dwork);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused ili2139_i2c_suspend(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +
> +	if (device_may_wakeup(&client->dev))
> +		enable_irq_wake(client->irq);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused ili2139_i2c_resume(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +
> +	if (device_may_wakeup(&client->dev))
> +		disable_irq_wake(client->irq);
> +
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(ili2139_i2c_pm,
> +			 ili2139_i2c_suspend, ili2139_i2c_resume);
> +
> +static const struct i2c_device_id ili2139_i2c_id[] = {
> +	{ "ili2139", 0 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, ili2139_i2c_id);
> +
> +static struct i2c_driver ili2139_ts_driver = {
> +	.driver = {
> +		.name = "ili2139_i2c",
> +		.pm = &ili2139_i2c_pm,
> +	},
> +	.id_table = ili2139_i2c_id,
> +	.probe = ili2139_i2c_probe,
> +	.remove = ili2139_i2c_remove,
> +};
> +
> +module_i2c_driver(ili2139_ts_driver);
> +
> +MODULE_AUTHOR("Olivier Sobrie <olivier@sobrie.be>");
> +MODULE_DESCRIPTION("ILI2139 I2C Touchscreen Driver");
> +MODULE_LICENSE("GPL");
> -- 
> 2.10.1
> 

-- 
Dmitry

[PATCH 3/5] Input: add driver for Ilitek ili2139 touch IC

[Icenowy Zheng]

12.10.2016, 01:40, "Dmitry Torokhov" <dmitry.torokhov@gmail.com>:
> Hi Icenowy,
>
> On Tue, Oct 11, 2016 at 08:33:57AM +0800, Icenowy Zheng wrote:
>> ?This driver adds support for Ilitek ili2139 touch IC, which is used in
>> ?several Colorfly tablets (for example, Colorfly E708 Q1, which is an
>> ?Allwinner A31s tablet with mainline kernel support).
>>
>> ?Theortically it may support more Ilitek touch ICs, however, only ili2139
>> ?is used in any mainlined device.
>>
>> ?It supports device tree enumeration, with screen resolution and axis
>> ?quirks configurable.
>>
>> ?Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
>
> Please extend ili210x.c instead of adding brand new driver, they look
> very similar.
>
> Thanks.

The driver is too old, lack of maintaince and needs some platform data hacks.
(At least makes it not capable to be used on current ARM devices, as they're
described with device tree)

Maybe I will rename the new driver modified by me to ili210x, add support for
the old protocol (but I have no chips to test it), and drop the old ili210x.
(This driver is capable of dt probing, and uses devm_ functions)

>
>> ?---
>> ??drivers/input/touchscreen/Kconfig | 14 ++
>> ??drivers/input/touchscreen/Makefile | 1 +
>> ??drivers/input/touchscreen/ili2139.c | 320 ++++++++++++++++++++++++++++++++++++
>> ??3 files changed, 335 insertions(+)
>> ??create mode 100644 drivers/input/touchscreen/ili2139.c
>>
>> ?diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
>> ?index 5079813..bb4d9d2 100644
>> ?--- a/drivers/input/touchscreen/Kconfig
>> ?+++ b/drivers/input/touchscreen/Kconfig
>> ?@@ -348,6 +348,20 @@ config TOUCHSCREEN_ILI210X
>> ????????????To compile this driver as a module, choose M here: the
>> ????????????module will be called ili210x.
>>
>> ?+config TOUCHSCREEN_ILI2139
>> ?+ tristate "Ilitek ILI2139 based touchscreen"
>> ?+ depends on I2C
>> ?+ depends on OF
>> ?+ help
>> ?+ Say Y here if you have a ILI2139 based touchscreen
>> ?+ controller. Such kind of chipsets can be found in several
>> ?+ Colorfly tablets.
>> ?+
>> ?+ If unsure, say N.
>> ?+
>> ?+ To compile this driver as a module, choose M here; the
>> ?+ module will be called ili2139.
>> ?+
>> ??config TOUCHSCREEN_IPROC
>> ??????????tristate "IPROC touch panel driver support"
>> ??????????depends on ARCH_BCM_IPROC || COMPILE_TEST
>> ?diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
>> ?index 81b8645..930b5e2 100644
>> ?--- a/drivers/input/touchscreen/Makefile
>> ?+++ b/drivers/input/touchscreen/Makefile
>> ?@@ -40,6 +40,7 @@ obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL) += egalax_ts_serial.o
>> ??obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
>> ??obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o
>> ??obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
>> ?+obj-$(CONFIG_TOUCHSCREEN_ILI2139) += ili2139.o
>> ??obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o
>> ??obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
>> ??obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o
>> ?diff --git a/drivers/input/touchscreen/ili2139.c b/drivers/input/touchscreen/ili2139.c
>> ?new file mode 100644
>> ?index 0000000..65c2dea
>> ?--- /dev/null
>> ?+++ b/drivers/input/touchscreen/ili2139.c
>> ?@@ -0,0 +1,320 @@
>> ?+/* -------------------------------------------------------------------------
>> ?+ * Copyright (C) 2016, Icenowy Zheng <icenowy@aosc.xyz>
>> ?+ *
>> ?+ * Derived from:
>> ?+ * ili210x.c
>> ?+ * Copyright (C) Olivier Sobrie <olivier@sobrie.be>
>> ?+ *
>> ?+ * This program is free software; you can redistribute it and/or modify
>> ?+ * it under the terms of the GNU General Public License as published by
>> ?+ * the Free Software Foundation; either version 2 of the License, or
>> ?+ * (at your option) any later version.
>> ?+ *
>> ?+ * This program is distributed in the hope that it will be useful,
>> ?+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> ?+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> ?+ * GNU General Public License for more details.
>> ?+ * -------------------------------------------------------------------------
>> ?+ */
>> ?+
>> ?+#include <linux/module.h>
>> ?+#include <linux/i2c.h>
>> ?+#include <linux/interrupt.h>
>> ?+#include <linux/slab.h>
>> ?+#include <linux/input.h>
>> ?+#include <linux/input/mt.h>
>> ?+#include <linux/input/touchscreen.h>
>> ?+#include <linux/delay.h>
>> ?+#include <linux/workqueue.h>
>> ?+
>> ?+#define DEFAULT_POLL_PERIOD 20
>> ?+
>> ?+#define MAX_TOUCHES 10
>> ?+#define COMPATIBLE_TOUCHES 2
>> ?+
>> ?+/* Touchscreen commands */
>> ?+#define REG_TOUCHDATA 0x10
>> ?+#define REG_TOUCHSUBDATA 0x11
>> ?+#define REG_PANEL_INFO 0x20
>> ?+#define REG_FIRMWARE_VERSION 0x40
>> ?+#define REG_PROTO_VERSION 0x42
>> ?+
>> ?+#define SUBDATA_STATUS_TOUCH_POINT 0x80
>> ?+#define SUBDATA_STATUS_RELEASE_POINT 0x00
>> ?+
>> ?+struct finger {
>> ?+ u8 x_low;
>> ?+ u8 x_high;
>> ?+ u8 y_low;
>> ?+ u8 y_high;
>> ?+} __packed;
>> ?+
>> ?+struct touchdata {
>> ?+ u8 length;
>> ?+ struct finger finger[COMPATIBLE_TOUCHES];
>> ?+} __packed;
>> ?+
>> ?+struct touch_subdata {
>> ?+ u8 status;
>> ?+ struct finger finger;
>> ?+} __packed;
>> ?+
>> ?+struct panel_info {
>> ?+ struct finger finger_max;
>> ?+ u8 xchannel_num;
>> ?+ u8 ychannel_num;
>> ?+} __packed;
>> ?+
>> ?+struct firmware_version {
>> ?+ u8 id;
>> ?+ u8 major;
>> ?+ u8 minor;
>> ?+} __packed;
>> ?+
>> ?+struct ili2139 {
>> ?+ struct i2c_client *client;
>> ?+ struct input_dev *input;
>> ?+ unsigned int poll_period;
>> ?+ struct delayed_work dwork;
>> ?+ struct touchscreen_properties prop;
>> ?+ int slots[MAX_TOUCHES];
>> ?+ int ids[MAX_TOUCHES];
>> ?+ struct input_mt_pos pos[MAX_TOUCHES];
>> ?+};
>> ?+
>> ?+static int ili2139_read_reg(struct i2c_client *client, u8 reg, void *buf,
>> ?+ size_t len)
>> ?+{
>> ?+ struct i2c_msg msg[2] = {
>> ?+ {
>> ?+ .addr = client->addr,
>> ?+ .flags = 0,
>> ?+ .len = 1,
>> ?+ .buf = &reg,
>> ?+ },
>> ?+ {
>> ?+ .addr = client->addr,
>> ?+ .flags = I2C_M_RD,
>> ?+ .len = len,
>> ?+ .buf = buf,
>> ?+ }
>> ?+ };
>> ?+
>> ?+ if (i2c_transfer(client->adapter, msg, 2) != 2) {
>> ?+ dev_err(&client->dev, "i2c transfer failed\n");
>> ?+ return -EIO;
>> ?+ }
>> ?+
>> ?+ return 0;
>> ?+}
>> ?+
>> ?+static void ili2139_work(struct work_struct *work)
>> ?+{
>> ?+ int id;
>> ?+ struct ili2139 *priv = container_of(work, struct ili2139,
>> ?+ dwork.work);
>> ?+ struct i2c_client *client = priv->client;
>> ?+ struct touchdata touchdata;
>> ?+ struct touch_subdata subdata;
>> ?+ int error;
>> ?+
>> ?+ error = ili2139_read_reg(client, REG_TOUCHDATA,
>> ?+ &touchdata, sizeof(touchdata));
>> ?+ if (error) {
>> ?+ dev_err(&client->dev,
>> ?+ "Unable to get touchdata, err = %d\n", error);
>> ?+ return;
>> ?+ }
>> ?+
>> ?+ for (id = 0; id < touchdata.length; id++) {
>> ?+ error = ili2139_read_reg(client, REG_TOUCHSUBDATA, &subdata,
>> ?+ sizeof(subdata));
>> ?+ if (error) {
>> ?+ dev_err(&client->dev,
>> ?+ "Unable to get touch subdata, err = %d\n",
>> ?+ error);
>> ?+ return;
>> ?+ }
>> ?+
>> ?+ priv->ids[id] = subdata.status & 0x3F;
>> ?+
>> ?+ /* The sequence changed in the v2 subdata protocol. */
>> ?+ touchscreen_set_mt_pos(&priv->pos[id], &priv->prop,
>> ?+ (subdata.finger.x_high | (subdata.finger.x_low << 8)),
>> ?+ (subdata.finger.y_high | (subdata.finger.y_low << 8)));
>> ?+ }
>> ?+
>> ?+ input_mt_assign_slots(priv->input, priv->slots, priv->pos,
>> ?+ touchdata.length, 0);
>> ?+
>> ?+ for (id = 0; id < touchdata.length; id++) {
>> ?+ input_mt_slot(priv->input, priv->slots[id]);
>> ?+ input_mt_report_slot_state(priv->input, MT_TOOL_FINGER,
>> ?+ subdata.status &
>> ?+ SUBDATA_STATUS_TOUCH_POINT);
>> ?+ input_report_abs(priv->input, ABS_MT_POSITION_X,
>> ?+ priv->pos[id].x);
>> ?+ input_report_abs(priv->input, ABS_MT_POSITION_Y,
>> ?+ priv->pos[id].y);
>> ?+ }
>> ?+
>> ?+ input_mt_sync_frame(priv->input);
>> ?+ input_sync(priv->input);
>> ?+
>> ?+ schedule_delayed_work(&priv->dwork,
>> ?+ msecs_to_jiffies(priv->poll_period));
>> ?+}
>> ?+
>> ?+static irqreturn_t ili2139_irq(int irq, void *irq_data)
>> ?+{
>> ?+ struct ili2139 *priv = irq_data;
>> ?+
>> ?+ schedule_delayed_work(&priv->dwork, 0);
>> ?+
>> ?+ return IRQ_HANDLED;
>> ?+}
>> ?+
>> ?+static int ili2139_i2c_probe(struct i2c_client *client,
>> ?+ const struct i2c_device_id *id)
>> ?+{
>> ?+ struct device *dev = &client->dev;
>> ?+ struct ili2139 *priv;
>> ?+ struct input_dev *input;
>> ?+ struct panel_info panel;
>> ?+ struct firmware_version firmware;
>> ?+ int xmax, ymax;
>> ?+ int error;
>> ?+
>> ?+ dev_dbg(dev, "Probing for ILI2139 I2C Touschreen driver");
>> ?+
>> ?+ if (client->irq <= 0) {
>> ?+ dev_err(dev, "No IRQ!\n");
>> ?+ return -ENODEV;
>> ?+ }
>> ?+
>> ?+ /* Get firmware version */
>> ?+ error = ili2139_read_reg(client, REG_FIRMWARE_VERSION,
>> ?+ &firmware, sizeof(firmware));
>> ?+ if (error) {
>> ?+ dev_err(dev, "Failed to get firmware version, err: %d\n",
>> ?+ error);
>> ?+ return error;
>> ?+ }
>> ?+
>> ?+ /* get panel info */
>> ?+ error = ili2139_read_reg(client, REG_PANEL_INFO, &panel, sizeof(panel));
>> ?+ if (error) {
>> ?+ dev_err(dev, "Failed to get panel information, err: %d\n",
>> ?+ error);
>> ?+ return error;
>> ?+ }
>> ?+
>> ?+ xmax = panel.finger_max.x_low | (panel.finger_max.x_high << 8);
>> ?+ ymax = panel.finger_max.y_low | (panel.finger_max.y_high << 8);
>> ?+
>> ?+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> ?+ input = devm_input_allocate_device(dev);
>> ?+ if (!priv || !input)
>> ?+ return -ENOMEM;
>> ?+
>> ?+ priv->client = client;
>> ?+ priv->input = input;
>> ?+ priv->poll_period = DEFAULT_POLL_PERIOD;
>> ?+ INIT_DELAYED_WORK(&priv->dwork, ili2139_work);
>> ?+
>> ?+ /* Setup input device */
>> ?+ input->name = "ILI2139 Touchscreen";
>> ?+ input->id.bustype = BUS_I2C;
>> ?+ input->dev.parent = dev;
>> ?+
>> ?+ __set_bit(EV_SYN, input->evbit);
>> ?+ __set_bit(EV_KEY, input->evbit);
>> ?+ __set_bit(EV_ABS, input->evbit);
>> ?+
>> ?+ /* Multi touch */
>> ?+ input_mt_init_slots(input, MAX_TOUCHES, INPUT_MT_DIRECT |
>> ?+ INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK);
>> ?+ input_set_abs_params(input, ABS_MT_POSITION_X, 0, xmax, 0, 0);
>> ?+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ymax, 0, 0);
>> ?+
>> ?+ touchscreen_parse_properties(input, true, &priv->prop);
>> ?+
>> ?+ input_set_drvdata(input, priv);
>> ?+ i2c_set_clientdata(client, priv);
>> ?+
>> ?+ error = devm_request_irq(dev, client->irq, ili2139_irq,
>> ?+ IRQF_TRIGGER_FALLING, client->name, priv);
>> ?+ if (error) {
>> ?+ dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n",
>> ?+ error);
>> ?+ return error;
>> ?+ }
>> ?+
>> ?+ error = input_register_device(priv->input);
>> ?+ if (error) {
>> ?+ dev_err(dev, "Cannot register input device, err: %d\n", error);
>> ?+ return error;
>> ?+ }
>> ?+
>> ?+ device_init_wakeup(&client->dev, 1);
>> ?+
>> ?+ dev_dbg(dev,
>> ?+ "ILI2139 initialized (IRQ: %d), firmware version %d.%d.%d",
>> ?+ client->irq, firmware.id, firmware.major, firmware.minor);
>> ?+
>> ?+ return 0;
>> ?+}
>> ?+
>> ?+static int ili2139_i2c_remove(struct i2c_client *client)
>> ?+{
>> ?+ struct ili2139 *priv = i2c_get_clientdata(client);
>> ?+
>> ?+ cancel_delayed_work_sync(&priv->dwork);
>> ?+
>> ?+ return 0;
>> ?+}
>> ?+
>> ?+static int __maybe_unused ili2139_i2c_suspend(struct device *dev)
>> ?+{
>> ?+ struct i2c_client *client = to_i2c_client(dev);
>> ?+
>> ?+ if (device_may_wakeup(&client->dev))
>> ?+ enable_irq_wake(client->irq);
>> ?+
>> ?+ return 0;
>> ?+}
>> ?+
>> ?+static int __maybe_unused ili2139_i2c_resume(struct device *dev)
>> ?+{
>> ?+ struct i2c_client *client = to_i2c_client(dev);
>> ?+
>> ?+ if (device_may_wakeup(&client->dev))
>> ?+ disable_irq_wake(client->irq);
>> ?+
>> ?+ return 0;
>> ?+}
>> ?+
>> ?+static SIMPLE_DEV_PM_OPS(ili2139_i2c_pm,
>> ?+ ili2139_i2c_suspend, ili2139_i2c_resume);
>> ?+
>> ?+static const struct i2c_device_id ili2139_i2c_id[] = {
>> ?+ { "ili2139", 0 },
>> ?+ { }
>> ?+};
>> ?+MODULE_DEVICE_TABLE(i2c, ili2139_i2c_id);
>> ?+
>> ?+static struct i2c_driver ili2139_ts_driver = {
>> ?+ .driver = {
>> ?+ .name = "ili2139_i2c",
>> ?+ .pm = &ili2139_i2c_pm,
>> ?+ },
>> ?+ .id_table = ili2139_i2c_id,
>> ?+ .probe = ili2139_i2c_probe,
>> ?+ .remove = ili2139_i2c_remove,
>> ?+};
>> ?+
>> ?+module_i2c_driver(ili2139_ts_driver);
>> ?+
>> ?+MODULE_AUTHOR("Olivier Sobrie <olivier@sobrie.be>");
>> ?+MODULE_DESCRIPTION("ILI2139 I2C Touchscreen Driver");
>> ?+MODULE_LICENSE("GPL");
>> ?--
>> ?2.10.1
>
> --
> Dmitry

[PATCH 3/5] Input: add driver for Ilitek ili2139 touch IC

[Dmitry Torokhov]

On Wed, Oct 12, 2016 at 02:34:01AM +0800, Icenowy Zheng wrote:
> 
> 
> 12.10.2016, 01:40, "Dmitry Torokhov" <dmitry.torokhov@gmail.com>:
> > Hi Icenowy,
> >
> > On Tue, Oct 11, 2016 at 08:33:57AM +0800, Icenowy Zheng wrote:
> >> ?This driver adds support for Ilitek ili2139 touch IC, which is used in
> >> ?several Colorfly tablets (for example, Colorfly E708 Q1, which is an
> >> ?Allwinner A31s tablet with mainline kernel support).
> >>
> >> ?Theortically it may support more Ilitek touch ICs, however, only ili2139
> >> ?is used in any mainlined device.
> >>
> >> ?It supports device tree enumeration, with screen resolution and axis
> >> ?quirks configurable.
> >>
> >> ?Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> >
> > Please extend ili210x.c instead of adding brand new driver, they look
> > very similar.
> >
> > Thanks.
> 
> The driver is too old, lack of maintaince and needs some platform data hacks.
> (At least makes it not capable to be used on current ARM devices, as they're
> described with device tree)

There are many drivers that can do both platform and dt-setup.

> 
> Maybe I will rename the new driver modified by me to ili210x, add support for
> the old protocol (but I have no chips to test it), and drop the old ili210x.
> (This driver is capable of dt probing, and uses devm_ functions)

You can add "racy on removal" to the list (you need to take care your
work is canceled at right times, and canceling it before interrupt is
freed is not the right time as interrupt might fire and the work get
scheduled again). Also I think your driver is essentially working in
polling mode because you always reschedule the delayed work.

No, like I said, please work with existing driver, adding DT support and
support for the newer version of the protocol.

Thanks.

-- 
Dmitry

[PATCH 4/5] MAINTAINERS: Add myself as maintainer of ili2139 touchscreen driver

[Icenowy Zheng]

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
 MAINTAINERS | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index a009e00..8f8341b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6112,6 +6112,12 @@ M:	Stanislaw Gruszka <stf_xl@wp.pl>
 S:	Maintained
 F:	drivers/usb/atm/ueagle-atm.c
 
+ILI2139 TOUCHSCREEN DRIVER
+M:	Icenowy Zheng <icenowy@aosc.xyz>
+S:	Maintained
+F:	Documentation/devicetree/bindings/input/touchscreen/ilitek_ili2139.txt
+F:	drivers/input/touchscreen/ili2139.c
+
 INA209 HARDWARE MONITOR DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-hwmon at vger.kernel.org
-- 
2.10.1

[PATCH 5/5] ARM: dts: sun6i: enable ili2139 on Colorfly E708 Q1

[Icenowy Zheng]

Many users report that their Colorfly E708 Q1's come with ili2139 touch
IC. This patch adds the device node of this IC.

It seems that two devices are attached to I2C bus 1: a ili2139 touch
controller at 0x41, and a stil unknown device at 0x38. So make PA2
controlled by a dummy regulator node, rather than a power sequence GPIO
for ili2139.

There's also some users who report that their tablets come with touch
screen with Goodix GT911 touch IC. In the device, the touch IC is
connected on the screen rather soldered on the PCB, so the two touch
screens may be both acceptable FRUs of the tablet. They have different
addresses, and may be runtime detectable. (The Allwinner BSP kernel have
such a detection method, however, mainline kernel have no such method
now except enable both touch ICs' driver and wait for one driver's
failure)

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
 arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts | 48 +++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
index 882a4d8..73ac574 100644
--- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
@@ -47,6 +47,38 @@
 / {
 	model = "Colorfly E708 Q1 tablet";
 	compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
+
+	/* This is actually a common reset line for both the
+	 * touchscreen and the accelerometer.
+	 */
+	i2c1_on: i2c1_on {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_on_e708_q1>;
+
+		regulator-name = "i2c1_on";
+		regulator-min-microvolt = "3000000";
+		regulator-max-microvolt = "3000000";
+		regulator-always-on;
+		gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>; /* PA2 */
+		enable-active-high;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+
+	ctp at 41 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ili2139_int_e708_q1>;
+
+		compatible = "ilitek,ili2139", "ili2139";
+		reg = <0x41>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+	};
 };
 
 &lradc {
@@ -61,6 +93,22 @@
 	};
 };
 
+&pio {
+	i2c1_on_e708_q1: i2c1_on at 0 {
+		allwinner,pins = "PA2";
+	        allwinner,function = "gpio_out";
+	        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+	        allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	ili2139_int_e708_q1: ili2139_int at 0 {
+		allwinner,pins = "PA3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
 &reg_dldo2 {
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
-- 
2.10.1

[PATCH 1/5] dt-bindings: add vendor prefix for ILI Technology Corp

[Dmitry Torokhov]

On Mon, Oct 10, 2016 at 5:33 PM, Icenowy Zheng <icenowy@aosc.xyz> wrote:
> ILI Technology Corp (a.k.a Ilitek, http://www.ilitek.com/index-e.asp ) is a
> company that produces LCD driver ICs and touch screen controller ICs.

Was there patch 3/5? I do not see it in my mailbox.

>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 24c6f65..4d37fdc 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -130,6 +130,7 @@ i2se        I2SE GmbH
>  ibm    International Business Machines (IBM)
>  idt    Integrated Device Technologies, Inc.
>  ifi    Ingenieurburo Fur Ic-Technologie (I/F/I)
> +ilitek ILI Technologies Corp.
>  img    Imagination Technologies Ltd.
>  infineon Infineon Technologies
>  inforce        Inforce Computing
> --
> 2.10.1
>



-- 
Dmitry

[PATCH 1/5] dt-bindings: add vendor prefix for ILI Technology Corp

[Icenowy Zheng]

11.10.2016, 11:13, "Dmitry Torokhov" <dmitry.torokhov@gmail.com>:
> On Mon, Oct 10, 2016 at 5:33 PM, Icenowy Zheng <icenowy@aosc.xyz> wrote:
>> ?ILI Technology Corp (a.k.a Ilitek, http://www.ilitek.com/index-e.asp ) is a
>> ?company that produces LCD driver ICs and touch screen controller ICs.
>
> Was there patch 3/5? I do not see it in my mailbox.

Maybe it's spammed.

It can be retrieved at https://groups.google.com/d/msg/linux-sunxi/FY88KGfeCvk/tkEt6C4uBwAJ or http://lists.infradead.org/pipermail/linux-arm-kernel/2016-October/460908.html .

>
>> ?Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
>> ?---
>> ??Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>> ??1 file changed, 1 insertion(+)
>>
>> ?diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
>> ?index 24c6f65..4d37fdc 100644
>> ?--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
>> ?+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
>> ?@@ -130,6 +130,7 @@ i2se I2SE GmbH
>> ??ibm International Business Machines (IBM)
>> ??idt Integrated Device Technologies, Inc.
>> ??ifi Ingenieurburo Fur Ic-Technologie (I/F/I)
>> ?+ilitek ILI Technologies Corp.
>> ??img Imagination Technologies Ltd.
>> ??infineon Infineon Technologies
>> ??inforce Inforce Computing
>> ?--
>> ?2.10.1
>
> --
> Dmitry