From: boris.brezillon@free-electrons.com (Boris Brezillon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 02/28] [v2] mtd: mtk: avoid warning in mtk_ecc_encode
Date: Tue, 18 Oct 2016 07:19:48 +0200 [thread overview]
Message-ID: <20161018071948.0b7eef05@bbrezillon> (raw)
In-Reply-To: <20161017220557.1688282-2-arnd@arndb.de>
On Tue, 18 Oct 2016 00:05:31 +0200
Arnd Bergmann <arnd@arndb.de> wrote:
> When building with -Wmaybe-uninitialized, gcc produces a silly false positive
> warning for the mtk_ecc_encode function:
>
> drivers/mtd/nand/mtk_ecc.c: In function 'mtk_ecc_encode':
> drivers/mtd/nand/mtk_ecc.c:402:15: error: 'val' may be used uninitialized in this function [-Werror=maybe-uninitialized]
>
> The function for some reason contains a double byte swap on big-endian
> builds to get the OOB data into the correct order again, and is written
> in a slightly confusing way.
>
> Using a simple memcpy32_fromio() to read the data simplifies it a lot
> so it becomes more readable and produces no warning. However, the
> output might not have 32-bit alignment, so we have to use another
> memcpy to avoid taking alignment faults or writing beyond the end
> of the array.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Jorge, RogerCC, can I have an Acked-by and/or Tested-by for this patch?
> ---
> v2: move temporary buffer into struct mtk_ecc instead of having it
> on the stack, as suggested by Boris Brezillon
> ---
> drivers/mtd/nand/mtk_ecc.c | 19 +++++++++----------
> 1 file changed, 9 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/mtd/nand/mtk_ecc.c b/drivers/mtd/nand/mtk_ecc.c
> index d54f666..dbf2562 100644
> --- a/drivers/mtd/nand/mtk_ecc.c
> +++ b/drivers/mtd/nand/mtk_ecc.c
> @@ -86,6 +86,8 @@ struct mtk_ecc {
> struct completion done;
> struct mutex lock;
> u32 sectors;
> +
> + u8 eccdata[112];
> };
>
> static inline void mtk_ecc_wait_idle(struct mtk_ecc *ecc,
> @@ -366,9 +368,8 @@ int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config,
> u8 *data, u32 bytes)
> {
> dma_addr_t addr;
> - u8 *p;
> - u32 len, i, val;
> - int ret = 0;
> + u32 len;
> + int ret;
>
> addr = dma_map_single(ecc->dev, data, bytes, DMA_TO_DEVICE);
> ret = dma_mapping_error(ecc->dev, addr);
> @@ -393,14 +394,12 @@ int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config,
>
> /* Program ECC bytes to OOB: per sector oob = FDM + ECC + SPARE */
> len = (config->strength * ECC_PARITY_BITS + 7) >> 3;
> - p = data + bytes;
>
> - /* write the parity bytes generated by the ECC back to the OOB region */
> - for (i = 0; i < len; i++) {
> - if ((i % 4) == 0)
> - val = readl(ecc->regs + ECC_ENCPAR(i / 4));
> - p[i] = (val >> ((i % 4) * 8)) & 0xff;
> - }
> + /* write the parity bytes generated by the ECC back to temp buffer */
> + __ioread32_copy(ecc->eccdata, ecc->regs + ECC_ENCPAR(0), round_up(len, 4));
> +
> + /* copy into possibly unaligned OOB region with actual length */
> + memcpy(data + bytes, ecc->eccdata, len);
> timeout:
>
> dma_unmap_single(ecc->dev, addr, bytes, DMA_TO_DEVICE);
next prev parent reply other threads:[~2016-10-18 5:19 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20161017220342.1627073-1-arnd@arndb.de>
2016-10-17 22:05 ` [PATCH 02/28] [v2] mtd: mtk: avoid warning in mtk_ecc_encode Arnd Bergmann
2016-10-18 5:19 ` Boris Brezillon [this message]
2016-10-18 10:12 ` RogerCC.Lin
2016-10-18 19:45 ` Boris Brezillon
2016-10-17 22:16 ` [PATCH 20/28] net: bcm63xx: avoid referencing uninitialized variable Arnd Bergmann
2016-10-18 18:21 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161018071948.0b7eef05@bbrezillon \
--to=boris.brezillon@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).