* [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3 @ 2016-10-05 9:48 Corentin Labbe 2016-10-05 10:21 ` Jean-Francois Moine 0 siblings, 1 reply; 6+ messages in thread From: Corentin Labbe @ 2016-10-05 9:48 UTC (permalink / raw) To: linux-arm-kernel This patch add support for the sunxi-sid driver to the device tree for sun8i-h3. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> --- arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 9f58bb4..abfd29c 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -211,6 +211,11 @@ #size-cells = <0>; }; + sid: eeprom at 01c14200 { + compatible = "allwinner,sun7i-a20-sid"; + reg = <0x01c14200 0x200>; + }; + usbphy: phy at 01c19400 { compatible = "allwinner,sun8i-h3-usb-phy"; reg = <0x01c19400 0x2c>, -- 2.7.3 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3 2016-10-05 9:48 [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3 Corentin Labbe @ 2016-10-05 10:21 ` Jean-Francois Moine 2016-10-19 7:40 ` LABBE Corentin 0 siblings, 1 reply; 6+ messages in thread From: Jean-Francois Moine @ 2016-10-05 10:21 UTC (permalink / raw) To: linux-arm-kernel On Wed, 5 Oct 2016 11:48:24 +0200 Corentin Labbe <clabbe.montjoie@gmail.com> wrote: > This patch add support for the sunxi-sid driver to the device tree for sun8i-h3. > > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> > --- > arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi > index 9f58bb4..abfd29c 100644 > --- a/arch/arm/boot/dts/sun8i-h3.dtsi > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi > @@ -211,6 +211,11 @@ > #size-cells = <0>; > }; > > + sid: eeprom at 01c14200 { > + compatible = "allwinner,sun7i-a20-sid"; > + reg = <0x01c14200 0x200>; The datasheet says 1Kb starting at 0x01c14000. Is there any reason to reduce the area and to shift the offset? > + }; > + > usbphy: phy at 01c19400 { > compatible = "allwinner,sun8i-h3-usb-phy"; > reg = <0x01c19400 0x2c>, > -- > 2.7.3 -- Ken ar c'henta? | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/ ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3 2016-10-05 10:21 ` Jean-Francois Moine @ 2016-10-19 7:40 ` LABBE Corentin 2016-10-20 20:36 ` Maxime Ripard 0 siblings, 1 reply; 6+ messages in thread From: LABBE Corentin @ 2016-10-19 7:40 UTC (permalink / raw) To: linux-arm-kernel On Wed, Oct 05, 2016 at 12:21:30PM +0200, Jean-Francois Moine wrote: > On Wed, 5 Oct 2016 11:48:24 +0200 > Corentin Labbe <clabbe.montjoie@gmail.com> wrote: > > > This patch add support for the sunxi-sid driver to the device tree for sun8i-h3. > > > > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> > > --- > > arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi > > index 9f58bb4..abfd29c 100644 > > --- a/arch/arm/boot/dts/sun8i-h3.dtsi > > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi > > @@ -211,6 +211,11 @@ > > #size-cells = <0>; > > }; > > > > + sid: eeprom at 01c14200 { > > + compatible = "allwinner,sun7i-a20-sid"; > > + reg = <0x01c14200 0x200>; > > The datasheet says 1Kb starting at 0x01c14000. > Is there any reason to reduce the area and to shift the offset? > According to http://linux-sunxi.org/SID_Register_Guide "For Allwinner A83T and H3 the SID address space starts at 0x01c14000, and the e-fuses are at offset 0x200". So I use this offset, since the sunxi_sid driver need the base address of e-fuses. The easiest solution is to use 0x01c14200 since the other part of sid is not used and not known (A83T/H3 user manual doesnt give any information on all sid space, worse for A64 which reference SID only in memory map). So probably for H3/A64/A83T, there will never any usage of the rest of the SID address space. Regards Corentin Labbe ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3 2016-10-19 7:40 ` LABBE Corentin @ 2016-10-20 20:36 ` Maxime Ripard 2016-10-23 8:26 ` LABBE Corentin 0 siblings, 1 reply; 6+ messages in thread From: Maxime Ripard @ 2016-10-20 20:36 UTC (permalink / raw) To: linux-arm-kernel On Wed, Oct 19, 2016 at 09:40:16AM +0200, LABBE Corentin wrote: > On Wed, Oct 05, 2016 at 12:21:30PM +0200, Jean-Francois Moine wrote: > > On Wed, 5 Oct 2016 11:48:24 +0200 > > Corentin Labbe <clabbe.montjoie@gmail.com> wrote: > > > > > This patch add support for the sunxi-sid driver to the device tree for sun8i-h3. > > > > > > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> > > > --- > > > arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++ > > > 1 file changed, 5 insertions(+) > > > > > > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi > > > index 9f58bb4..abfd29c 100644 > > > --- a/arch/arm/boot/dts/sun8i-h3.dtsi > > > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi > > > @@ -211,6 +211,11 @@ > > > #size-cells = <0>; > > > }; > > > > > > + sid: eeprom at 01c14200 { > > > + compatible = "allwinner,sun7i-a20-sid"; > > > + reg = <0x01c14200 0x200>; > > > > The datasheet says 1Kb starting at 0x01c14000. > > Is there any reason to reduce the area and to shift the offset? > > > > According to http://linux-sunxi.org/SID_Register_Guide "For > Allwinner A83T and H3 the SID address space starts at 0x01c14000, > and the e-fuses are at offset 0x200". > > So I use this offset, since the sunxi_sid driver need the base > address of e-fuses. > > The easiest solution is to use 0x01c14200 since the other part of > sid is not used and not known (A83T/H3 user manual doesnt give any > information on all sid space, worse for A64 which reference SID only > in memory map). > > So probably for H3/A64/A83T, there will never any usage of the rest > of the SID address space. And since we can't know that, and we have to maintain the DT ABI, using the whole address map and an offset, with a new compatible, is definetely the safest thing to do. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161020/dec6def5/attachment.sig> ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3 2016-10-20 20:36 ` Maxime Ripard @ 2016-10-23 8:26 ` LABBE Corentin 2016-10-24 14:05 ` Maxime Ripard 0 siblings, 1 reply; 6+ messages in thread From: LABBE Corentin @ 2016-10-23 8:26 UTC (permalink / raw) To: linux-arm-kernel On Thu, Oct 20, 2016 at 10:36:54PM +0200, Maxime Ripard wrote: > On Wed, Oct 19, 2016 at 09:40:16AM +0200, LABBE Corentin wrote: > > On Wed, Oct 05, 2016 at 12:21:30PM +0200, Jean-Francois Moine wrote: > > > On Wed, 5 Oct 2016 11:48:24 +0200 > > > Corentin Labbe <clabbe.montjoie@gmail.com> wrote: > > > > > > > This patch add support for the sunxi-sid driver to the device tree for sun8i-h3. > > > > > > > > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> > > > > --- > > > > arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++ > > > > 1 file changed, 5 insertions(+) > > > > > > > > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi > > > > index 9f58bb4..abfd29c 100644 > > > > --- a/arch/arm/boot/dts/sun8i-h3.dtsi > > > > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi > > > > @@ -211,6 +211,11 @@ > > > > #size-cells = <0>; > > > > }; > > > > > > > > + sid: eeprom at 01c14200 { > > > > + compatible = "allwinner,sun7i-a20-sid"; > > > > + reg = <0x01c14200 0x200>; > > > > > > The datasheet says 1Kb starting at 0x01c14000. > > > Is there any reason to reduce the area and to shift the offset? > > > > > > > According to http://linux-sunxi.org/SID_Register_Guide "For > > Allwinner A83T and H3 the SID address space starts at 0x01c14000, > > and the e-fuses are at offset 0x200". > > > > So I use this offset, since the sunxi_sid driver need the base > > address of e-fuses. > > > > The easiest solution is to use 0x01c14200 since the other part of > > sid is not used and not known (A83T/H3 user manual doesnt give any > > information on all sid space, worse for A64 which reference SID only > > in memory map). > > > > So probably for H3/A64/A83T, there will never any usage of the rest > > of the SID address space. > > And since we can't know that, and we have to maintain the DT ABI, > using the whole address map and an offset, with a new compatible, is > definetely the safest thing to do. > I have two way of doing it, which one do you prefer ? - Adding two optionnal properties: efuses-offset and efuses-size defaulting to 0 and resourcesize. - Adding a subnode called efuses with its own reg=<> The first one is easy and didnt need any work on previous DT entries. Regards Corentin Labbe ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3 2016-10-23 8:26 ` LABBE Corentin @ 2016-10-24 14:05 ` Maxime Ripard 0 siblings, 0 replies; 6+ messages in thread From: Maxime Ripard @ 2016-10-24 14:05 UTC (permalink / raw) To: linux-arm-kernel On Sun, Oct 23, 2016 at 10:26:31AM +0200, LABBE Corentin wrote: > On Thu, Oct 20, 2016 at 10:36:54PM +0200, Maxime Ripard wrote: > > On Wed, Oct 19, 2016 at 09:40:16AM +0200, LABBE Corentin wrote: > > > On Wed, Oct 05, 2016 at 12:21:30PM +0200, Jean-Francois Moine wrote: > > > > On Wed, 5 Oct 2016 11:48:24 +0200 > > > > Corentin Labbe <clabbe.montjoie@gmail.com> wrote: > > > > > > > > > This patch add support for the sunxi-sid driver to the device tree for sun8i-h3. > > > > > > > > > > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> > > > > > --- > > > > > arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++ > > > > > 1 file changed, 5 insertions(+) > > > > > > > > > > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi > > > > > index 9f58bb4..abfd29c 100644 > > > > > --- a/arch/arm/boot/dts/sun8i-h3.dtsi > > > > > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi > > > > > @@ -211,6 +211,11 @@ > > > > > #size-cells = <0>; > > > > > }; > > > > > > > > > > + sid: eeprom at 01c14200 { > > > > > + compatible = "allwinner,sun7i-a20-sid"; > > > > > + reg = <0x01c14200 0x200>; > > > > > > > > The datasheet says 1Kb starting at 0x01c14000. > > > > Is there any reason to reduce the area and to shift the offset? > > > > > > > > > > According to http://linux-sunxi.org/SID_Register_Guide "For > > > Allwinner A83T and H3 the SID address space starts at 0x01c14000, > > > and the e-fuses are at offset 0x200". > > > > > > So I use this offset, since the sunxi_sid driver need the base > > > address of e-fuses. > > > > > > The easiest solution is to use 0x01c14200 since the other part of > > > sid is not used and not known (A83T/H3 user manual doesnt give any > > > information on all sid space, worse for A64 which reference SID only > > > in memory map). > > > > > > So probably for H3/A64/A83T, there will never any usage of the rest > > > of the SID address space. > > > > And since we can't know that, and we have to maintain the DT ABI, > > using the whole address map and an offset, with a new compatible, is > > definetely the safest thing to do. > > > > I have two way of doing it, which one do you prefer ? > > - Adding two optionnal properties: efuses-offset and efuses-size defaulting to 0 and resourcesize. > - Adding a subnode called efuses with its own reg=<> > > The first one is easy and didnt need any work on previous DT entries. I'd prefer to have a compatible, and the size and/or offset of the efuses associated to it. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161024/d93d1bab/attachment-0001.sig> ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-10-24 14:05 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-10-05 9:48 [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3 Corentin Labbe 2016-10-05 10:21 ` Jean-Francois Moine 2016-10-19 7:40 ` LABBE Corentin 2016-10-20 20:36 ` Maxime Ripard 2016-10-23 8:26 ` LABBE Corentin 2016-10-24 14:05 ` Maxime Ripard
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).