From mboxrd@z Thu Jan 1 00:00:00 1970 From: alexandre.belloni@free-electrons.com (Alexandre Belloni) Date: Thu, 20 Oct 2016 11:41:35 +0200 Subject: [PATCH v2 6/6] ARM: at91: debug: add samx7 support In-Reply-To: <20161020094135.18221-1-alexandre.belloni@free-electrons.com> References: <20161020094135.18221-1-alexandre.belloni@free-electrons.com> Message-ID: <20161020094135.18221-7-alexandre.belloni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Szemz? Andr?s Add support for low level debugging on Atmel samx7. Signed-off-by: Szemz? Andr?s Signed-off-by: Alexandre Belloni --- arch/arm/Kconfig.debug | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index d83f7c369e51..219e65c85289 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -145,6 +145,15 @@ choice Say Y here if you want kernel low-level debugging support on the USART3 port of sama5d4. + config DEBUG_AT91_SAMX7_USART1 + bool "Kernel low-level debugging via SAMX7 USART1" + select DEBUG_AT91_UART + depends on SOC_SAMX7 + help + Say Y here if you want the debug print routines to direct + their output to the USART1 port on SAMX7 based + machines. + config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" depends on ARCH_BCM2835 && ARCH_MULTI_V6 @@ -1481,6 +1490,7 @@ config DEBUG_UART_PHYS default 0x3f201000 if DEBUG_BCM2836 default 0x3e000000 if DEBUG_BCM_KONA_UART default 0x4000e400 if DEBUG_LL_UART_EFM32 + default 0x40028000 if DEBUG_AT91_SAMX7_USART1 default 0x40081000 if DEBUG_LPC18XX_UART0 default 0x40090000 if DEBUG_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 -- 2.9.3