From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 6/9] clk: sunxi-ng: Add A64 clocks
Date: Thu, 20 Oct 2016 11:46:01 -0700 [thread overview]
Message-ID: <20161020184601.GB26139@codeaurora.org> (raw)
In-Reply-To: <cd4dd81821b8910d40626baab2dbfdabd94b1b98.1476196031.git-series.maxime.ripard@free-electrons.com>
On 10/11, Maxime Ripard wrote:
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> new file mode 100644
> index 000000000000..c0e96bf6d104
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> +
> +static int sun50i_a64_ccu_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + void __iomem *reg;
> + u32 val;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + reg = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(reg)) {
> + dev_err(&pdev->dev, "Could not map the clock registers\n");
devm_ioremap_resource() should already spit out an error.
> + return PTR_ERR(reg);
> + }
> +
> + /* Force the PLL-Audio-1x divider to 4 */
> + val = readl(reg + SUN50I_A64_PLL_AUDIO_REG);
> + val &= ~GENMASK(19, 16);
> + writel(val | (3 << 16), reg + SUN50I_A64_PLL_AUDIO_REG);
> +
> + writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG);
> +
> + return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
> +}
> +
> +static const struct of_device_id sun50i_a64_ccu_ids[] = {
> + { .compatible = "allwinner,sun50i-a64-ccu" },
> + { },
Nitpick: drop the comma
> +};
> +
> +static struct platform_driver sun50i_a64_ccu_driver = {
> + .probe = sun50i_a64_ccu_probe,
> + .driver = {
> + .name = "sun50i-a64-ccu",
> + .of_match_table = sun50i_a64_ccu_ids,
> + },
> +};
> +builtin_platform_driver(sun50i_a64_ccu_driver);
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2016-10-20 18:46 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-11 14:28 [PATCH v4 0/9] arm64: Allwinner A64 support based on sunxi-ng Maxime Ripard
2016-10-11 14:28 ` [PATCH v4 1/9] clk: sunxi-ng: Rename the internal structures Maxime Ripard
2016-10-20 14:27 ` [linux-sunxi] " Chen-Yu Tsai
2016-10-20 17:24 ` Maxime Ripard
2016-10-11 14:28 ` [PATCH v4 2/9] clk: sunxi-ng: Remove the use of rational computations Maxime Ripard
2016-10-20 14:30 ` Chen-Yu Tsai
2016-10-20 17:26 ` Maxime Ripard
2016-10-11 14:28 ` [PATCH v4 3/9] clk: sunxi-ng: Finish to convert to structures for arguments Maxime Ripard
2016-10-20 14:35 ` Chen-Yu Tsai
2016-10-20 17:26 ` Maxime Ripard
2016-10-11 14:28 ` [PATCH v4 4/9] clk: sunxi-ng: Add minimums for all the relevant structures and clocks Maxime Ripard
2016-10-20 15:04 ` Chen-Yu Tsai
2016-10-20 17:27 ` Maxime Ripard
2016-10-21 22:57 ` André Przywara
2016-10-24 16:03 ` Maxime Ripard
2016-10-11 14:28 ` [PATCH v4 5/9] clk: sunxi-ng: Implement minimum for multipliers Maxime Ripard
2016-10-20 15:06 ` Chen-Yu Tsai
2016-10-20 17:30 ` Maxime Ripard
2016-10-11 14:28 ` [PATCH v4 6/9] clk: sunxi-ng: Add A64 clocks Maxime Ripard
2016-10-20 15:50 ` [linux-sunxi] " Chen-Yu Tsai
2016-10-20 17:47 ` Maxime Ripard
2016-10-20 18:46 ` Stephen Boyd [this message]
2016-10-24 15:05 ` Maxime Ripard
2016-10-11 14:28 ` [PATCH v4 7/9] arm64: dts: add Allwinner A64 SoC .dtsi Maxime Ripard
2016-10-20 15:14 ` [linux-sunxi] " Chen-Yu Tsai
2016-10-20 17:49 ` Maxime Ripard
2016-10-11 14:28 ` [PATCH v4 8/9] Documentation: devicetree: add vendor prefix for Pine64 Maxime Ripard
2016-10-11 14:28 ` [PATCH v4 9/9] arm64: dts: add Pine64 support Maxime Ripard
2016-10-20 15:17 ` [linux-sunxi] " Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161020184601.GB26139@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).