linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: bjorn.andersson@linaro.org (Bjorn Andersson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] arm64: dts: msm8996: Add SMP2P and APCS nodes
Date: Thu, 20 Oct 2016 13:03:04 -0700	[thread overview]
Message-ID: <20161020200304.GP7509@tuxbot> (raw)
In-Reply-To: <1476989765-7524-4-git-send-email-spjoshi@codeaurora.org>

On Thu 20 Oct 11:56 PDT 2016, Sarangdhar Joshi wrote:

> Add SMP2P and APCS DT nodes required for Qualcomm ADSP
> Peripheral Image Loader.
> 

Nice, two (very) small nits below. But other than that

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/msm8996.dtsi | 30 ++++++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 0a810f5..3edb56b 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -169,6 +169,31 @@
>  		method = "smc";
>  	};
>  
> +	smp2p-adsp {

Sorry for bikeshedding, but on msm8916 I named these {subsystem}-smp2p,
so I would prefer this was naemd adsp-smp2p...

> +		compatible = "qcom,smp2p";
> +		qcom,smem = <443>, <429>;
> +
> +		interrupt-parent = <&intc>;

I believe this node inherit intc as interrupt-parent from the root
already, is there are reason why you need to specify it.

> +		interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
> +
> +		qcom,ipc = <&apcs 16 10>;
> +
> +		qcom,local-pid = <0>;
> +		qcom,remote-pid = <2>;
> +
> +		adsp_smp2p_out: master-kernel {
> +			qcom,entry-name = "master-kernel";
> +			#qcom,state-cells = <1>;
> +		};
> +
> +		adsp_smp2p_in: slave-kernel {
> +			qcom,entry-name = "slave-kernel";
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +	};
> +
>  	smem {
>  		compatible = "qcom,smem";
>  
> @@ -205,6 +230,11 @@
>  			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>  		};
>  
> +		apcs: syscon at 9820000 {
> +			compatible = "syscon";
> +			reg = <0x9820000 0x1000>;
> +		};
> +
>  		gcc: clock-controller at 300000 {
>  			compatible = "qcom,gcc-msm8996";
>  			#clock-cells = <1>;
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

  reply	other threads:[~2016-10-20 20:03 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-20 18:56 [PATCH 1/4] arm64: dts: msm8996: Add SMEM reserve-memory node Sarangdhar Joshi
2016-10-20 18:56 ` [PATCH 2/4] arm64: dts: msm8996: Add reserve-memory nodes Sarangdhar Joshi
2016-10-20 19:57   ` Bjorn Andersson
2016-10-20 21:17     ` Sarangdhar Joshi
2016-10-20 18:56 ` [PATCH 3/4] arm64: dts: msm8996: Add SMEM DT nodes Sarangdhar Joshi
2016-10-20 19:56   ` Bjorn Andersson
2016-10-20 21:18     ` Sarangdhar Joshi
2016-10-20 21:51       ` Andy Gross
2016-10-20 21:59         ` Sarangdhar Joshi
2016-10-20 18:56 ` [PATCH 4/4] arm64: dts: msm8996: Add SMP2P and APCS nodes Sarangdhar Joshi
2016-10-20 20:03   ` Bjorn Andersson [this message]
2016-10-20 21:22     ` Sarangdhar Joshi
2016-10-20 19:57 ` [PATCH 1/4] arm64: dts: msm8996: Add SMEM reserve-memory node Bjorn Andersson
2016-10-20 21:16   ` Sarangdhar Joshi
2016-10-20 21:53     ` Andy Gross

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161020200304.GP7509@tuxbot \
    --to=bjorn.andersson@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).