* [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3
@ 2016-10-05 9:48 Corentin Labbe
2016-10-05 10:21 ` Jean-Francois Moine
0 siblings, 1 reply; 6+ messages in thread
From: Corentin Labbe @ 2016-10-05 9:48 UTC (permalink / raw)
To: linux-arm-kernel
This patch add support for the sunxi-sid driver to the device tree for sun8i-h3.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 9f58bb4..abfd29c 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -211,6 +211,11 @@
#size-cells = <0>;
};
+ sid: eeprom at 01c14200 {
+ compatible = "allwinner,sun7i-a20-sid";
+ reg = <0x01c14200 0x200>;
+ };
+
usbphy: phy at 01c19400 {
compatible = "allwinner,sun8i-h3-usb-phy";
reg = <0x01c19400 0x2c>,
--
2.7.3
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3
2016-10-05 9:48 [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3 Corentin Labbe
@ 2016-10-05 10:21 ` Jean-Francois Moine
2016-10-19 7:40 ` LABBE Corentin
0 siblings, 1 reply; 6+ messages in thread
From: Jean-Francois Moine @ 2016-10-05 10:21 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 5 Oct 2016 11:48:24 +0200
Corentin Labbe <clabbe.montjoie@gmail.com> wrote:
> This patch add support for the sunxi-sid driver to the device tree for sun8i-h3.
>
> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> ---
> arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> index 9f58bb4..abfd29c 100644
> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> @@ -211,6 +211,11 @@
> #size-cells = <0>;
> };
>
> + sid: eeprom at 01c14200 {
> + compatible = "allwinner,sun7i-a20-sid";
> + reg = <0x01c14200 0x200>;
The datasheet says 1Kb starting at 0x01c14000.
Is there any reason to reduce the area and to shift the offset?
> + };
> +
> usbphy: phy at 01c19400 {
> compatible = "allwinner,sun8i-h3-usb-phy";
> reg = <0x01c19400 0x2c>,
> --
> 2.7.3
--
Ken ar c'henta? | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3
2016-10-05 10:21 ` Jean-Francois Moine
@ 2016-10-19 7:40 ` LABBE Corentin
2016-10-20 20:36 ` Maxime Ripard
0 siblings, 1 reply; 6+ messages in thread
From: LABBE Corentin @ 2016-10-19 7:40 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Oct 05, 2016 at 12:21:30PM +0200, Jean-Francois Moine wrote:
> On Wed, 5 Oct 2016 11:48:24 +0200
> Corentin Labbe <clabbe.montjoie@gmail.com> wrote:
>
> > This patch add support for the sunxi-sid driver to the device tree for sun8i-h3.
> >
> > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > ---
> > arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> > index 9f58bb4..abfd29c 100644
> > --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> > @@ -211,6 +211,11 @@
> > #size-cells = <0>;
> > };
> >
> > + sid: eeprom at 01c14200 {
> > + compatible = "allwinner,sun7i-a20-sid";
> > + reg = <0x01c14200 0x200>;
>
> The datasheet says 1Kb starting at 0x01c14000.
> Is there any reason to reduce the area and to shift the offset?
>
According to http://linux-sunxi.org/SID_Register_Guide "For Allwinner A83T and H3 the SID address space starts at 0x01c14000, and the e-fuses are at offset 0x200".
So I use this offset, since the sunxi_sid driver need the base address of e-fuses.
The easiest solution is to use 0x01c14200 since the other part of sid is not used and not known (A83T/H3 user manual doesnt give any information on all sid space, worse for A64 which reference SID only in memory map).
So probably for H3/A64/A83T, there will never any usage of the rest of the SID address space.
Regards
Corentin Labbe
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3
2016-10-19 7:40 ` LABBE Corentin
@ 2016-10-20 20:36 ` Maxime Ripard
2016-10-23 8:26 ` LABBE Corentin
0 siblings, 1 reply; 6+ messages in thread
From: Maxime Ripard @ 2016-10-20 20:36 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Oct 19, 2016 at 09:40:16AM +0200, LABBE Corentin wrote:
> On Wed, Oct 05, 2016 at 12:21:30PM +0200, Jean-Francois Moine wrote:
> > On Wed, 5 Oct 2016 11:48:24 +0200
> > Corentin Labbe <clabbe.montjoie@gmail.com> wrote:
> >
> > > This patch add support for the sunxi-sid driver to the device tree for sun8i-h3.
> > >
> > > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > > ---
> > > arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++
> > > 1 file changed, 5 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> > > index 9f58bb4..abfd29c 100644
> > > --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> > > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> > > @@ -211,6 +211,11 @@
> > > #size-cells = <0>;
> > > };
> > >
> > > + sid: eeprom at 01c14200 {
> > > + compatible = "allwinner,sun7i-a20-sid";
> > > + reg = <0x01c14200 0x200>;
> >
> > The datasheet says 1Kb starting at 0x01c14000.
> > Is there any reason to reduce the area and to shift the offset?
> >
>
> According to http://linux-sunxi.org/SID_Register_Guide "For
> Allwinner A83T and H3 the SID address space starts at 0x01c14000,
> and the e-fuses are at offset 0x200".
>
> So I use this offset, since the sunxi_sid driver need the base
> address of e-fuses.
>
> The easiest solution is to use 0x01c14200 since the other part of
> sid is not used and not known (A83T/H3 user manual doesnt give any
> information on all sid space, worse for A64 which reference SID only
> in memory map).
>
> So probably for H3/A64/A83T, there will never any usage of the rest
> of the SID address space.
And since we can't know that, and we have to maintain the DT ABI,
using the whole address map and an offset, with a new compatible, is
definetely the safest thing to do.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161020/dec6def5/attachment.sig>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3
2016-10-20 20:36 ` Maxime Ripard
@ 2016-10-23 8:26 ` LABBE Corentin
2016-10-24 14:05 ` Maxime Ripard
0 siblings, 1 reply; 6+ messages in thread
From: LABBE Corentin @ 2016-10-23 8:26 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Oct 20, 2016 at 10:36:54PM +0200, Maxime Ripard wrote:
> On Wed, Oct 19, 2016 at 09:40:16AM +0200, LABBE Corentin wrote:
> > On Wed, Oct 05, 2016 at 12:21:30PM +0200, Jean-Francois Moine wrote:
> > > On Wed, 5 Oct 2016 11:48:24 +0200
> > > Corentin Labbe <clabbe.montjoie@gmail.com> wrote:
> > >
> > > > This patch add support for the sunxi-sid driver to the device tree for sun8i-h3.
> > > >
> > > > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > > > ---
> > > > arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++
> > > > 1 file changed, 5 insertions(+)
> > > >
> > > > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> > > > index 9f58bb4..abfd29c 100644
> > > > --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> > > > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> > > > @@ -211,6 +211,11 @@
> > > > #size-cells = <0>;
> > > > };
> > > >
> > > > + sid: eeprom at 01c14200 {
> > > > + compatible = "allwinner,sun7i-a20-sid";
> > > > + reg = <0x01c14200 0x200>;
> > >
> > > The datasheet says 1Kb starting at 0x01c14000.
> > > Is there any reason to reduce the area and to shift the offset?
> > >
> >
> > According to http://linux-sunxi.org/SID_Register_Guide "For
> > Allwinner A83T and H3 the SID address space starts at 0x01c14000,
> > and the e-fuses are at offset 0x200".
> >
> > So I use this offset, since the sunxi_sid driver need the base
> > address of e-fuses.
> >
> > The easiest solution is to use 0x01c14200 since the other part of
> > sid is not used and not known (A83T/H3 user manual doesnt give any
> > information on all sid space, worse for A64 which reference SID only
> > in memory map).
> >
> > So probably for H3/A64/A83T, there will never any usage of the rest
> > of the SID address space.
>
> And since we can't know that, and we have to maintain the DT ABI,
> using the whole address map and an offset, with a new compatible, is
> definetely the safest thing to do.
>
I have two way of doing it, which one do you prefer ?
- Adding two optionnal properties: efuses-offset and efuses-size defaulting to 0 and resourcesize.
- Adding a subnode called efuses with its own reg=<>
The first one is easy and didnt need any work on previous DT entries.
Regards
Corentin Labbe
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3
2016-10-23 8:26 ` LABBE Corentin
@ 2016-10-24 14:05 ` Maxime Ripard
0 siblings, 0 replies; 6+ messages in thread
From: Maxime Ripard @ 2016-10-24 14:05 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Oct 23, 2016 at 10:26:31AM +0200, LABBE Corentin wrote:
> On Thu, Oct 20, 2016 at 10:36:54PM +0200, Maxime Ripard wrote:
> > On Wed, Oct 19, 2016 at 09:40:16AM +0200, LABBE Corentin wrote:
> > > On Wed, Oct 05, 2016 at 12:21:30PM +0200, Jean-Francois Moine wrote:
> > > > On Wed, 5 Oct 2016 11:48:24 +0200
> > > > Corentin Labbe <clabbe.montjoie@gmail.com> wrote:
> > > >
> > > > > This patch add support for the sunxi-sid driver to the device tree for sun8i-h3.
> > > > >
> > > > > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > > > > ---
> > > > > arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++
> > > > > 1 file changed, 5 insertions(+)
> > > > >
> > > > > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> > > > > index 9f58bb4..abfd29c 100644
> > > > > --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> > > > > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> > > > > @@ -211,6 +211,11 @@
> > > > > #size-cells = <0>;
> > > > > };
> > > > >
> > > > > + sid: eeprom at 01c14200 {
> > > > > + compatible = "allwinner,sun7i-a20-sid";
> > > > > + reg = <0x01c14200 0x200>;
> > > >
> > > > The datasheet says 1Kb starting at 0x01c14000.
> > > > Is there any reason to reduce the area and to shift the offset?
> > > >
> > >
> > > According to http://linux-sunxi.org/SID_Register_Guide "For
> > > Allwinner A83T and H3 the SID address space starts at 0x01c14000,
> > > and the e-fuses are at offset 0x200".
> > >
> > > So I use this offset, since the sunxi_sid driver need the base
> > > address of e-fuses.
> > >
> > > The easiest solution is to use 0x01c14200 since the other part of
> > > sid is not used and not known (A83T/H3 user manual doesnt give any
> > > information on all sid space, worse for A64 which reference SID only
> > > in memory map).
> > >
> > > So probably for H3/A64/A83T, there will never any usage of the rest
> > > of the SID address space.
> >
> > And since we can't know that, and we have to maintain the DT ABI,
> > using the whole address map and an offset, with a new compatible, is
> > definetely the safest thing to do.
> >
>
> I have two way of doing it, which one do you prefer ?
>
> - Adding two optionnal properties: efuses-offset and efuses-size defaulting to 0 and resourcesize.
> - Adding a subnode called efuses with its own reg=<>
>
> The first one is easy and didnt need any work on previous DT entries.
I'd prefer to have a compatible, and the size and/or offset of the
efuses associated to it.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161024/d93d1bab/attachment-0001.sig>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-10-24 14:05 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-10-05 9:48 [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3 Corentin Labbe
2016-10-05 10:21 ` Jean-Francois Moine
2016-10-19 7:40 ` LABBE Corentin
2016-10-20 20:36 ` Maxime Ripard
2016-10-23 8:26 ` LABBE Corentin
2016-10-24 14:05 ` Maxime Ripard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).