From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
Date: Wed, 2 Nov 2016 15:35:37 +0800 [thread overview]
Message-ID: <20161102073533.GA19126@dragon> (raw)
In-Reply-To: <CAAMH-yugLeHjaSwMx9ZoJ9qm44VKXcgO64xdsO=HBj59pj5cUA@mail.gmail.com>
On Tue, Nov 01, 2016 at 03:54:31PM +0100, Gary Bisson wrote:
> Hi Shawn,
>
> On Tue, Nov 1, 2016 at 3:13 PM, Shawn Guo <shawnguo@kernel.org> wrote:
> > On Tue, Oct 25, 2016 at 11:19:51PM +0200, Gary Bisson wrote:
> >> SoM based on i.MX6 Quad with 1GB of DDR3.
> >>
> >> https://boundarydevices.com/product/nit6x-som-v2/
> >>
> >> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
> >> ---
> >> arch/arm/boot/dts/Makefile | 1 +
> >> arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++
> >> arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
> >> 3 files changed, 824 insertions(+)
> >> create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
> >> create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
> >
> > <snip>
> >
> >> +/ {
> >> + chosen {
> >> + stdout-path = &uart2;
> >> + };
> >> +
> >> + memory {
> >> + reg = <0x10000000 0x40000000>;
> >> + };
> >> +
> >> + backlight_lcd: backlight_lcd {
> >
> > Please use hyphen instead of underscore in node name. Please check
> > through the patch series.
>
> Sorry about that, forgot (again). Just to make sure, the label can
> have underscore but not the name right? Or is it better to have hypens
> everywhere?
Hyphen cannot be used in labels. Otherwise, DTC will complain.
> So I guess I need to make a pass on current boards as well.
I'm fine with the current boards and only expect it to be right with the
boards to be added.
Shawn
next prev parent reply other threads:[~2016-11-02 7:35 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-25 21:19 [PATCH 0/5] ARM: dts: imx: update Boundary Devices boards support Gary Bisson
2016-10-25 21:19 ` [PATCH 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support Gary Bisson
2016-11-01 14:13 ` Shawn Guo
2016-11-01 14:54 ` Gary Bisson
2016-11-02 7:35 ` Shawn Guo [this message]
2016-10-25 21:19 ` [PATCH 2/5] ARM: dts: imx6qdl-sabrelite: rename panel nodes Gary Bisson
2016-10-25 21:19 ` [PATCH 3/5] ARM: dts: imx6qdl-sabrelite: add missing USB PHY reset control Gary Bisson
2016-10-25 21:28 ` Fabio Estevam
2016-10-25 21:53 ` Gary Bisson
2016-11-01 14:17 ` Shawn Guo
2016-10-25 21:19 ` [PATCH 4/5] ARM: dts: imx6qdl-nitrogen6x: rename panel nodes Gary Bisson
2016-10-25 21:19 ` [PATCH 5/5] ARM: dts: imx6qdl-nitrogen6x: add missing USB PHY reset control Gary Bisson
2016-11-01 17:10 ` [PATCH v2 0/5] ARM: dts: imx: update Boundary Devices boards support Gary Bisson
2016-11-01 17:10 ` [PATCH v2 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support Gary Bisson
2016-11-01 17:10 ` [PATCH v2 2/5] ARM: dts: imx6qdl-sabrelite: use hyphens for nodes name Gary Bisson
2016-11-01 17:10 ` [PATCH v2 3/5] ARM: dts: imx6qdl-nitrogen6x: " Gary Bisson
2016-11-01 17:10 ` [PATCH v2 4/5] ARM: dts: imx6qdl-nit6xlite: " Gary Bisson
2016-11-01 17:10 ` [PATCH v2 5/5] ARM: dts: imx6qdl-nitrogen6_max: " Gary Bisson
2016-11-02 7:40 ` [PATCH v2 0/5] ARM: dts: imx: update Boundary Devices boards support Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161102073533.GA19126@dragon \
--to=shawnguo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).