From mboxrd@z Thu Jan  1 00:00:00 1970
From: lee.jones@linaro.org (Lee Jones)
Date: Thu, 3 Nov 2016 14:39:23 +0000
Subject: [PATCHv3 1/4] dt-bindings: mfd: Add Altera Arria10 SR Monitor
In-Reply-To: <1478097178-24341-2-git-send-email-tthayer@opensource.altera.com>
References: <1478097178-24341-1-git-send-email-tthayer@opensource.altera.com>
 <1478097178-24341-2-git-send-email-tthayer@opensource.altera.com>
Message-ID: <20161103143923.GZ13127@dell>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Wed, 02 Nov 2016, tthayer at opensource.altera.com wrote:

> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> Add the Arria10 DevKit System Resource Chip register and state
> monitoring module to the MFD.
> 
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---
> Note: This needs to be applied to the bindings document that
> was Acked & Applied but didn't reach the for-next branch.
> See https://patchwork.ozlabs.org/patch/629397/
> ---
> v2  Change compatible string -mon to -monitor for clarity
> v3  Replace node name a10sr_monitor with just monitor.
>     Replace node name a10sr_gpio with just gpio.
> ---
>  Documentation/devicetree/bindings/mfd/altera-a10sr.txt | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
> index ea151f2..69243d2 100644
> --- a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
> +++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
> @@ -17,7 +17,8 @@ The A10SR consists of these sub-devices:
>  
>  Device                   Description
>  ------                   ----------
> -a10sr_gpio               GPIO Controller
> +gpio                     GPIO Controller
> +monitor                  Register and State Monitoring
>  
>  Arria10 GPIO
>  Required Properties:
> @@ -27,6 +28,10 @@ Required Properties:
>                        the second cell is used to specify flags.
>                        See ../gpio/gpio.txt for more information.
>  
> +Arria10 Register and State Monitor
> +Required Properties:
> +- compatible        : Should be "altr,a10sr-monitor"
> +
>  Example:
>  
>          resource-manager at 0 {
> @@ -43,4 +48,8 @@ Example:
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
> +
> +		monitor {
> +			compatible = "altr,a10sr-monitor";
> +		};
>  	};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog