From mboxrd@z Thu Jan 1 00:00:00 1970 From: icenowy@aosc.xyz (Icenowy Zheng) Date: Sat, 5 Nov 2016 22:38:30 +0800 Subject: [PATCH 2/2] arm64: dts: sunxi: enable EHCI1, OHCI1 and USB PHY nodes in Pine64 In-Reply-To: <20161105143830.10099-1-icenowy@aosc.xyz> References: <20161105143830.10099-1-icenowy@aosc.xyz> Message-ID: <20161105143830.10099-2-icenowy@aosc.xyz> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Pine64 have two USB Type-A ports, which are wired to the two ports of A64 USB PHY, and the lower port is the EHCI/OHCI1 port. Enable the necessary nodes to enable the lower USB port to work. Signed-off-by: Icenowy Zheng --- arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index 4709590..d836995 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -72,3 +72,15 @@ &i2c1_pins { bias-pull-up; }; + +&usbphy { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; -- 2.10.1