From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Sun, 6 Nov 2016 19:54:26 +0100 Subject: [PATCH 2/2] arm64: dts: sunxi: enable EHCI1, OHCI1 and USB PHY nodes in Pine64 In-Reply-To: <20161105143830.10099-2-icenowy@aosc.xyz> References: <20161105143830.10099-1-icenowy@aosc.xyz> <20161105143830.10099-2-icenowy@aosc.xyz> Message-ID: <20161106185426.gcucyzjcw4zqwizz@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On Sat, Nov 05, 2016 at 10:38:30PM +0800, Icenowy Zheng wrote: > Pine64 have two USB Type-A ports, which are wired to the two ports of > A64 USB PHY, and the lower port is the EHCI/OHCI1 port. > > Enable the necessary nodes to enable the lower USB port to work. > > Signed-off-by: Icenowy Zheng > --- > arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts > index 4709590..d836995 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts > @@ -72,3 +72,15 @@ > &i2c1_pins { > bias-pull-up; > }; > + > +&usbphy { > + status = "okay"; > +}; > + > +&ehci1 { > + status = "okay"; > +}; > + > +&ohci1 { > + status = "okay"; > +}; Please order the nodes by alphebetical order. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: