* [PATCH 1/2] ARM: dts: imx6sx-sdb: update TX D_CAL for USBPHY
@ 2016-10-31 2:58 Peter Chen
2016-10-31 2:58 ` [PATCH 2/2] ARM: dts: imx6ul-14x14-evk: " Peter Chen
2016-11-05 8:31 ` [PATCH 1/2] ARM: dts: imx6sx-sdb: " Shawn Guo
0 siblings, 2 replies; 5+ messages in thread
From: Peter Chen @ 2016-10-31 2:58 UTC (permalink / raw)
To: linux-arm-kernel
We need to change trimming value (as a percentage) of the 17.78mA TX
reference current for better signal quality. With this change, we
can patch the eye-diagram test on this board.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
arch/arm/boot/dts/imx6sx-sdb.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index 85f56a5..4933c56 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -317,6 +317,14 @@
status = "okay";
};
+&usbphy1 {
+ fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+ fsl,tx-d-cal = <106>;
+};
+
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 2/2] ARM: dts: imx6ul-14x14-evk: update TX D_CAL for USBPHY
2016-10-31 2:58 [PATCH 1/2] ARM: dts: imx6sx-sdb: update TX D_CAL for USBPHY Peter Chen
@ 2016-10-31 2:58 ` Peter Chen
2016-11-05 8:31 ` [PATCH 1/2] ARM: dts: imx6sx-sdb: " Shawn Guo
1 sibling, 0 replies; 5+ messages in thread
From: Peter Chen @ 2016-10-31 2:58 UTC (permalink / raw)
To: linux-arm-kernel
We need to change trimming value (as a percentage) of the 17.78mA TX
reference current for better signal quality. With this change, we
can patch the eye-diagram test on this board.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
arch/arm/boot/dts/imx6ul-14x14-evk.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
index 53f0cf8..1867c69 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -233,6 +233,14 @@
status = "okay";
};
+&usbphy1 {
+ fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+ fsl,tx-d-cal = <106>;
+};
+
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 1/2] ARM: dts: imx6sx-sdb: update TX D_CAL for USBPHY
2016-10-31 2:58 [PATCH 1/2] ARM: dts: imx6sx-sdb: update TX D_CAL for USBPHY Peter Chen
2016-10-31 2:58 ` [PATCH 2/2] ARM: dts: imx6ul-14x14-evk: " Peter Chen
@ 2016-11-05 8:31 ` Shawn Guo
2016-11-07 1:32 ` Peter Chen
1 sibling, 1 reply; 5+ messages in thread
From: Shawn Guo @ 2016-11-05 8:31 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Oct 31, 2016 at 10:58:28AM +0800, Peter Chen wrote:
> We need to change trimming value (as a percentage) of the 17.78mA TX
> reference current for better signal quality. With this change, we
> can patch the eye-diagram test on this board.
s/patch/pass? I just want to confirm this is a typo, and can fix it up
when applying.
Shawn
>
> Signed-off-by: Peter Chen <peter.chen@nxp.com>
> ---
> arch/arm/boot/dts/imx6sx-sdb.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
> index 85f56a5..4933c56 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
> +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
> @@ -317,6 +317,14 @@
> status = "okay";
> };
>
> +&usbphy1 {
> + fsl,tx-d-cal = <106>;
> +};
> +
> +&usbphy2 {
> + fsl,tx-d-cal = <106>;
> +};
> +
> &usdhc2 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usdhc2>;
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH 1/2] ARM: dts: imx6sx-sdb: update TX D_CAL for USBPHY
2016-11-05 8:31 ` [PATCH 1/2] ARM: dts: imx6sx-sdb: " Shawn Guo
@ 2016-11-07 1:32 ` Peter Chen
2016-11-07 2:06 ` Shawn Guo
0 siblings, 1 reply; 5+ messages in thread
From: Peter Chen @ 2016-11-07 1:32 UTC (permalink / raw)
To: linux-arm-kernel
>On Mon, Oct 31, 2016 at 10:58:28AM +0800, Peter Chen wrote:
>> We need to change trimming value (as a percentage) of the 17.78mA TX
>> reference current for better signal quality. With this change, we can
>> patch the eye-diagram test on this board.
>
>s/patch/pass? I just want to confirm this is a typo, and can fix it up when applying.
>
Thanks, Shawn. It is a typo. Help me to change both of patches please.
Peter
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] ARM: dts: imx6sx-sdb: update TX D_CAL for USBPHY
2016-11-07 1:32 ` Peter Chen
@ 2016-11-07 2:06 ` Shawn Guo
0 siblings, 0 replies; 5+ messages in thread
From: Shawn Guo @ 2016-11-07 2:06 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Nov 07, 2016 at 01:32:29AM +0000, Peter Chen wrote:
>
> >On Mon, Oct 31, 2016 at 10:58:28AM +0800, Peter Chen wrote:
> >> We need to change trimming value (as a percentage) of the 17.78mA TX
> >> reference current for better signal quality. With this change, we can
> >> patch the eye-diagram test on this board.
> >
> >s/patch/pass? I just want to confirm this is a typo, and can fix it up when applying.
> >
>
> Thanks, Shawn. It is a typo. Help me to change both of patches please.
Applied both, thanks.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-11-07 2:06 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-10-31 2:58 [PATCH 1/2] ARM: dts: imx6sx-sdb: update TX D_CAL for USBPHY Peter Chen
2016-10-31 2:58 ` [PATCH 2/2] ARM: dts: imx6ul-14x14-evk: " Peter Chen
2016-11-05 8:31 ` [PATCH 1/2] ARM: dts: imx6sx-sdb: " Shawn Guo
2016-11-07 1:32 ` Peter Chen
2016-11-07 2:06 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).