From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux@armlinux.org.uk (Russell King - ARM Linux) Date: Tue, 8 Nov 2016 16:13:31 +0000 Subject: [PATCH 0/8] firmware: arm_scpi: add support for legacy SCPI protocol In-Reply-To: References: <1478148731-11712-1-git-send-email-sudeep.holla@arm.com> <20161108145118.GR1041@n2100.armlinux.org.uk> <28decdc3-6b86-924f-d3c1-9873a8cfce77@arm.com> <20161108154038.GS1041@n2100.armlinux.org.uk> Message-ID: <20161108161331.GV1041@n2100.armlinux.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Nov 08, 2016 at 04:08:38PM +0000, Sudeep Holla wrote: > I will focus on this and see what's happening. I have issue with network > on my setup with debug build and Linaro guys are not seeing it. I revert > to release build of UEFI for that. Anyways one suggestion I have right > now is to erase the second partition of NOR flash where the old UEFI > config is placed and it could be conflicting with the new UEFI image. > > Cmd> flash > > > Switching on main power... > PMIC RAM configuration (pms_v105.bin)... > IOFPGA config: PASSED > Enabling usb remote... > > > Flash> ERASERANGE 0x0BFC0000 0x0BFF0000 > > I will looking into that further. Still behaves the same, stopping at: FV2 Hob 0xFE07B000 - 0xFE8253BF -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net.