From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] spi: atmel: use managed resource for gpio chip select
Date: Tue, 8 Nov 2016 18:48:52 +0100 [thread overview]
Message-ID: <20161108174852.14311-1-nicolas.ferre@atmel.com> (raw)
Use the managed gpio CS pin request so that we avoid having trouble
in the cleanup code.
In fact, if module was configured with DT, cleanup code released
invalid pin. Since resource wasn't freed, module cannot be reinserted.
This require to extract the gpio request call from the "setup" function
and call it in the appropriate probe function.
Reported-by: Alexander Morozov <linux@meltdown.ru>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
v2: fix devm_gpio_request location: the setup code for device was not proper
location. Move it to the probe function and add needed DT routines to
handle all CS gpio specified.
drivers/spi/spi-atmel.c | 50 ++++++++++++++++++++++++++++++++++++++-----------
1 file changed, 39 insertions(+), 11 deletions(-)
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 32683a13dd60..a60925614480 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -24,6 +24,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pm_runtime.h>
@@ -1204,7 +1205,6 @@ static int atmel_spi_setup(struct spi_device *spi)
u32 csr;
unsigned int bits = spi->bits_per_word;
unsigned int npcs_pin;
- int ret;
as = spi_master_get_devdata(spi->master);
@@ -1247,16 +1247,9 @@ static int atmel_spi_setup(struct spi_device *spi)
if (!asd)
return -ENOMEM;
- if (as->use_cs_gpios) {
- ret = gpio_request(npcs_pin, dev_name(&spi->dev));
- if (ret) {
- kfree(asd);
- return ret;
- }
-
+ if (as->use_cs_gpios)
gpio_direction_output(npcs_pin,
!(spi->mode & SPI_CS_HIGH));
- }
asd->npcs_pin = npcs_pin;
spi->controller_state = asd;
@@ -1471,13 +1464,11 @@ static int atmel_spi_transfer_one_message(struct spi_master *master,
static void atmel_spi_cleanup(struct spi_device *spi)
{
struct atmel_spi_device *asd = spi->controller_state;
- unsigned gpio = (unsigned long) spi->controller_data;
if (!asd)
return;
spi->controller_state = NULL;
- gpio_free(gpio);
kfree(asd);
}
@@ -1499,6 +1490,39 @@ static void atmel_get_caps(struct atmel_spi *as)
}
/*-------------------------------------------------------------------------*/
+static int atmel_spi_gpio_cs(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct atmel_spi *as = spi_master_get_devdata(master);
+ struct device_node *np = master->dev.of_node;
+ int i;
+ int ret = 0;
+ int nb = 0;
+
+ if (!as->use_cs_gpios)
+ return 0;
+
+ if (!np)
+ return 0;
+
+ nb = of_gpio_named_count(np, "cs-gpios");
+ for (i = 0; i < nb; i++) {
+ int cs_gpio = of_get_named_gpio(pdev->dev.of_node,
+ "cs-gpios", i);
+
+ if (cs_gpio == -EPROBE_DEFER)
+ return cs_gpio;
+
+ if (gpio_is_valid(cs_gpio)) {
+ ret = devm_gpio_request(&pdev->dev, cs_gpio,
+ dev_name(&pdev->dev));
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
static int atmel_spi_probe(struct platform_device *pdev)
{
@@ -1577,6 +1601,10 @@ static int atmel_spi_probe(struct platform_device *pdev)
master->num_chipselect = 4;
}
+ ret = atmel_spi_gpio_cs(pdev);
+ if (ret)
+ goto out_unmap_regs;
+
as->use_dma = false;
as->use_pdc = false;
if (as->caps.has_dma_support) {
--
2.9.0
next reply other threads:[~2016-11-08 17:48 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-08 17:48 Nicolas Ferre [this message]
2016-11-08 17:49 ` [PATCH v2] spi: atmel: use managed resource for gpio chip select Alexandre Belloni
2016-11-09 9:16 ` Nicolas Ferre
2016-11-09 9:34 ` Alexandre Belloni
2016-11-09 15:00 ` Applied "spi: atmel: use managed resource for gpio chip select" to the spi tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161108174852.14311-1-nicolas.ferre@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox