From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/14] ARM: dts: armada-375: Add node labels
Date: Thu, 10 Nov 2016 01:09:47 +0100 [thread overview]
Message-ID: <20161110001000.10619-2-gregory.clement@free-electrons.com> (raw)
In-Reply-To: <20161110001000.10619-1-gregory.clement@free-electrons.com>
As it was previously done for kirkwood and for aramda 370/XP, this adds
missing node labels to Armada 375 and SoC specific nodes to allow to
reference them more easily.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-375.dtsi | 62 +++++++++++++++++++--------------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 45fa92f9cf5c..e016ff3ed970 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -84,12 +84,12 @@
#size-cells = <0>;
enable-method = "marvell,armada-375-smp";
- cpu at 0 {
+ cpu0: cpu at 0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
- cpu at 1 {
+ cpu1: cpu at 1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
@@ -115,7 +115,7 @@
reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
};
- devbus-bootcs {
+ devbus_bootcs: devbus-bootcs {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -125,7 +125,7 @@
status = "disabled";
};
- devbus-cs0 {
+ devbus_cs0: devbus-cs0 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -135,7 +135,7 @@
status = "disabled";
};
- devbus-cs1 {
+ devbus_cs1: devbus-cs1 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -145,7 +145,7 @@
status = "disabled";
};
- devbus-cs2 {
+ devbus_cs2: devbus-cs2 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -155,7 +155,7 @@
status = "disabled";
};
- devbus-cs3 {
+ devbus_cs3: devbus-cs3 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -182,12 +182,12 @@
prefetch-data = <1>;
};
- scu at c000 {
+ scu: scu at c000 {
compatible = "arm,cortex-a9-scu";
reg = <0xc000 0x58>;
};
- timer at c600 {
+ timer0: timer at c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xc600 0x20>;
interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
@@ -203,7 +203,7 @@
<0xc100 0x100>;
};
- mdio {
+ mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
@@ -212,7 +212,7 @@
};
/* Network controller */
- ethernet at f0000 {
+ ethernet: ethernet at f0000 {
compatible = "marvell,armada-375-pp2";
reg = <0xf0000 0xa000>, /* Packet Processor regs */
<0xc0000 0x3060>, /* LMS regs */
@@ -235,7 +235,7 @@
};
};
- rtc at 10300 {
+ rtc: rtc at 10300 {
compatible = "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -307,7 +307,7 @@
status = "disabled";
};
- pinctrl {
+ pinctrl: pinctrl {
compatible = "marvell,mv88f6720-pinctrl";
reg = <0x18000 0x24>;
@@ -382,7 +382,7 @@
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
};
- system-controller at 18200 {
+ systemc: system-controller at 18200 {
compatible = "marvell,armada-375-system-controller";
reg = <0x18200 0x100>;
};
@@ -415,7 +415,7 @@
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
- timer at 20300 {
+ timer1: timer at 20300 {
compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
reg = <0x20300 0x30>, <0x21040 0x30>;
interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
@@ -428,24 +428,24 @@
clock-names = "nbclk", "fixed";
};
- watchdog at 20300 {
+ watchdog: watchdog at 20300 {
compatible = "marvell,armada-375-wdt";
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
clocks = <&coreclk 0>, <&refclk>;
clock-names = "nbclk", "fixed";
};
- cpurst at 20800 {
+ cpurst: cpurst at 20800 {
compatible = "marvell,armada-370-cpu-reset";
reg = <0x20800 0x10>;
};
- coherency-fabric at 21010 {
+ coherencyfab: coherency-fabric at 21010 {
compatible = "marvell,armada-375-coherency-fabric";
reg = <0x21010 0x1c>;
};
- usb at 50000 {
+ usb0: usb at 50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x500>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
@@ -455,7 +455,7 @@
status = "disabled";
};
- usb at 54000 {
+ usb1: usb at 54000 {
compatible = "marvell,orion-ehci";
reg = <0x54000 0x500>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -463,7 +463,7 @@
status = "disabled";
};
- usb3 at 58000 {
+ usb2: usb3 at 58000 {
compatible = "marvell,armada-375-xhci";
reg = <0x58000 0x20000>,<0x5b880 0x80>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
@@ -473,7 +473,7 @@
status = "disabled";
};
- xor at 60800 {
+ xor0: xor at 60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
0x60A00 0x100>;
@@ -493,7 +493,7 @@
};
};
- xor at 60900 {
+ xor1: xor at 60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
@@ -513,7 +513,7 @@
};
};
- crypto at 90000 {
+ cesa: crypto at 90000 {
compatible = "marvell,armada-375-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
@@ -528,7 +528,7 @@
marvell,crypto-sram-size = <0x800>;
};
- sata at a0000 {
+ sata: sata at a0000 {
compatible = "marvell,armada-370-sata";
reg = <0xa0000 0x5000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -537,7 +537,7 @@
status = "disabled";
};
- nand at d0000 {
+ nand: nand at d0000 {
compatible = "marvell,armada370-nand";
reg = <0xd0000 0x54>;
#address-cells = <1>;
@@ -547,7 +547,7 @@
status = "disabled";
};
- mvsdio at d4000 {
+ sdio: mvsdio at d4000 {
compatible = "marvell,orion-sdio";
reg = <0xd4000 0x200>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -559,7 +559,7 @@
status = "disabled";
};
- thermal at e8078 {
+ thermal: thermal at e8078 {
compatible = "marvell,armada375-thermal";
reg = <0xe8078 0x4>, <0xe807c 0x8>;
status = "okay";
@@ -580,7 +580,7 @@
};
};
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
@@ -599,7 +599,7 @@
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO */>;
- pcie at 1,0 {
+ pcie0: pcie at 1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -616,7 +616,7 @@
status = "disabled";
};
- pcie at 2,0 {
+ pcie1: pcie at 2,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
--
2.10.1
next prev parent reply other threads:[~2016-11-10 0:09 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-10 0:09 [PATCH 00/14] Various Armada 375 DT warning fixup Gregory CLEMENT
2016-11-10 0:09 ` Gregory CLEMENT [this message]
2016-11-10 0:09 ` [PATCH 02/14] ARM: dts: armada-375: Use the node labels Gregory CLEMENT
2016-11-10 0:09 ` [PATCH 03/14] ARM: dts: armada-375: Fixup mdio DT warning Gregory CLEMENT
2016-11-10 0:09 ` [PATCH 04/14] ARM: dts: armada-375: Fixup bootrom " Gregory CLEMENT
2016-11-10 8:22 ` Thomas Petazzoni
2016-11-10 9:36 ` Gregory CLEMENT
2016-11-10 10:15 ` Thomas Petazzoni
2016-11-10 10:43 ` Gregory CLEMENT
2016-11-10 0:09 ` [PATCH 05/14] ARM: dts: armada-375: Fixup devbus " Gregory CLEMENT
2016-11-10 0:09 ` [PATCH 06/14] ARM: dts: armada-375: Fixup sa-ram " Gregory CLEMENT
2016-11-10 0:09 ` [PATCH 07/14] ARM: dts: armada-375: Fixup pcie DT warnings Gregory CLEMENT
2016-11-10 0:09 ` [PATCH 08/14] " Gregory CLEMENT
2016-11-10 0:22 ` Gregory CLEMENT
2016-11-10 0:09 ` [PATCH 09/14] ARM: dts: armada-375: Fixup pinctrl " Gregory CLEMENT
2016-11-10 0:09 ` [PATCH 10/14] ARM: dts: armada-375: Fixup soc DT warning Gregory CLEMENT
2016-11-10 0:09 ` [PATCH 11/14] ARM: dts: armada-375: Fixup internal-regs " Gregory CLEMENT
2016-11-10 0:09 ` [PATCH 12/14] ARM: dts: armada-375: Remove skeleton.dtsi Gregory CLEMENT
2016-11-10 0:09 ` [PATCH 13/14] ARM: dts: armada-375: Fixup memory DT warning Gregory CLEMENT
2016-11-10 0:10 ` [PATCH 14/14] ARM: dts: armada-375: Fixup ethernet child " Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161110001000.10619-2-gregory.clement@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox