[PATCH] ARM: dts: socfpga: add nand controller nodes

[s.trumtrar@pengutronix.de (Steffen Trumtrar)]

On Wed, Nov 09, 2016 at 12:48:21PM -0600, Dinh Nguyen wrote:
> 
> 
> On 11/09/2016 01:35 AM, Steffen Trumtrar wrote:
> > Add the denali nand controller to the socfpga dtsi.
> > 
> > Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> > ---
> >  arch/arm/boot/dts/socfpga.dtsi | 13 +++++++++++++
> >  1 file changed, 13 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
> > index 9f48141270b8..6b0c23ca5e88 100644
> > --- a/arch/arm/boot/dts/socfpga.dtsi
> > +++ b/arch/arm/boot/dts/socfpga.dtsi
> > @@ -700,6 +700,19 @@
> >  			status = "disabled";
> >  		};
> >  
> > +		nand0: nand at ff900000 {
> > +			#address-cells = <0x1>;
> > +			#size-cells = <0x1>;
> > +			compatible = "denali,denali-nand-dt";
> > +			reg = <0xff900000 0x100000>,
> > +			      <0xffb80000 0x10000>;
> > +			reg-names = "nand_data", "denali_reg";
> > +			interrupts = <0x0 0x90 0x4>;
> > +			dma-mask = <0xffffffff>;
> > +			clocks = <&nand_clk>;
> > +			status = "disabled";
> > +		};
> > +
> >  		ocram: sram at ffff0000 {
> >  			compatible = "mmio-sram";
> >  			reg = <0xffff0000 0x10000>;
> > 
> 
> Since there's only 1 NAND node, do we need to call the node "nand0"? No
> need to resend a patch, I can change it locally if we agree that the
> node should be just:
> 
> nand: nand at ff900000
> 

Okay with me. Go ahead.

Thanks,
Steffen

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |