From mboxrd@z Thu Jan 1 00:00:00 1970 From: tony@atomide.com (Tony Lindgren) Date: Fri, 11 Nov 2016 11:17:03 -0800 Subject: [PATCH 06/14] ARM: OMAP2+: Remove legacy muxing for usb-tusb6010.c In-Reply-To: <20161111191711.5079-1-tony@atomide.com> References: <20161111191711.5079-1-tony@atomide.com> Message-ID: <20161111191711.5079-7-tony@atomide.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org We are moving to device tree based booting, and this should be done using pinctrl-single instead. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/usb-tusb6010.c | 21 --------------------- 1 file changed, 21 deletions(-) diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -22,8 +22,6 @@ #include "gpmc.h" -#include "mux.h" - static u8 async_cs, sync_cs; static unsigned refclk_psec; @@ -226,25 +224,6 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, } tusb_device.dev.platform_data = data; - /* REVISIT let the driver know what DMA channels work */ - if (!dmachan) - tusb_device.dev.dma_mask = NULL; - else { - /* assume OMAP 2420 ES2.0 and later */ - if (dmachan & (1 << 0)) - omap_mux_init_signal("sys_ndmareq0", 0); - if (dmachan & (1 << 1)) - omap_mux_init_signal("sys_ndmareq1", 0); - if (dmachan & (1 << 2)) - omap_mux_init_signal("sys_ndmareq2", 0); - if (dmachan & (1 << 3)) - omap_mux_init_signal("sys_ndmareq3", 0); - if (dmachan & (1 << 4)) - omap_mux_init_signal("sys_ndmareq4", 0); - if (dmachan & (1 << 5)) - omap_mux_init_signal("sys_ndmareq5", 0); - } - /* so far so good ... register the device */ status = platform_device_register(&tusb_device); if (status < 0) { -- 2.10.2