* [PATCH 00/14] Drop some unused omap platform_data
@ 2016-11-11 19:16 Tony Lindgren
2016-11-11 19:16 ` [PATCH 01/14] ARM: OMAP2+: Remove legacy serial.c Tony Lindgren
` (12 more replies)
0 siblings, 13 replies; 18+ messages in thread
From: Tony Lindgren @ 2016-11-11 19:16 UTC (permalink / raw)
To: linux-arm-kernel
Hi all,
I've rebased the earlier legacy platform data removal
patches from few years ago that I've kept stashed in the
omap-for-v3.14/omap3-board-removal branch until omap3
became device tree only.
Looks like we still have hwmod data at least for omap4
that is not yet populated in the dts files. I'll fix
that up later on.
Meanwhile, if you notice some other unused platform_data
related code in mach-omap2, please send patches. I'll
be queueing them into omap-for-v4.10/legacy branch.
Regards,
Tony
Javier Martinez Canillas (2):
ARM: OMAP2+: Remove legacy smsc911x and smc91x GPMC support
ARM: OMAP2+: Remove legacy board-flash.c
Tony Lindgren (12):
ARM: OMAP2+: Remove legacy serial.c
ARM: OMAP2+: Remove legacy i2c.c platform init code
ARM: OMAP2+: Remove legacy PM init
ARM: OMAP2+: Remove legacy twl4030 platform init code
ARM: OMAP2+: Remove legacy usb-host.c platform init code
ARM: OMAP2+: Remove legacy muxing for usb-tusb6010.c
ARM: OMAP2+: Remove legacy usb-musb.c platform init code
ARM: OMAP2+: Remove legacy hwmod mux code
ARM: OMAP2+: Remove legacy mux code
ARM: OMAP2+: Remove legacy data from hwmod for omap3
ARM: OMAP2+: Drop legacy ads7846 init
ARM: OMAP2+: Drop legacy sdram timings
arch/arm/mach-omap1/Kconfig | 26 +
arch/arm/mach-omap1/i2c.c | 83 +
arch/arm/mach-omap2/Makefile | 16 +-
arch/arm/mach-omap2/board-flash.c | 242 ---
arch/arm/mach-omap2/board-flash.h | 56 -
arch/arm/mach-omap2/common-board-devices.c | 102 -
arch/arm/mach-omap2/common-board-devices.h | 8 -
arch/arm/mach-omap2/common.h | 9 -
arch/arm/mach-omap2/devices.c | 1 -
arch/arm/mach-omap2/dss-common.c | 37 -
arch/arm/mach-omap2/dss-common.h | 13 -
arch/arm/mach-omap2/gpmc-smsc911x.c | 100 -
arch/arm/mach-omap2/gpmc-smsc911x.h | 35 -
arch/arm/mach-omap2/hsmmc.c | 88 -
arch/arm/mach-omap2/i2c.c | 97 -
arch/arm/mach-omap2/io.c | 1 -
arch/arm/mach-omap2/msdi.c | 1 -
arch/arm/mach-omap2/mux.c | 1153 -----------
arch/arm/mach-omap2/mux.h | 352 ----
arch/arm/mach-omap2/mux34xx.c | 2061 --------------------
arch/arm/mach-omap2/mux34xx.h | 402 ----
arch/arm/mach-omap2/omap_hwmod.c | 107 +-
.../omap_hwmod_2xxx_3xxx_interconnect_data.c | 149 +-
.../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 201 +-
.../mach-omap2/omap_hwmod_2xxx_interconnect_data.c | 4 -
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 1 -
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 787 +-------
arch/arm/mach-omap2/omap_hwmod_common_data.h | 15 -
arch/arm/mach-omap2/pdata-quirks.c | 1 -
arch/arm/mach-omap2/pm.c | 66 +-
arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h | 51 -
arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h | 55 -
arch/arm/mach-omap2/sdram-nokia.c | 299 ---
arch/arm/mach-omap2/sdram-nokia.h | 12 -
arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h | 51 -
.../mach-omap2/sdram-qimonda-hyb18m512160af-6.h | 54 -
arch/arm/mach-omap2/serial.c | 332 ----
arch/arm/mach-omap2/twl-common.c | 81 -
arch/arm/mach-omap2/twl-common.h | 42 -
arch/arm/mach-omap2/usb-host.c | 496 -----
arch/arm/mach-omap2/usb-musb.c | 106 -
arch/arm/mach-omap2/usb-tusb6010.c | 21 -
arch/arm/plat-omap/Kconfig | 26 -
arch/arm/plat-omap/Makefile | 3 -
arch/arm/plat-omap/i2c.c | 116 --
45 files changed, 160 insertions(+), 7799 deletions(-)
delete mode 100644 arch/arm/mach-omap2/board-flash.c
delete mode 100644 arch/arm/mach-omap2/board-flash.h
delete mode 100644 arch/arm/mach-omap2/common-board-devices.c
delete mode 100644 arch/arm/mach-omap2/dss-common.c
delete mode 100644 arch/arm/mach-omap2/dss-common.h
delete mode 100644 arch/arm/mach-omap2/gpmc-smsc911x.c
delete mode 100644 arch/arm/mach-omap2/gpmc-smsc911x.h
delete mode 100644 arch/arm/mach-omap2/mux.c
delete mode 100644 arch/arm/mach-omap2/mux.h
delete mode 100644 arch/arm/mach-omap2/mux34xx.c
delete mode 100644 arch/arm/mach-omap2/mux34xx.h
delete mode 100644 arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
delete mode 100644 arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
delete mode 100644 arch/arm/mach-omap2/sdram-nokia.c
delete mode 100644 arch/arm/mach-omap2/sdram-nokia.h
delete mode 100644 arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
delete mode 100644 arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
delete mode 100644 arch/arm/mach-omap2/serial.c
delete mode 100644 arch/arm/mach-omap2/twl-common.c
delete mode 100644 arch/arm/mach-omap2/twl-common.h
delete mode 100644 arch/arm/mach-omap2/usb-host.c
delete mode 100644 arch/arm/mach-omap2/usb-musb.c
delete mode 100644 arch/arm/plat-omap/i2c.c
--
2.10.2
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 01/14] ARM: OMAP2+: Remove legacy serial.c
2016-11-11 19:16 [PATCH 00/14] Drop some unused omap platform_data Tony Lindgren
@ 2016-11-11 19:16 ` Tony Lindgren
2016-11-11 19:16 ` [PATCH 02/14] ARM: OMAP2+: Remove legacy i2c.c platform init code Tony Lindgren
` (11 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2016-11-11 19:16 UTC (permalink / raw)
To: linux-arm-kernel
We can now initialize the UARTs using device tree.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/serial.c | 332 -------------------------------------------
2 files changed, 1 insertion(+), 333 deletions(-)
delete mode 100644 arch/arm/mach-omap2/serial.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -6,7 +6,7 @@ ccflags-y := -I$(srctree)/$(src)/include \
-I$(srctree)/arch/arm/plat-omap/include
# Common support
-obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
+obj-y := id.o io.o control.o mux.o devices.o fb.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
omap_device.o omap-headsmp.o sram.o drm.o
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
deleted file mode 100644
--- a/arch/arm/mach-omap2/serial.c
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * arch/arm/mach-omap2/serial.c
- *
- * OMAP2 serial support.
- *
- * Copyright (C) 2005-2008 Nokia Corporation
- * Author: Paul Mundt <paul.mundt@nokia.com>
- *
- * Major rework for PM support by Kevin Hilman
- *
- * Based off of arch/arm/mach-omap/omap1/serial.c
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/pm_runtime.h>
-#include <linux/console.h>
-#include <linux/omap-dma.h>
-#include <linux/platform_data/serial-omap.h>
-
-#include "common.h"
-#include "omap_hwmod.h"
-#include "omap_device.h"
-#include "omap-pm.h"
-#include "soc.h"
-#include "prm2xxx_3xxx.h"
-#include "pm.h"
-#include "cm2xxx_3xxx.h"
-#include "prm-regbits-34xx.h"
-#include "control.h"
-#include "mux.h"
-#include "serial.h"
-
-/*
- * NOTE: By default the serial auto_suspend timeout is disabled as it causes
- * lost characters over the serial ports. This means that the UART clocks will
- * stay on until power/autosuspend_delay is set for the uart from sysfs.
- * This also causes that any deeper omap sleep states are blocked.
- */
-#define DEFAULT_AUTOSUSPEND_DELAY -1
-
-#define MAX_UART_HWMOD_NAME_LEN 16
-
-struct omap_uart_state {
- int num;
-
- struct list_head node;
- struct omap_hwmod *oh;
- struct omap_device_pad default_omap_uart_pads[2];
-};
-
-static LIST_HEAD(uart_list);
-static u8 num_uarts;
-static u8 console_uart_id = -1;
-static u8 uart_debug;
-
-#define DEFAULT_RXDMA_POLLRATE 1 /* RX DMA polling rate (us) */
-#define DEFAULT_RXDMA_BUFSIZE 4096 /* RX DMA buffer size */
-#define DEFAULT_RXDMA_TIMEOUT (3 * HZ)/* RX DMA timeout (jiffies) */
-
-static struct omap_uart_port_info omap_serial_default_info[] __initdata = {
- {
- .dma_enabled = false,
- .dma_rx_buf_size = DEFAULT_RXDMA_BUFSIZE,
- .dma_rx_poll_rate = DEFAULT_RXDMA_POLLRATE,
- .dma_rx_timeout = DEFAULT_RXDMA_TIMEOUT,
- .autosuspend_timeout = DEFAULT_AUTOSUSPEND_DELAY,
- },
-};
-
-#ifdef CONFIG_PM
-static void omap_uart_enable_wakeup(struct device *dev, bool enable)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct omap_device *od = to_omap_device(pdev);
-
- if (!od)
- return;
-
- if (enable)
- omap_hwmod_enable_wakeup(od->hwmods[0]);
- else
- omap_hwmod_disable_wakeup(od->hwmods[0]);
-}
-
-#else
-static void omap_uart_enable_wakeup(struct device *dev, bool enable)
-{}
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_OMAP_MUX
-
-#define OMAP_UART_DEFAULT_PAD_NAME_LEN 28
-static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN],
- tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata;
-
-static void __init
-omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata,
- struct omap_uart_state *uart)
-{
- uart->default_omap_uart_pads[0].name = rx_pad_name;
- uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX |
- OMAP_DEVICE_PAD_WAKEUP;
- uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT |
- OMAP_MUX_MODE0;
- uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0;
- uart->default_omap_uart_pads[1].name = tx_pad_name;
- uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT |
- OMAP_MUX_MODE0;
- bdata->pads = uart->default_omap_uart_pads;
- bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads);
-}
-
-static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
- struct omap_uart_state *uart)
-{
- struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL;
- struct omap_mux *rx_mux = NULL, *tx_mux = NULL;
- char *rx_fmt, *tx_fmt;
- int uart_nr = bdata->id + 1;
-
- if (bdata->id != 2) {
- rx_fmt = "uart%d_rx.uart%d_rx";
- tx_fmt = "uart%d_tx.uart%d_tx";
- } else {
- rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx";
- tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx";
- }
-
- snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt,
- uart_nr, uart_nr);
- snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt,
- uart_nr, uart_nr);
-
- if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 &&
- omap_mux_get_by_name
- (tx_pad_name, &tx_partition, &tx_mux) >= 0) {
- u16 tx_mode, rx_mode;
-
- tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset);
- rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset);
-
- /*
- * Check if uart is used in default tx/rx mode i.e. in mux mode0
- * if yes then configure rx pin for wake up capability
- */
- if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode))
- omap_serial_fill_uart_tx_rx_pads(bdata, uart);
- }
-}
-#else
-static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
- struct omap_uart_state *uart)
-{
-}
-#endif
-
-static char *cmdline_find_option(char *str)
-{
- extern char *saved_command_line;
-
- return strstr(saved_command_line, str);
-}
-
-static int __init omap_serial_early_init(void)
-{
- if (of_have_populated_dt())
- return -ENODEV;
-
- do {
- char oh_name[MAX_UART_HWMOD_NAME_LEN];
- struct omap_hwmod *oh;
- struct omap_uart_state *uart;
- char uart_name[MAX_UART_HWMOD_NAME_LEN];
-
- snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN,
- "uart%d", num_uarts + 1);
- oh = omap_hwmod_lookup(oh_name);
- if (!oh)
- break;
-
- uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL);
- if (WARN_ON(!uart))
- return -ENODEV;
-
- uart->oh = oh;
- uart->num = num_uarts++;
- list_add_tail(&uart->node, &uart_list);
- snprintf(uart_name, MAX_UART_HWMOD_NAME_LEN,
- "%s%d", OMAP_SERIAL_NAME, uart->num);
-
- if (cmdline_find_option(uart_name)) {
- console_uart_id = uart->num;
-
- if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) {
- uart_debug = true;
- pr_info("%s used as console in debug mode: uart%d clocks will not be gated",
- uart_name, uart->num);
- }
- }
- } while (1);
-
- return 0;
-}
-omap_postcore_initcall(omap_serial_early_init);
-
-/**
- * omap_serial_init_port() - initialize single serial port
- * @bdata: port specific board data pointer
- * @info: platform specific data pointer
- *
- * This function initialies serial driver for given port only.
- * Platforms can call this function instead of omap_serial_init()
- * if they don't plan to use all available UARTs as serial ports.
- *
- * Don't mix calls to omap_serial_init_port() and omap_serial_init(),
- * use only one of the two.
- */
-void __init omap_serial_init_port(struct omap_board_data *bdata,
- struct omap_uart_port_info *info)
-{
- struct omap_uart_state *uart;
- struct omap_hwmod *oh;
- struct platform_device *pdev;
- void *pdata = NULL;
- u32 pdata_size = 0;
- char *name;
- struct omap_uart_port_info omap_up;
-
- if (WARN_ON(!bdata))
- return;
- if (WARN_ON(bdata->id < 0))
- return;
- if (WARN_ON(bdata->id >= num_uarts))
- return;
-
- list_for_each_entry(uart, &uart_list, node)
- if (bdata->id == uart->num)
- break;
- if (!info)
- info = omap_serial_default_info;
-
- oh = uart->oh;
- name = OMAP_SERIAL_DRIVER_NAME;
-
- omap_up.dma_enabled = info->dma_enabled;
- omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
- omap_up.flags = UPF_BOOT_AUTOCONF;
- omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count;
- omap_up.enable_wakeup = omap_uart_enable_wakeup;
- omap_up.dma_rx_buf_size = info->dma_rx_buf_size;
- omap_up.dma_rx_timeout = info->dma_rx_timeout;
- omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
- omap_up.autosuspend_timeout = info->autosuspend_timeout;
-
- pdata = &omap_up;
- pdata_size = sizeof(struct omap_uart_port_info);
-
- if (WARN_ON(!oh))
- return;
-
- pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size);
- if (IS_ERR(pdev)) {
- WARN(1, "Could not build omap_device for %s: %s.\n", name,
- oh->name);
- return;
- }
-
- oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
-
- if (console_uart_id == bdata->id) {
- omap_device_enable(pdev);
- pm_runtime_set_active(&pdev->dev);
- }
-
- oh->dev_attr = uart;
-
- if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads)
- && !uart_debug)
- device_init_wakeup(&pdev->dev, true);
-}
-
-/**
- * omap_serial_board_init() - initialize all supported serial ports
- * @info: platform specific data pointer
- *
- * Initializes all available UARTs as serial ports. Platforms
- * can call this function when they want to have default behaviour
- * for serial ports (e.g initialize them all as serial ports).
- */
-void __init omap_serial_board_init(struct omap_uart_port_info *info)
-{
- struct omap_uart_state *uart;
- struct omap_board_data bdata;
-
- list_for_each_entry(uart, &uart_list, node) {
- bdata.id = uart->num;
- bdata.flags = 0;
- bdata.pads = NULL;
- bdata.pads_cnt = 0;
-
- omap_serial_check_wakeup(&bdata, uart);
-
- if (!info)
- omap_serial_init_port(&bdata, NULL);
- else
- omap_serial_init_port(&bdata, &info[uart->num]);
- }
-}
-
-/**
- * omap_serial_init() - initialize all supported serial ports
- *
- * Initializes all available UARTs.
- * Platforms can call this function when they want to have default behaviour
- * for serial ports (e.g initialize them all as serial ports).
- */
-void __init omap_serial_init(void)
-{
- omap_serial_board_init(NULL);
-}
--
2.10.2
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 02/14] ARM: OMAP2+: Remove legacy i2c.c platform init code
2016-11-11 19:16 [PATCH 00/14] Drop some unused omap platform_data Tony Lindgren
2016-11-11 19:16 ` [PATCH 01/14] ARM: OMAP2+: Remove legacy serial.c Tony Lindgren
@ 2016-11-11 19:16 ` Tony Lindgren
2016-11-11 19:17 ` [PATCH 03/14] ARM: OMAP2+: Remove legacy PM init Tony Lindgren
` (10 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2016-11-11 19:16 UTC (permalink / raw)
To: linux-arm-kernel
We can now initialize I2C for mach-omap2 using device tree. And we
can move the remaining code in plat-omap/i2c.c into mach-omap1/i2c.c.
Note that we cannot remove some of the I2C bus reset functions
as they are being used by hwmod code.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap1/i2c.c | 83 +++++++++++++++++++++++++++++++
arch/arm/mach-omap2/i2c.c | 97 ------------------------------------
arch/arm/plat-omap/Makefile | 3 --
arch/arm/plat-omap/i2c.c | 116 --------------------------------------------
4 files changed, 83 insertions(+), 216 deletions(-)
delete mode 100644 arch/arm/plat-omap/i2c.c
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -19,6 +19,7 @@
*
*/
+#include <linux/i2c.h>
#include <linux/i2c-omap.h>
#include <mach/mux.h>
#include "soc.h"
@@ -91,6 +92,88 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
return platform_device_register(pdev);
}
+#define OMAP_I2C_MAX_CONTROLLERS 4
+static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS];
+
+#define OMAP_I2C_CMDLINE_SETUP (BIT(31))
+
+/**
+ * omap_i2c_bus_setup - Process command line options for the I2C bus speed
+ * @str: String of options
+ *
+ * This function allow to override the default I2C bus speed for given I2C
+ * bus with a command line option.
+ *
+ * Format: i2c_bus=bus_id,clkrate (in kHz)
+ *
+ * Returns 1 on success, 0 otherwise.
+ */
+static int __init omap_i2c_bus_setup(char *str)
+{
+ int ints[3];
+
+ get_options(str, 3, ints);
+ if (ints[0] < 2 || ints[1] < 1 ||
+ ints[1] > OMAP_I2C_MAX_CONTROLLERS)
+ return 0;
+ i2c_pdata[ints[1] - 1].clkrate = ints[2];
+ i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP;
+
+ return 1;
+}
+__setup("i2c_bus=", omap_i2c_bus_setup);
+
+/*
+ * Register busses defined in command line but that are not registered with
+ * omap_register_i2c_bus from board initialization code.
+ */
+int __init omap_register_i2c_bus_cmdline(void)
+{
+ int i, err = 0;
+
+ for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
+ if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
+ i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
+ err = omap_i2c_add_bus(&i2c_pdata[i], i + 1);
+ if (err)
+ goto out;
+ }
+
+out:
+ return err;
+}
+
+/**
+ * omap_register_i2c_bus - register I2C bus with device descriptors
+ * @bus_id: bus id counting from number 1
+ * @clkrate: clock rate of the bus in kHz
+ * @info: pointer into I2C device descriptor table or NULL
+ * @len: number of descriptors in the table
+ *
+ * Returns 0 on success or an error code.
+ */
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len)
+{
+ int err;
+
+ BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS);
+
+ if (info) {
+ err = i2c_register_board_info(bus_id, info, len);
+ if (err)
+ return err;
+ }
+
+ if (!i2c_pdata[bus_id - 1].clkrate)
+ i2c_pdata[bus_id - 1].clkrate = clkrate;
+
+ i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
+
+ return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id);
+}
+
static int __init omap_i2c_cmdline(void)
{
return omap_register_i2c_bus_cmdline();
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -26,7 +26,6 @@
#include "prm.h"
#include "common.h"
-#include "mux.h"
#include "i2c.h"
/* In register I2C_CON, Bit 15 is the I2C enable bit */
@@ -36,20 +35,6 @@
#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16
-static void __init omap2_i2c_mux_pins(int bus_id)
-{
- char mux_name[sizeof("i2c2_scl.i2c2_scl")];
-
- /* First I2C bus is not muxable */
- if (bus_id == 1)
- return;
-
- sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id);
- omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
- sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
- omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
-}
-
/**
* omap_i2c_reset - reset the omap i2c module.
* @oh: struct omap_hwmod *
@@ -107,85 +92,3 @@ int omap_i2c_reset(struct omap_hwmod *oh)
return 0;
}
-
-static int __init omap_i2c_nr_ports(void)
-{
- int ports = 0;
-
- if (cpu_is_omap24xx())
- ports = 2;
- else if (cpu_is_omap34xx())
- ports = 3;
- else if (cpu_is_omap44xx())
- ports = 4;
- return ports;
-}
-
-/*
- * XXX This function is a temporary compatibility wrapper - only
- * needed until the I2C driver can be converted to call
- * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
- */
-static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
-{
- omap_pm_set_max_mpu_wakeup_lat(dev, t);
-}
-
-static const char name[] = "omap_i2c";
-
-int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
- int bus_id)
-{
- int l;
- struct omap_hwmod *oh;
- struct platform_device *pdev;
- char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
- struct omap_i2c_bus_platform_data *pdata;
- struct omap_i2c_dev_attr *dev_attr;
-
- if (bus_id > omap_i2c_nr_ports())
- return -EINVAL;
-
- omap2_i2c_mux_pins(bus_id);
-
- l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
- WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
- "String buffer overflow in I2C%d device setup\n", bus_id);
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up %s\n", oh_name);
- return -EEXIST;
- }
-
- pdata = i2c_pdata;
- /*
- * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
- * use, and functionality implementation flags, up to the OMAP I2C
- * driver via platform data
- */
- pdata->rev = oh->class->rev;
-
- dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
- pdata->flags = dev_attr->flags;
-
- /*
- * When waiting for completion of a i2c transfer, we need to
- * set a wake up latency constraint for the MPU. This is to
- * ensure quick enough wakeup from idle, when transfer
- * completes.
- * Only omap3 has support for constraints
- */
- if (cpu_is_omap34xx())
- pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
- pdev = omap_device_build(name, bus_id, oh, pdata,
- sizeof(struct omap_i2c_bus_platform_data));
- WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-
-static int __init omap_i2c_cmdline(void)
-{
- return omap_register_i2c_bus_cmdline();
-}
-omap_subsys_initcall(omap_i2c_cmdline);
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -11,6 +11,3 @@ obj-y := sram.o dma.o counter_32k.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
-i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
-obj-y += $(i2c-omap-m) $(i2c-omap-y)
-
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
deleted file mode 100644
--- a/arch/arm/plat-omap/i2c.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/i2c.c
- *
- * Helper module for board specific I2C bus registration
- *
- * Copyright (C) 2007 Nokia Corporation.
- *
- * Contact: Jarkko Nikula <jhnikula@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c-omap.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#include <plat/i2c.h>
-
-#define OMAP_I2C_MAX_CONTROLLERS 4
-static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS];
-
-#define OMAP_I2C_CMDLINE_SETUP (BIT(31))
-
-/**
- * omap_i2c_bus_setup - Process command line options for the I2C bus speed
- * @str: String of options
- *
- * This function allow to override the default I2C bus speed for given I2C
- * bus with a command line option.
- *
- * Format: i2c_bus=bus_id,clkrate (in kHz)
- *
- * Returns 1 on success, 0 otherwise.
- */
-static int __init omap_i2c_bus_setup(char *str)
-{
- int ints[3];
-
- get_options(str, 3, ints);
- if (ints[0] < 2 || ints[1] < 1 ||
- ints[1] > OMAP_I2C_MAX_CONTROLLERS)
- return 0;
- i2c_pdata[ints[1] - 1].clkrate = ints[2];
- i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP;
-
- return 1;
-}
-__setup("i2c_bus=", omap_i2c_bus_setup);
-
-/*
- * Register busses defined in command line but that are not registered with
- * omap_register_i2c_bus from board initialization code.
- */
-int __init omap_register_i2c_bus_cmdline(void)
-{
- int i, err = 0;
-
- for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
- if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
- i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
- err = omap_i2c_add_bus(&i2c_pdata[i], i + 1);
- if (err)
- goto out;
- }
-
-out:
- return err;
-}
-
-/**
- * omap_register_i2c_bus - register I2C bus with device descriptors
- * @bus_id: bus id counting from number 1
- * @clkrate: clock rate of the bus in kHz
- * @info: pointer into I2C device descriptor table or NULL
- * @len: number of descriptors in the table
- *
- * Returns 0 on success or an error code.
- */
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
- struct i2c_board_info const *info,
- unsigned len)
-{
- int err;
-
- BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS);
-
- if (info) {
- err = i2c_register_board_info(bus_id, info, len);
- if (err)
- return err;
- }
-
- if (!i2c_pdata[bus_id - 1].clkrate)
- i2c_pdata[bus_id - 1].clkrate = clkrate;
-
- i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
-
- return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id);
-}
--
2.10.2
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 03/14] ARM: OMAP2+: Remove legacy PM init
2016-11-11 19:16 [PATCH 00/14] Drop some unused omap platform_data Tony Lindgren
2016-11-11 19:16 ` [PATCH 01/14] ARM: OMAP2+: Remove legacy serial.c Tony Lindgren
2016-11-11 19:16 ` [PATCH 02/14] ARM: OMAP2+: Remove legacy i2c.c platform init code Tony Lindgren
@ 2016-11-11 19:17 ` Tony Lindgren
2016-11-11 19:17 ` [PATCH 04/14] ARM: OMAP2+: Remove legacy twl4030 platform init code Tony Lindgren
` (9 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2016-11-11 19:17 UTC (permalink / raw)
To: linux-arm-kernel
This is no longer needed when booted with device tree.
And let's replace cpu_is with soc_is for the PM code to
avoid confusion, they do the same thing.
Note that omap_pmic_late_init() now just calls
omap3_twl_init() and omap4_twl_init() to initialize the
voltage layer so we can remove the remaining references
to twl-common code and remove it in the following patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/pm.c | 66 +++++-------------------------------------------
1 file changed, 6 insertions(+), 60 deletions(-)
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -30,7 +30,6 @@
#include "powerdomain.h"
#include "clockdomain.h"
#include "pm.h"
-#include "twl-common.h"
#ifdef CONFIG_SUSPEND
/*
@@ -72,42 +71,6 @@ void omap_pm_get_oscillator(u32 *tstart, u32 *tshut)
}
#endif
-static int __init _init_omap_device(char *name)
-{
- struct omap_hwmod *oh;
- struct platform_device *pdev;
-
- oh = omap_hwmod_lookup(name);
- if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
- __func__, name))
- return -ENODEV;
-
- pdev = omap_device_build(oh->name, 0, oh, NULL, 0);
- if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n",
- __func__, name))
- return -ENODEV;
-
- return 0;
-}
-
-/*
- * Build omap_devices for processors and bus.
- */
-static void __init omap2_init_processor_devices(void)
-{
- _init_omap_device("mpu");
- if (omap3_has_iva())
- _init_omap_device("iva");
-
- if (cpu_is_omap44xx()) {
- _init_omap_device("l3_main_1");
- _init_omap_device("dsp");
- _init_omap_device("iva");
- } else {
- _init_omap_device("l3_main");
- }
-}
-
int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
{
clkdm_allow_idle(clkdm);
@@ -215,7 +178,7 @@ static int omap_pm_enter(suspend_state_t suspend_state)
static int omap_pm_begin(suspend_state_t state)
{
cpu_idle_poll_ctrl(true);
- if (cpu_is_omap34xx())
+ if (soc_is_omap34xx())
omap_prcm_irq_prepare();
return 0;
}
@@ -227,7 +190,7 @@ static void omap_pm_end(void)
static void omap_pm_finish(void)
{
- if (cpu_is_omap34xx())
+ if (soc_is_omap34xx())
omap_prcm_irq_complete();
}
@@ -252,7 +215,7 @@ void omap_common_suspend_init(void *pm_suspend)
static void __init omap3_init_voltages(void)
{
- if (!cpu_is_omap34xx())
+ if (!soc_is_omap34xx())
return;
omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
@@ -261,7 +224,7 @@ static void __init omap3_init_voltages(void)
static void __init omap4_init_voltages(void)
{
- if (!cpu_is_omap44xx())
+ if (!soc_is_omap44xx())
return;
omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
@@ -269,18 +232,8 @@ static void __init omap4_init_voltages(void)
omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
}
-static inline void omap_init_cpufreq(void)
-{
- struct platform_device_info devinfo = { .name = "omap-cpufreq" };
-
- if (!of_have_populated_dt())
- platform_device_register_full(&devinfo);
-}
-
static int __init omap2_common_pm_init(void)
{
- if (!of_have_populated_dt())
- omap2_init_processor_devices();
omap_pm_if_init();
return 0;
@@ -289,13 +242,9 @@ omap_postcore_initcall(omap2_common_pm_init);
int __init omap2_common_pm_late_init(void)
{
- if (of_have_populated_dt()) {
- omap3_twl_init();
- omap4_twl_init();
- }
-
/* Init the voltage layer */
- omap_pmic_late_init();
+ omap3_twl_init();
+ omap4_twl_init();
omap_voltage_late_init();
/* Initialize the voltages */
@@ -305,8 +254,5 @@ int __init omap2_common_pm_late_init(void)
/* Smartreflex device init */
omap_devinit_smartreflex();
- /* cpufreq dummy device instantiation */
- omap_init_cpufreq();
-
return 0;
}
--
2.10.2
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 04/14] ARM: OMAP2+: Remove legacy twl4030 platform init code
2016-11-11 19:16 [PATCH 00/14] Drop some unused omap platform_data Tony Lindgren
` (2 preceding siblings ...)
2016-11-11 19:17 ` [PATCH 03/14] ARM: OMAP2+: Remove legacy PM init Tony Lindgren
@ 2016-11-11 19:17 ` Tony Lindgren
2016-11-11 19:17 ` [PATCH 05/14] ARM: OMAP2+: Remove legacy usb-host.c " Tony Lindgren
` (8 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2016-11-11 19:17 UTC (permalink / raw)
To: linux-arm-kernel
This code is no longer used and can be removed as we
are using device tree.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/common-board-devices.h | 1 -
arch/arm/mach-omap2/twl-common.c | 81 ------------------------------
arch/arm/mach-omap2/twl-common.h | 42 ----------------
4 files changed, 1 insertion(+), 125 deletions(-)
delete mode 100644 arch/arm/mach-omap2/twl-common.c
delete mode 100644 arch/arm/mach-omap2/twl-common.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -257,4 +257,4 @@ obj-y += $(nand-m) $(nand-y)
smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
obj-y += $(smsc911x-m) $(smsc911x-y)
-obj-y += common-board-devices.o twl-common.o dss-common.o
+obj-y += common-board-devices.o dss-common.o
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -3,7 +3,6 @@
#include <sound/tlv320aic3x.h>
#include <linux/mfd/menelaus.h>
-#include "twl-common.h"
#define NAND_BLOCK_SIZE SZ_128K
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
deleted file mode 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * twl-common.c
- *
- * Copyright (C) 2011 Texas Instruments, Inc..
- * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c/twl.h>
-#include <linux/gpio.h>
-#include <linux/string.h>
-#include <linux/phy/phy.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include "soc.h"
-#include "twl-common.h"
-#include "pm.h"
-#include "voltage.h"
-#include "mux.h"
-
-static struct i2c_board_info __initdata pmic_i2c_board_info = {
- .addr = 0x48,
- .flags = I2C_CLIENT_WAKE,
-};
-
-void __init omap_pmic_late_init(void)
-{
- /* Init the OMAP TWL parameters (if PMIC has been registerd) */
- if (!pmic_i2c_board_info.irq)
- return;
-
- omap3_twl_init();
- omap4_twl_init();
-}
-
-#if IS_ENABLED(CONFIG_SND_OMAP_SOC_OMAP_TWL4030)
-#include <linux/platform_data/omap-twl4030.h>
-
-/* Commonly used configuration */
-static struct omap_tw4030_pdata omap_twl4030_audio_data;
-
-static struct platform_device audio_device = {
- .name = "omap-twl4030",
- .id = -1,
-};
-
-void omap_twl4030_audio_init(char *card_name,
- struct omap_tw4030_pdata *pdata)
-{
- if (!pdata)
- pdata = &omap_twl4030_audio_data;
-
- pdata->card_name = card_name;
-
- audio_device.dev.platform_data = pdata;
- platform_device_register(&audio_device);
-}
-
-#else /* SOC_OMAP_TWL4030 */
-void omap_twl4030_audio_init(char *card_name,
- struct omap_tw4030_pdata *pdata)
-{
- return;
-}
-#endif /* SOC_OMAP_TWL4030 */
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
deleted file mode 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef __OMAP_PMIC_COMMON__
-#define __OMAP_PMIC_COMMON__
-
-#include "common.h"
-
-#define TWL_COMMON_PDATA_USB (1 << 0)
-#define TWL_COMMON_PDATA_BCI (1 << 1)
-#define TWL_COMMON_PDATA_MADC (1 << 2)
-#define TWL_COMMON_PDATA_AUDIO (1 << 3)
-
-/* Common LDO regulators for TWL4030/TWL6030 */
-#define TWL_COMMON_REGULATOR_VDAC (1 << 0)
-#define TWL_COMMON_REGULATOR_VAUX1 (1 << 1)
-#define TWL_COMMON_REGULATOR_VAUX2 (1 << 2)
-#define TWL_COMMON_REGULATOR_VAUX3 (1 << 3)
-
-/* TWL6030 LDO regulators */
-#define TWL_COMMON_REGULATOR_VMMC (1 << 4)
-#define TWL_COMMON_REGULATOR_VPP (1 << 5)
-#define TWL_COMMON_REGULATOR_VUSIM (1 << 6)
-#define TWL_COMMON_REGULATOR_VANA (1 << 7)
-#define TWL_COMMON_REGULATOR_VCXIO (1 << 8)
-#define TWL_COMMON_REGULATOR_VUSB (1 << 9)
-#define TWL_COMMON_REGULATOR_CLK32KG (1 << 10)
-#define TWL_COMMON_REGULATOR_V1V8 (1 << 11)
-#define TWL_COMMON_REGULATOR_V2V1 (1 << 12)
-
-/* TWL4030 LDO regulators */
-#define TWL_COMMON_REGULATOR_VPLL1 (1 << 4)
-#define TWL_COMMON_REGULATOR_VPLL2 (1 << 5)
-
-
-struct twl4030_platform_data;
-struct twl6040_platform_data;
-struct omap_tw4030_pdata;
-struct i2c_board_info;
-
-void omap_pmic_late_init(void);
-
-void omap_twl4030_audio_init(char *card_name, struct omap_tw4030_pdata *pdata);
-
-#endif /* __OMAP_PMIC_COMMON__ */
--
2.10.2
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 05/14] ARM: OMAP2+: Remove legacy usb-host.c platform init code
2016-11-11 19:16 [PATCH 00/14] Drop some unused omap platform_data Tony Lindgren
` (3 preceding siblings ...)
2016-11-11 19:17 ` [PATCH 04/14] ARM: OMAP2+: Remove legacy twl4030 platform init code Tony Lindgren
@ 2016-11-11 19:17 ` Tony Lindgren
2016-11-11 19:17 ` [PATCH 06/14] ARM: OMAP2+: Remove legacy muxing for usb-tusb6010.c Tony Lindgren
` (7 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2016-11-11 19:17 UTC (permalink / raw)
To: linux-arm-kernel
This is no longer needed when booted with device tree.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Makefile | 1 -
arch/arm/mach-omap2/usb-host.c | 496 -----------------------------------------
2 files changed, 497 deletions(-)
delete mode 100644 arch/arm/mach-omap2/usb-host.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -246,7 +246,6 @@ obj-y += usb-musb.o
obj-y += omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
-obj-y += usb-host.o
onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
obj-y += $(onenand-m) $(onenand-y)
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
deleted file mode 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ /dev/null
@@ -1,496 +0,0 @@
-/*
- * usb-host.c - OMAP USB Host
- *
- * This file will contain the board specific details for the
- * Synopsys EHCI/OHCI host controller on OMAP3430 and onwards
- *
- * Copyright (C) 2007-2011 Texas Instruments
- * Author: Vikram Pandita <vikram.pandita@ti.com>
- * Author: Keshava Munegowda <keshava_mgowda@ti.com>
- *
- * Generalization by:
- * Felipe Balbi <balbi@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/string.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/usb_phy_generic.h>
-
-#include "soc.h"
-#include "omap_device.h"
-#include "mux.h"
-#include "usb.h"
-
-#ifdef CONFIG_MFD_OMAP_USB_HOST
-
-#define OMAP_USBHS_DEVICE "usbhs_omap"
-#define OMAP_USBTLL_DEVICE "usbhs_tll"
-#define USBHS_UHH_HWMODNAME "usb_host_hs"
-#define USBHS_TLL_HWMODNAME "usb_tll_hs"
-
-/* MUX settings for EHCI pins */
-/*
- * setup_ehci_io_mux - initialize IO pad mux for USBHOST
- */
-static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
-{
- switch (port_mode[0]) {
- case OMAP_EHCI_PORT_MODE_PHY:
- omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
- break;
- case OMAP_EHCI_PORT_MODE_TLL:
- omap_mux_init_signal("hsusb1_tll_stp",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hsusb1_tll_clk",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_dir",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_nxt",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_data0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_data1",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_data2",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_data3",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_data4",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_data5",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_data6",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_data7",
- OMAP_PIN_INPUT_PULLDOWN);
- break;
- case OMAP_USBHS_PORT_MODE_UNUSED:
- /* FALLTHROUGH */
- default:
- break;
- }
-
- switch (port_mode[1]) {
- case OMAP_EHCI_PORT_MODE_PHY:
- omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_data0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_data1",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_data2",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_data3",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_data4",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_data5",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_data6",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_data7",
- OMAP_PIN_INPUT_PULLDOWN);
- break;
- case OMAP_EHCI_PORT_MODE_TLL:
- omap_mux_init_signal("hsusb2_tll_stp",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hsusb2_tll_clk",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_dir",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_nxt",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_data0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_data1",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_data2",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_data3",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_data4",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_data5",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_data6",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_data7",
- OMAP_PIN_INPUT_PULLDOWN);
- break;
- case OMAP_USBHS_PORT_MODE_UNUSED:
- /* FALLTHROUGH */
- default:
- break;
- }
-
- switch (port_mode[2]) {
- case OMAP_EHCI_PORT_MODE_PHY:
- printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
- break;
- case OMAP_EHCI_PORT_MODE_TLL:
- omap_mux_init_signal("hsusb3_tll_stp",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hsusb3_tll_clk",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_dir",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_nxt",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_data0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_data1",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_data2",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_data3",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_data4",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_data5",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_data6",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_data7",
- OMAP_PIN_INPUT_PULLDOWN);
- break;
- case OMAP_USBHS_PORT_MODE_UNUSED:
- /* FALLTHROUGH */
- default:
- break;
- }
-
- return;
-}
-
-static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
-{
- switch (port_mode[0]) {
- case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
- case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
- omap_mux_init_signal("mm1_rxdp",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("mm1_rxdm",
- OMAP_PIN_INPUT_PULLDOWN);
- /* FALLTHROUGH */
- case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
- case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
- omap_mux_init_signal("mm1_rxrcv",
- OMAP_PIN_INPUT_PULLDOWN);
- /* FALLTHROUGH */
- case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
- omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT);
- /* FALLTHROUGH */
- case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
- omap_mux_init_signal("mm1_txse0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("mm1_txdat",
- OMAP_PIN_INPUT_PULLDOWN);
- break;
- case OMAP_USBHS_PORT_MODE_UNUSED:
- /* FALLTHROUGH */
- default:
- break;
- }
- switch (port_mode[1]) {
- case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
- case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
- omap_mux_init_signal("mm2_rxdp",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("mm2_rxdm",
- OMAP_PIN_INPUT_PULLDOWN);
- /* FALLTHROUGH */
- case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
- case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
- omap_mux_init_signal("mm2_rxrcv",
- OMAP_PIN_INPUT_PULLDOWN);
- /* FALLTHROUGH */
- case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
- omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT);
- /* FALLTHROUGH */
- case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
- omap_mux_init_signal("mm2_txse0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("mm2_txdat",
- OMAP_PIN_INPUT_PULLDOWN);
- break;
- case OMAP_USBHS_PORT_MODE_UNUSED:
- /* FALLTHROUGH */
- default:
- break;
- }
- switch (port_mode[2]) {
- case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
- case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
- omap_mux_init_signal("mm3_rxdp",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("mm3_rxdm",
- OMAP_PIN_INPUT_PULLDOWN);
- /* FALLTHROUGH */
- case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
- case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
- omap_mux_init_signal("mm3_rxrcv",
- OMAP_PIN_INPUT_PULLDOWN);
- /* FALLTHROUGH */
- case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
- omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT);
- /* FALLTHROUGH */
- case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
- omap_mux_init_signal("mm3_txse0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("mm3_txdat",
- OMAP_PIN_INPUT_PULLDOWN);
- break;
- case OMAP_USBHS_PORT_MODE_UNUSED:
- /* FALLTHROUGH */
- default:
- break;
- }
-}
-
-void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
-{
- struct omap_hwmod *uhh_hwm, *tll_hwm;
- struct platform_device *pdev;
- int bus_id = -1;
-
- if (cpu_is_omap34xx()) {
- setup_ehci_io_mux(pdata->port_mode);
- setup_ohci_io_mux(pdata->port_mode);
-
- if (omap_rev() <= OMAP3430_REV_ES2_1)
- pdata->single_ulpi_bypass = true;
-
- }
-
- uhh_hwm = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
- if (!uhh_hwm) {
- pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME);
- return;
- }
-
- tll_hwm = omap_hwmod_lookup(USBHS_TLL_HWMODNAME);
- if (!tll_hwm) {
- pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME);
- return;
- }
-
- pdev = omap_device_build(OMAP_USBTLL_DEVICE, bus_id, tll_hwm,
- pdata, sizeof(*pdata));
- if (IS_ERR(pdev)) {
- pr_err("Could not build hwmod device %s\n",
- USBHS_TLL_HWMODNAME);
- return;
- }
-
- pdev = omap_device_build(OMAP_USBHS_DEVICE, bus_id, uhh_hwm,
- pdata, sizeof(*pdata));
- if (IS_ERR(pdev)) {
- pr_err("Could not build hwmod devices %s\n",
- USBHS_UHH_HWMODNAME);
- return;
- }
-}
-
-#else
-
-void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
-{
-}
-
-#endif
-
-/* Template for PHY regulators */
-static struct fixed_voltage_config hsusb_reg_config = {
- /* .supply_name filled later */
- .microvolts = 3300000,
- .gpio = -1, /* updated later */
- .startup_delay = 70000, /* 70msec */
- .enable_high = 1, /* updated later */
- .enabled_at_boot = 0, /* keep in RESET */
- /* .init_data filled later */
-};
-
-static const char *nop_name = "usb_phy_generic"; /* NOP PHY driver */
-static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */
-
-/**
- * usbhs_add_regulator - Add a gpio based fixed voltage regulator device
- * @name: name for the regulator
- * @dev_id: device id of the device this regulator supplies power to
- * @dev_supply: supply name that the device expects
- * @gpio: GPIO number
- * @polarity: 1 - Active high, 0 - Active low
- */
-static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply,
- int gpio, int polarity)
-{
- struct regulator_consumer_supply *supplies;
- struct regulator_init_data *reg_data;
- struct fixed_voltage_config *config;
- struct platform_device *pdev;
- struct platform_device_info pdevinfo;
- int ret = -ENOMEM;
-
- supplies = kzalloc(sizeof(*supplies), GFP_KERNEL);
- if (!supplies)
- return -ENOMEM;
-
- supplies->supply = dev_supply;
- supplies->dev_name = dev_id;
-
- reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL);
- if (!reg_data)
- goto err_data;
-
- reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
- reg_data->consumer_supplies = supplies;
- reg_data->num_consumer_supplies = 1;
-
- config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
- GFP_KERNEL);
- if (!config)
- goto err_config;
-
- config->supply_name = kstrdup(name, GFP_KERNEL);
- if (!config->supply_name)
- goto err_supplyname;
-
- config->gpio = gpio;
- config->enable_high = polarity;
- config->init_data = reg_data;
-
- /* create a regulator device */
- memset(&pdevinfo, 0, sizeof(pdevinfo));
- pdevinfo.name = reg_name;
- pdevinfo.id = PLATFORM_DEVID_AUTO;
- pdevinfo.data = config;
- pdevinfo.size_data = sizeof(*config);
-
- pdev = platform_device_register_full(&pdevinfo);
- if (IS_ERR(pdev)) {
- ret = PTR_ERR(pdev);
- pr_err("%s: Failed registering regulator %s for %s : %d\n",
- __func__, name, dev_id, ret);
- goto err_register;
- }
-
- return 0;
-
-err_register:
- kfree(config->supply_name);
-err_supplyname:
- kfree(config);
-err_config:
- kfree(reg_data);
-err_data:
- kfree(supplies);
- return ret;
-}
-
-#define MAX_STR 20
-
-int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
-{
- char rail_name[MAX_STR];
- int i;
- struct platform_device *pdev;
- char *phy_id;
- struct platform_device_info pdevinfo;
- struct usb_phy_generic_platform_data nop_pdata;
-
- for (i = 0; i < num_phys; i++) {
-
- if (!phy->port) {
- pr_err("%s: Invalid port 0. Must start from 1\n",
- __func__);
- continue;
- }
-
- /* do we need a NOP PHY device ? */
- if (!gpio_is_valid(phy->reset_gpio) &&
- !gpio_is_valid(phy->vcc_gpio))
- continue;
-
- phy_id = kmalloc(MAX_STR, GFP_KERNEL);
- if (!phy_id) {
- pr_err("%s: kmalloc() failed\n", __func__);
- return -ENOMEM;
- }
-
- /* set platform data */
- memset(&nop_pdata, 0, sizeof(nop_pdata));
- if (gpio_is_valid(phy->vcc_gpio))
- nop_pdata.needs_vcc = true;
- nop_pdata.gpio_reset = phy->reset_gpio;
- nop_pdata.type = USB_PHY_TYPE_USB2;
-
- /* create a NOP PHY device */
- memset(&pdevinfo, 0, sizeof(pdevinfo));
- pdevinfo.name = nop_name;
- pdevinfo.id = phy->port;
- pdevinfo.data = &nop_pdata;
- pdevinfo.size_data =
- sizeof(struct usb_phy_generic_platform_data);
- scnprintf(phy_id, MAX_STR, "usb_phy_generic.%d",
- phy->port);
- pdev = platform_device_register_full(&pdevinfo);
- if (IS_ERR(pdev)) {
- pr_err("%s: Failed to register device %s : %ld\n",
- __func__, phy_id, PTR_ERR(pdev));
- kfree(phy_id);
- continue;
- }
-
- usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
-
- /* Do we need VCC regulator ? */
- if (gpio_is_valid(phy->vcc_gpio)) {
- scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port);
- usbhs_add_regulator(rail_name, phy_id, "vcc",
- phy->vcc_gpio, phy->vcc_polarity);
- }
-
- phy++;
- }
-
- return 0;
-}
--
2.10.2
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 06/14] ARM: OMAP2+: Remove legacy muxing for usb-tusb6010.c
2016-11-11 19:16 [PATCH 00/14] Drop some unused omap platform_data Tony Lindgren
` (4 preceding siblings ...)
2016-11-11 19:17 ` [PATCH 05/14] ARM: OMAP2+: Remove legacy usb-host.c " Tony Lindgren
@ 2016-11-11 19:17 ` Tony Lindgren
2016-11-11 19:17 ` [PATCH 07/14] ARM: OMAP2+: Remove legacy usb-musb.c platform init code Tony Lindgren
` (6 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2016-11-11 19:17 UTC (permalink / raw)
To: linux-arm-kernel
We are moving to device tree based booting, and this should be
done using pinctrl-single instead.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/usb-tusb6010.c | 21 ---------------------
1 file changed, 21 deletions(-)
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -22,8 +22,6 @@
#include "gpmc.h"
-#include "mux.h"
-
static u8 async_cs, sync_cs;
static unsigned refclk_psec;
@@ -226,25 +224,6 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
}
tusb_device.dev.platform_data = data;
- /* REVISIT let the driver know what DMA channels work */
- if (!dmachan)
- tusb_device.dev.dma_mask = NULL;
- else {
- /* assume OMAP 2420 ES2.0 and later */
- if (dmachan & (1 << 0))
- omap_mux_init_signal("sys_ndmareq0", 0);
- if (dmachan & (1 << 1))
- omap_mux_init_signal("sys_ndmareq1", 0);
- if (dmachan & (1 << 2))
- omap_mux_init_signal("sys_ndmareq2", 0);
- if (dmachan & (1 << 3))
- omap_mux_init_signal("sys_ndmareq3", 0);
- if (dmachan & (1 << 4))
- omap_mux_init_signal("sys_ndmareq4", 0);
- if (dmachan & (1 << 5))
- omap_mux_init_signal("sys_ndmareq5", 0);
- }
-
/* so far so good ... register the device */
status = platform_device_register(&tusb_device);
if (status < 0) {
--
2.10.2
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 07/14] ARM: OMAP2+: Remove legacy usb-musb.c platform init code
2016-11-11 19:16 [PATCH 00/14] Drop some unused omap platform_data Tony Lindgren
` (5 preceding siblings ...)
2016-11-11 19:17 ` [PATCH 06/14] ARM: OMAP2+: Remove legacy muxing for usb-tusb6010.c Tony Lindgren
@ 2016-11-11 19:17 ` Tony Lindgren
2016-11-11 19:17 ` [PATCH 08/14] ARM: OMAP2+: Remove legacy hwmod mux code Tony Lindgren
` (5 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2016-11-11 19:17 UTC (permalink / raw)
To: linux-arm-kernel
This is no longer needed when booted with device tree.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Makefile | 1 -
arch/arm/mach-omap2/usb-musb.c | 106 -----------------------------------------
2 files changed, 107 deletions(-)
delete mode 100644 arch/arm/mach-omap2/usb-musb.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -242,7 +242,6 @@ obj-y += $(omap-flash-y) $(omap-flash-m)
omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o
obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y)
-obj-y += usb-musb.o
obj-y += omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
deleted file mode 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/usb-musb.c
- *
- * This file will contain the board specific details for the
- * MENTOR USB OTG controller on OMAP3430
- *
- * Copyright (C) 2007-2008 Texas Instruments
- * Copyright (C) 2008 Nokia Corporation
- * Author: Vikram Pandita
- *
- * Generalization by:
- * Felipe Balbi <felipe.balbi@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-#include <linux/usb/musb.h>
-
-#include "omap_device.h"
-#include "soc.h"
-#include "mux.h"
-#include "usb.h"
-
-static struct musb_hdrc_config musb_config = {
- .multipoint = 1,
- .dyn_fifo = 1,
- .num_eps = 16,
- .ram_bits = 12,
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
- .mode = MUSB_OTG,
-
- /* .clock is set dynamically */
- .config = &musb_config,
-
- /* REVISIT charge pump on TWL4030 can supply up to
- * 100 mA ... but this value is board-specific, like
- * "mode", and should be passed to usb_musb_init().
- */
- .power = 50, /* up to 100 mA */
-};
-
-static u64 musb_dmamask = DMA_BIT_MASK(32);
-
-static struct omap_musb_board_data musb_default_board_data = {
- .interface_type = MUSB_INTERFACE_ULPI,
- .mode = MUSB_OTG,
- .power = 100,
-};
-
-void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
-{
- struct omap_hwmod *oh;
- struct platform_device *pdev;
- struct device *dev;
- int bus_id = -1;
- const char *oh_name, *name;
- struct omap_musb_board_data *board_data;
-
- if (musb_board_data)
- board_data = musb_board_data;
- else
- board_data = &musb_default_board_data;
-
- /*
- * REVISIT: This line can be removed once all the platforms using
- * musb_core.c have been converted to use use clkdev.
- */
- musb_plat.clock = "ick";
- musb_plat.board_data = board_data;
- musb_plat.power = board_data->power >> 1;
- musb_plat.mode = board_data->mode;
- musb_plat.extvbus = board_data->extvbus;
-
- oh_name = "usb_otg_hs";
- name = "musb-omap2430";
-
- oh = omap_hwmod_lookup(oh_name);
- if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
- __func__, oh_name))
- return;
-
- pdev = omap_device_build(name, bus_id, oh, &musb_plat,
- sizeof(musb_plat));
- if (IS_ERR(pdev)) {
- pr_err("Could not build omap_device for %s %s\n",
- name, oh_name);
- return;
- }
-
- dev = &pdev->dev;
- get_device(dev);
- dev->dma_mask = &musb_dmamask;
- dev->coherent_dma_mask = musb_dmamask;
- put_device(dev);
-}
--
2.10.2
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 08/14] ARM: OMAP2+: Remove legacy hwmod mux code
2016-11-11 19:16 [PATCH 00/14] Drop some unused omap platform_data Tony Lindgren
` (6 preceding siblings ...)
2016-11-11 19:17 ` [PATCH 07/14] ARM: OMAP2+: Remove legacy usb-musb.c platform init code Tony Lindgren
@ 2016-11-11 19:17 ` Tony Lindgren
2016-11-11 19:17 ` [PATCH 10/14] ARM: OMAP2+: Remove legacy data from hwmod for omap3 Tony Lindgren
` (4 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2016-11-11 19:17 UTC (permalink / raw)
To: linux-arm-kernel
This is no longer needed when booted with device tree.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/devices.c | 1 -
arch/arm/mach-omap2/omap_hwmod.c | 107 +--------------------------------------
2 files changed, 1 insertion(+), 107 deletions(-)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -30,7 +30,6 @@
#include "soc.h"
#include "common.h"
-#include "mux.h"
#include "control.h"
#include "display.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -160,7 +160,6 @@
#include "prm44xx.h"
#include "prm33xx.h"
#include "prminst44xx.h"
-#include "mux.h"
#include "pm.h"
/* Name of the OMAP hwmod for the MPU */
@@ -217,9 +216,6 @@ static LIST_HEAD(omap_hwmod_list);
/* mpu_oh: used to add/remove MPU initiator from sleepdep list */
static struct omap_hwmod *mpu_oh;
-/* io_chain_lock: used to serialize reconfigurations of the I/O chain */
-static DEFINE_SPINLOCK(io_chain_lock);
-
/*
* linkspace: ptr to a buffer that struct omap_hwmod_link records are
* allocated from - used to reduce the number of small memory
@@ -594,51 +590,6 @@ static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
}
/**
- * _set_idle_ioring_wakeup - enable/disable IO pad wakeup on hwmod idle for mux
- * @oh: struct omap_hwmod *
- * @set_wake: bool value indicating to set (true) or clear (false) wakeup enable
- *
- * Set or clear the I/O pad wakeup flag in the mux entries for the
- * hwmod @oh. This function changes the @oh->mux->pads_dynamic array
- * in memory. If the hwmod is currently idled, and the new idle
- * values don't match the previous ones, this function will also
- * update the SCM PADCTRL registers. Otherwise, if the hwmod is not
- * currently idled, this function won't touch the hardware: the new
- * mux settings are written to the SCM PADCTRL registers when the
- * hwmod is idled. No return value.
- */
-static void _set_idle_ioring_wakeup(struct omap_hwmod *oh, bool set_wake)
-{
- struct omap_device_pad *pad;
- bool change = false;
- u16 prev_idle;
- int j;
-
- if (!oh->mux || !oh->mux->enabled)
- return;
-
- for (j = 0; j < oh->mux->nr_pads_dynamic; j++) {
- pad = oh->mux->pads_dynamic[j];
-
- if (!(pad->flags & OMAP_DEVICE_PAD_WAKEUP))
- continue;
-
- prev_idle = pad->idle;
-
- if (set_wake)
- pad->idle |= OMAP_WAKEUP_EN;
- else
- pad->idle &= ~OMAP_WAKEUP_EN;
-
- if (prev_idle != pad->idle)
- change = true;
- }
-
- if (change && oh->_state == _HWMOD_STATE_IDLE)
- omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
-}
-
-/**
* _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
* @oh: struct omap_hwmod *
*
@@ -2018,29 +1969,6 @@ static int _reset(struct omap_hwmod *oh)
}
/**
- * _reconfigure_io_chain - clear any I/O chain wakeups and reconfigure chain
- *
- * Call the appropriate PRM function to clear any logged I/O chain
- * wakeups and to reconfigure the chain. This apparently needs to be
- * done upon every mux change. Since hwmods can be concurrently
- * enabled and idled, hold a spinlock around the I/O chain
- * reconfiguration sequence. No return value.
- *
- * XXX When the PRM code is moved to drivers, this function can be removed,
- * as the PRM infrastructure should abstract this.
- */
-static void _reconfigure_io_chain(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&io_chain_lock, flags);
-
- omap_prm_reconfigure_io_chain();
-
- spin_unlock_irqrestore(&io_chain_lock, flags);
-}
-
-/**
* _omap4_update_context_lost - increment hwmod context loss counter if
* hwmod context was lost, and clear hardware context loss reg
* @oh: hwmod to check for context loss
@@ -2109,18 +2037,9 @@ static int _enable(struct omap_hwmod *oh)
/*
* hwmods with HWMOD_INIT_NO_IDLE flag set are left in enabled
- * state at init. Now that someone is really trying to enable
- * them, just ensure that the hwmod mux is set.
+ * state at init.
*/
if (oh->_int_flags & _HWMOD_SKIP_ENABLE) {
- /*
- * If the caller has mux data populated, do the mux'ing
- * which wouldn't have been done as part of the _enable()
- * done during setup.
- */
- if (oh->mux)
- omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
-
oh->_int_flags &= ~_HWMOD_SKIP_ENABLE;
return 0;
}
@@ -2145,16 +2064,6 @@ static int _enable(struct omap_hwmod *oh)
if (_are_all_hardreset_lines_asserted(oh))
return 0;
- /* Mux pins for device runtime if populated */
- if (oh->mux && (!oh->mux->enabled ||
- ((oh->_state == _HWMOD_STATE_IDLE) &&
- oh->mux->pads_dynamic))) {
- omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
- _reconfigure_io_chain();
- } else if (oh->flags & HWMOD_RECONFIG_IO_CHAIN) {
- _reconfigure_io_chain();
- }
-
_add_initiator_dep(oh, mpu_oh);
if (oh->clkdm) {
@@ -2260,14 +2169,6 @@ static int _idle(struct omap_hwmod *oh)
clkdm_hwmod_disable(oh->clkdm, oh);
}
- /* Mux pins for device idle if populated */
- if (oh->mux && oh->mux->pads_dynamic) {
- omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
- _reconfigure_io_chain();
- } else if (oh->flags & HWMOD_RECONFIG_IO_CHAIN) {
- _reconfigure_io_chain();
- }
-
oh->_state = _HWMOD_STATE_IDLE;
return 0;
@@ -2334,10 +2235,6 @@ static int _shutdown(struct omap_hwmod *oh)
for (i = 0; i < oh->rst_lines_cnt; i++)
_assert_hardreset(oh, oh->rst_lines[i].name);
- /* Mux pins to safe mode or use populated off mode values */
- if (oh->mux)
- omap_hwmod_mux(oh->mux, _HWMOD_STATE_DISABLED);
-
oh->_state = _HWMOD_STATE_DISABLED;
return 0;
@@ -3729,7 +3626,6 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
_write_sysconfig(v, oh);
}
- _set_idle_ioring_wakeup(oh, true);
spin_unlock_irqrestore(&oh->_lock, flags);
return 0;
@@ -3762,7 +3658,6 @@ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
_write_sysconfig(v, oh);
}
- _set_idle_ioring_wakeup(oh, false);
spin_unlock_irqrestore(&oh->_lock, flags);
return 0;
--
2.10.2
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 10/14] ARM: OMAP2+: Remove legacy data from hwmod for omap3
2016-11-11 19:16 [PATCH 00/14] Drop some unused omap platform_data Tony Lindgren
` (7 preceding siblings ...)
2016-11-11 19:17 ` [PATCH 08/14] ARM: OMAP2+: Remove legacy hwmod mux code Tony Lindgren
@ 2016-11-11 19:17 ` Tony Lindgren
2017-02-14 16:59 ` Adam Ford
2016-11-11 19:17 ` [PATCH 11/14] ARM: OMAP2+: Remove legacy smsc911x and smc91x GPMC support Tony Lindgren
` (3 subsequent siblings)
12 siblings, 1 reply; 18+ messages in thread
From: Tony Lindgren @ 2016-11-11 19:17 UTC (permalink / raw)
To: linux-arm-kernel
This data is now coming from device tree so we can remove the
duplicate data. Let's keep the DSS and DMA related things for now
until those have been converted to device tree completely.
While at it, let's also add the trailing commas to data structures
so further processing with scripts will be a bit easier.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
.../omap_hwmod_2xxx_3xxx_interconnect_data.c | 149 +---
.../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 201 +-----
.../mach-omap2/omap_hwmod_2xxx_interconnect_data.c | 4 -
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 1 -
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 787 +--------------------
arch/arm/mach-omap2/omap_hwmod_common_data.h | 15 -
6 files changed, 43 insertions(+), 1114 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
@@ -17,156 +17,11 @@
#include "omap_hwmod_common_data.h"
-struct omap_hwmod_addr_space omap2430_mmc1_addr_space[] = {
- {
- .pa_start = 0x4809c000,
- .pa_end = 0x4809c1ff,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
-
-struct omap_hwmod_addr_space omap2430_mmc2_addr_space[] = {
- {
- .pa_start = 0x480b4000,
- .pa_end = 0x480b41ff,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
-
-struct omap_hwmod_addr_space omap2_i2c1_addr_space[] = {
- {
- .pa_start = 0x48070000,
- .pa_end = 0x48070000 + SZ_128 - 1,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
-
-struct omap_hwmod_addr_space omap2_i2c2_addr_space[] = {
- {
- .pa_start = 0x48072000,
- .pa_end = 0x48072000 + SZ_128 - 1,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
-
-struct omap_hwmod_addr_space omap2_dss_addrs[] = {
- {
- .pa_start = 0x48050000,
- .pa_end = 0x48050000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-struct omap_hwmod_addr_space omap2_dss_dispc_addrs[] = {
- {
- .pa_start = 0x48050400,
- .pa_end = 0x48050400 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-struct omap_hwmod_addr_space omap2_dss_rfbi_addrs[] = {
- {
- .pa_start = 0x48050800,
- .pa_end = 0x48050800 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-struct omap_hwmod_addr_space omap2_dss_venc_addrs[] = {
- {
- .pa_start = 0x48050C00,
- .pa_end = 0x48050C00 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-struct omap_hwmod_addr_space omap2_timer10_addrs[] = {
- {
- .pa_start = 0x48086000,
- .pa_end = 0x48086000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-struct omap_hwmod_addr_space omap2_timer11_addrs[] = {
- {
- .pa_start = 0x48088000,
- .pa_end = 0x48088000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-struct omap_hwmod_addr_space omap2xxx_timer12_addrs[] = {
- {
- .pa_start = 0x4808a000,
- .pa_end = 0x4808a000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-struct omap_hwmod_addr_space omap2_mcspi1_addr_space[] = {
- {
- .pa_start = 0x48098000,
- .pa_end = 0x48098000 + SZ_256 - 1,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
-
-struct omap_hwmod_addr_space omap2_mcspi2_addr_space[] = {
- {
- .pa_start = 0x4809a000,
- .pa_end = 0x4809a000 + SZ_256 - 1,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
-
-struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[] = {
- {
- .pa_start = 0x480b8000,
- .pa_end = 0x480b8000 + SZ_256 - 1,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
-
struct omap_hwmod_addr_space omap2_dma_system_addrs[] = {
{
.pa_start = 0x48056000,
.pa_end = 0x48056000 + SZ_4K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-struct omap_hwmod_addr_space omap2_mcbsp1_addrs[] = {
- {
- .name = "mpu",
- .pa_start = 0x48074000,
- .pa_end = 0x480740ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-struct omap_hwmod_addr_space omap2_hdq1w_addr_space[] = {
- {
- .pa_start = 0x480b2000,
- .pa_end = 0x480b2fff,
- .flags = ADDR_TYPE_RT,
+ .flags = ADDR_TYPE_RT,
},
- { }
+ { },
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -45,204 +45,31 @@ struct omap_hwmod_class omap2_venc_hwmod_class = {
.name = "venc",
};
-
-/* Common DMA request line data */
-struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[] = {
- { .name = "rx", .dma_req = 50, },
- { .name = "tx", .dma_req = 49, },
- { .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_uart2_sdma_reqs[] = {
- { .name = "rx", .dma_req = 52, },
- { .name = "tx", .dma_req = 51, },
- { .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_uart3_sdma_reqs[] = {
- { .name = "rx", .dma_req = 54, },
- { .name = "tx", .dma_req = 53, },
- { .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_i2c1_sdma_reqs[] = {
- { .name = "tx", .dma_req = 27 },
- { .name = "rx", .dma_req = 28 },
- { .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_i2c2_sdma_reqs[] = {
- { .name = "tx", .dma_req = 29 },
- { .name = "rx", .dma_req = 30 },
- { .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_mcspi1_sdma_reqs[] = {
- { .name = "tx0", .dma_req = 35 }, /* DMA_SPI1_TX0 */
- { .name = "rx0", .dma_req = 36 }, /* DMA_SPI1_RX0 */
- { .name = "tx1", .dma_req = 37 }, /* DMA_SPI1_TX1 */
- { .name = "rx1", .dma_req = 38 }, /* DMA_SPI1_RX1 */
- { .name = "tx2", .dma_req = 39 }, /* DMA_SPI1_TX2 */
- { .name = "rx2", .dma_req = 40 }, /* DMA_SPI1_RX2 */
- { .name = "tx3", .dma_req = 41 }, /* DMA_SPI1_TX3 */
- { .name = "rx3", .dma_req = 42 }, /* DMA_SPI1_RX3 */
- { .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_mcspi2_sdma_reqs[] = {
- { .name = "tx0", .dma_req = 43 }, /* DMA_SPI2_TX0 */
- { .name = "rx0", .dma_req = 44 }, /* DMA_SPI2_RX0 */
- { .name = "tx1", .dma_req = 45 }, /* DMA_SPI2_TX1 */
- { .name = "rx1", .dma_req = 46 }, /* DMA_SPI2_RX1 */
- { .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_mcbsp1_sdma_reqs[] = {
- { .name = "rx", .dma_req = 32 },
- { .name = "tx", .dma_req = 31 },
- { .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_mcbsp2_sdma_reqs[] = {
- { .name = "rx", .dma_req = 34 },
- { .name = "tx", .dma_req = 33 },
- { .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_mcbsp3_sdma_reqs[] = {
- { .name = "rx", .dma_req = 18 },
- { .name = "tx", .dma_req = 17 },
- { .dma_req = -1 }
-};
-
-/* Other IP block data */
-
-
/*
* omap_hwmod class data
*/
struct omap_hwmod_class l3_hwmod_class = {
- .name = "l3"
+ .name = "l3",
};
struct omap_hwmod_class l4_hwmod_class = {
- .name = "l4"
+ .name = "l4",
};
struct omap_hwmod_class mpu_hwmod_class = {
- .name = "mpu"
+ .name = "mpu",
};
struct omap_hwmod_class iva_hwmod_class = {
- .name = "iva"
+ .name = "iva",
};
/* Common MPU IRQ line data */
-struct omap_hwmod_irq_info omap2_timer1_mpu_irqs[] = {
- { .irq = 37 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer2_mpu_irqs[] = {
- { .irq = 38 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer3_mpu_irqs[] = {
- { .irq = 39 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer4_mpu_irqs[] = {
- { .irq = 40 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer5_mpu_irqs[] = {
- { .irq = 41 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer6_mpu_irqs[] = {
- { .irq = 42 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer7_mpu_irqs[] = {
- { .irq = 43 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer8_mpu_irqs[] = {
- { .irq = 44 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer9_mpu_irqs[] = {
- { .irq = 45 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer10_mpu_irqs[] = {
- { .irq = 46 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer11_mpu_irqs[] = {
- { .irq = 47 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[] = {
- { .irq = 72 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_uart2_mpu_irqs[] = {
- { .irq = 73 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[] = {
- { .irq = 74 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
struct omap_hwmod_irq_info omap2_dispc_irqs[] = {
{ .irq = 25 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[] = {
- { .irq = 56 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[] = {
- { .irq = 57 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_gpio1_irqs[] = {
- { .irq = 29 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK1 */
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_gpio2_irqs[] = {
- { .irq = 30 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK2 */
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_gpio3_irqs[] = {
- { .irq = 31 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK3 */
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_gpio4_irqs[] = {
- { .irq = 32 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK4 */
- { .irq = -1 },
+ { .irq = -1, },
};
struct omap_hwmod_irq_info omap2_dma_system_irqs[] = {
@@ -250,17 +77,7 @@ struct omap_hwmod_irq_info omap2_dma_system_irqs[] = {
{ .name = "1", .irq = 13 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ1 */
{ .name = "2", .irq = 14 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ2 */
{ .name = "3", .irq = 15 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ3 */
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[] = {
- { .irq = 65 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[] = {
- { .irq = 66 + OMAP_INTC_START, },
- { .irq = -1 },
+ { .irq = -1, },
};
struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = {
@@ -277,9 +94,3 @@ struct omap_hwmod_class omap2_hdq1w_class = {
.sysc = &omap2_hdq1w_sysc,
.reset = &omap_hdq1w_reset,
};
-
-struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[] = {
- { .irq = 58 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
@@ -191,7 +191,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_dss_core_hwmod,
.clk = "dss_ick",
- .addr = omap2_dss_addrs,
.fw = {
.omap2 = {
.l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
@@ -206,7 +205,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_dss_dispc_hwmod,
.clk = "dss_ick",
- .addr = omap2_dss_dispc_addrs,
.fw = {
.omap2 = {
.l4_fw_region = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION,
@@ -221,7 +219,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_dss_rfbi_hwmod,
.clk = "dss_ick",
- .addr = omap2_dss_rfbi_addrs,
.fw = {
.omap2 = {
.l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
@@ -236,7 +233,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_dss_venc_hwmod,
.clk = "dss_ick",
- .addr = omap2_dss_venc_addrs,
.fw = {
.omap2 = {
.l4_fw_region = OMAP2420_L4_CORE_FW_DSS_VENC_REGION,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -569,7 +569,6 @@ struct omap_hwmod omap2xxx_dss_core_hwmod = {
struct omap_hwmod omap2xxx_dss_dispc_hwmod = {
.name = "dss_dispc",
.class = &omap2_dispc_hwmod_class,
- .mpu_irqs = omap2_dispc_irqs,
.main_clk = "dss1_fck",
.prcm = {
.omap2 = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -53,16 +53,10 @@
*/
/* L3 */
-static struct omap_hwmod_irq_info omap3xxx_l3_main_irqs[] = {
- { .irq = 9 + OMAP_INTC_START, },
- { .irq = 10 + OMAP_INTC_START, },
- { .irq = -1 },
-};
static struct omap_hwmod omap3xxx_l3_main_hwmod = {
.name = "l3_main",
.class = &l3_hwmod_class,
- .mpu_irqs = omap3xxx_l3_main_irqs,
.flags = HWMOD_NO_IDLEST,
};
@@ -95,14 +89,9 @@ static struct omap_hwmod omap3xxx_l4_sec_hwmod = {
};
/* MPU */
-static struct omap_hwmod_irq_info omap3xxx_mpu_irqs[] = {
- { .name = "pmu", .irq = 3 + OMAP_INTC_START },
- { .irq = -1 }
-};
static struct omap_hwmod omap3xxx_mpu_hwmod = {
.name = "mpu",
- .mpu_irqs = omap3xxx_mpu_irqs,
.class = &mpu_hwmod_class,
.main_clk = "arm_fck",
};
@@ -128,7 +117,7 @@ static struct omap_hwmod omap3xxx_iva_hwmod = {
.module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT,
- }
+ },
},
};
@@ -197,7 +186,6 @@ static struct omap_timer_capability_dev_attr capability_dsp_pwm_dev_attr = {
/* timer1 */
static struct omap_hwmod omap3xxx_timer1_hwmod = {
.name = "timer1",
- .mpu_irqs = omap2_timer1_mpu_irqs,
.main_clk = "gpt1_fck",
.prcm = {
.omap2 = {
@@ -216,7 +204,6 @@ static struct omap_hwmod omap3xxx_timer1_hwmod = {
/* timer2 */
static struct omap_hwmod omap3xxx_timer2_hwmod = {
.name = "timer2",
- .mpu_irqs = omap2_timer2_mpu_irqs,
.main_clk = "gpt2_fck",
.prcm = {
.omap2 = {
@@ -234,7 +221,6 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = {
/* timer3 */
static struct omap_hwmod omap3xxx_timer3_hwmod = {
.name = "timer3",
- .mpu_irqs = omap2_timer3_mpu_irqs,
.main_clk = "gpt3_fck",
.prcm = {
.omap2 = {
@@ -252,7 +238,6 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = {
/* timer4 */
static struct omap_hwmod omap3xxx_timer4_hwmod = {
.name = "timer4",
- .mpu_irqs = omap2_timer4_mpu_irqs,
.main_clk = "gpt4_fck",
.prcm = {
.omap2 = {
@@ -270,7 +255,6 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = {
/* timer5 */
static struct omap_hwmod omap3xxx_timer5_hwmod = {
.name = "timer5",
- .mpu_irqs = omap2_timer5_mpu_irqs,
.main_clk = "gpt5_fck",
.prcm = {
.omap2 = {
@@ -289,7 +273,6 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = {
/* timer6 */
static struct omap_hwmod omap3xxx_timer6_hwmod = {
.name = "timer6",
- .mpu_irqs = omap2_timer6_mpu_irqs,
.main_clk = "gpt6_fck",
.prcm = {
.omap2 = {
@@ -308,7 +291,6 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = {
/* timer7 */
static struct omap_hwmod omap3xxx_timer7_hwmod = {
.name = "timer7",
- .mpu_irqs = omap2_timer7_mpu_irqs,
.main_clk = "gpt7_fck",
.prcm = {
.omap2 = {
@@ -327,7 +309,6 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = {
/* timer8 */
static struct omap_hwmod omap3xxx_timer8_hwmod = {
.name = "timer8",
- .mpu_irqs = omap2_timer8_mpu_irqs,
.main_clk = "gpt8_fck",
.prcm = {
.omap2 = {
@@ -346,7 +327,6 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = {
/* timer9 */
static struct omap_hwmod omap3xxx_timer9_hwmod = {
.name = "timer9",
- .mpu_irqs = omap2_timer9_mpu_irqs,
.main_clk = "gpt9_fck",
.prcm = {
.omap2 = {
@@ -365,7 +345,6 @@ static struct omap_hwmod omap3xxx_timer9_hwmod = {
/* timer10 */
static struct omap_hwmod omap3xxx_timer10_hwmod = {
.name = "timer10",
- .mpu_irqs = omap2_timer10_mpu_irqs,
.main_clk = "gpt10_fck",
.prcm = {
.omap2 = {
@@ -384,7 +363,6 @@ static struct omap_hwmod omap3xxx_timer10_hwmod = {
/* timer11 */
static struct omap_hwmod omap3xxx_timer11_hwmod = {
.name = "timer11",
- .mpu_irqs = omap2_timer11_mpu_irqs,
.main_clk = "gpt11_fck",
.prcm = {
.omap2 = {
@@ -401,14 +379,9 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = {
};
/* timer12 */
-static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = {
- { .irq = 95 + OMAP_INTC_START, },
- { .irq = -1 },
-};
static struct omap_hwmod omap3xxx_timer12_hwmod = {
.name = "timer12",
- .mpu_irqs = omap3xxx_timer12_mpu_irqs,
.main_clk = "gpt12_fck",
.prcm = {
.omap2 = {
@@ -485,8 +458,6 @@ static struct omap_hwmod omap3xxx_wd_timer2_hwmod = {
/* UART1 */
static struct omap_hwmod omap3xxx_uart1_hwmod = {
.name = "uart1",
- .mpu_irqs = omap2_uart1_mpu_irqs,
- .sdma_reqs = omap2_uart1_sdma_reqs,
.main_clk = "uart1_fck",
.flags = DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE,
.prcm = {
@@ -504,8 +475,6 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = {
/* UART2 */
static struct omap_hwmod omap3xxx_uart2_hwmod = {
.name = "uart2",
- .mpu_irqs = omap2_uart2_mpu_irqs,
- .sdma_reqs = omap2_uart2_sdma_reqs,
.main_clk = "uart2_fck",
.flags = DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE,
.prcm = {
@@ -523,8 +492,6 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = {
/* UART3 */
static struct omap_hwmod omap3xxx_uart3_hwmod = {
.name = "uart3",
- .mpu_irqs = omap2_uart3_mpu_irqs,
- .sdma_reqs = omap2_uart3_sdma_reqs,
.main_clk = "uart3_fck",
.flags = DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS |
HWMOD_SWSUP_SIDLE,
@@ -541,21 +508,10 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = {
};
/* UART4 */
-static struct omap_hwmod_irq_info uart4_mpu_irqs[] = {
- { .irq = 80 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-static struct omap_hwmod_dma_info uart4_sdma_reqs[] = {
- { .name = "rx", .dma_req = 82, },
- { .name = "tx", .dma_req = 81, },
- { .dma_req = -1 }
-};
static struct omap_hwmod omap36xx_uart4_hwmod = {
.name = "uart4",
- .mpu_irqs = uart4_mpu_irqs,
- .sdma_reqs = uart4_sdma_reqs,
.main_clk = "uart4_fck",
.flags = DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE,
.prcm = {
@@ -570,16 +526,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = {
.class = &omap2_uart_class,
};
-static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = {
- { .irq = 84 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
- { .name = "rx", .dma_req = 55, },
- { .name = "tx", .dma_req = 54, },
- { .dma_req = -1 }
-};
/*
* XXX AM35xx UART4 cannot complete its softreset without uart1_fck or
@@ -597,8 +544,6 @@ static struct omap_hwmod_opt_clk am35xx_uart4_opt_clks[] = {
static struct omap_hwmod am35xx_uart4_hwmod = {
.name = "uart4",
- .mpu_irqs = am35xx_uart4_mpu_irqs,
- .sdma_reqs = am35xx_uart4_sdma_reqs,
.main_clk = "uart4_fck",
.prcm = {
.omap2 = {
@@ -625,7 +570,7 @@ static struct omap_hwmod_class i2c_class = {
static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = {
{ .name = "dispc", .dma_req = 5 },
{ .name = "dsi1", .dma_req = 74 },
- { .dma_req = -1 }
+ { .dma_req = -1, },
};
/* dss */
@@ -714,7 +659,7 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
},
},
.flags = HWMOD_NO_IDLEST,
- .dev_attr = &omap2_3_dss_dispc_dev_attr
+ .dev_attr = &omap2_3_dss_dispc_dev_attr,
};
/*
@@ -738,11 +683,6 @@ static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
.sysc = &omap3xxx_dsi_sysc,
};
-static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
- { .irq = 25 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
/* dss_dsi1 */
static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
@@ -751,7 +691,6 @@ static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
.name = "dss_dsi1",
.class = &omap3xxx_dsi_hwmod_class,
- .mpu_irqs = omap3xxx_dsi1_irqs,
.main_clk = "dss1_alwon_fck",
.prcm = {
.omap2 = {
@@ -815,8 +754,6 @@ static struct omap_i2c_dev_attr i2c1_dev_attr = {
static struct omap_hwmod omap3xxx_i2c1_hwmod = {
.name = "i2c1",
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
- .mpu_irqs = omap2_i2c1_mpu_irqs,
- .sdma_reqs = omap2_i2c1_sdma_reqs,
.main_clk = "i2c1_fck",
.prcm = {
.omap2 = {
@@ -840,8 +777,6 @@ static struct omap_i2c_dev_attr i2c2_dev_attr = {
static struct omap_hwmod omap3xxx_i2c2_hwmod = {
.name = "i2c2",
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
- .mpu_irqs = omap2_i2c2_mpu_irqs,
- .sdma_reqs = omap2_i2c2_sdma_reqs,
.main_clk = "i2c2_fck",
.prcm = {
.omap2 = {
@@ -862,22 +797,11 @@ static struct omap_i2c_dev_attr i2c3_dev_attr = {
.flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
};
-static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
- { .irq = 61 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = {
- { .name = "tx", .dma_req = 25 },
- { .name = "rx", .dma_req = 26 },
- { .dma_req = -1 }
-};
static struct omap_hwmod omap3xxx_i2c3_hwmod = {
.name = "i2c3",
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
- .mpu_irqs = i2c3_mpu_irqs,
- .sdma_reqs = i2c3_sdma_reqs,
.main_clk = "i2c3_fck",
.prcm = {
.omap2 = {
@@ -928,7 +852,6 @@ static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
static struct omap_hwmod omap3xxx_gpio1_hwmod = {
.name = "gpio1",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2_gpio1_irqs,
.main_clk = "gpio1_ick",
.opt_clks = gpio1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks),
@@ -953,7 +876,6 @@ static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
static struct omap_hwmod omap3xxx_gpio2_hwmod = {
.name = "gpio2",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2_gpio2_irqs,
.main_clk = "gpio2_ick",
.opt_clks = gpio2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks),
@@ -978,7 +900,6 @@ static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
static struct omap_hwmod omap3xxx_gpio3_hwmod = {
.name = "gpio3",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2_gpio3_irqs,
.main_clk = "gpio3_ick",
.opt_clks = gpio3_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks),
@@ -1003,7 +924,6 @@ static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
static struct omap_hwmod omap3xxx_gpio4_hwmod = {
.name = "gpio4",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2_gpio4_irqs,
.main_clk = "gpio4_ick",
.opt_clks = gpio4_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks),
@@ -1021,10 +941,6 @@ static struct omap_hwmod omap3xxx_gpio4_hwmod = {
};
/* gpio5 */
-static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = {
- { .irq = 33 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK5 */
- { .irq = -1 },
-};
static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio5_dbck", },
@@ -1033,7 +949,6 @@ static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
static struct omap_hwmod omap3xxx_gpio5_hwmod = {
.name = "gpio5",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap3xxx_gpio5_irqs,
.main_clk = "gpio5_ick",
.opt_clks = gpio5_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks),
@@ -1051,10 +966,6 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = {
};
/* gpio6 */
-static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = {
- { .irq = 34 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK6 */
- { .irq = -1 },
-};
static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio6_dbck", },
@@ -1063,7 +974,6 @@ static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
static struct omap_hwmod omap3xxx_gpio6_hwmod = {
.name = "gpio6",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap3xxx_gpio6_irqs,
.main_clk = "gpio6_ick",
.opt_clks = gpio6_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks),
@@ -1156,18 +1066,10 @@ static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = {
};
/* mcbsp1 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = {
- { .name = "common", .irq = 16 + OMAP_INTC_START, },
- { .name = "tx", .irq = 59 + OMAP_INTC_START, },
- { .name = "rx", .irq = 60 + OMAP_INTC_START, },
- { .irq = -1 },
-};
static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
.name = "mcbsp1",
.class = &omap3xxx_mcbsp_hwmod_class,
- .mpu_irqs = omap3xxx_mcbsp1_irqs,
- .sdma_reqs = omap2_mcbsp1_sdma_reqs,
.main_clk = "mcbsp1_fck",
.prcm = {
.omap2 = {
@@ -1183,12 +1085,6 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
};
/* mcbsp2 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = {
- { .name = "common", .irq = 17 + OMAP_INTC_START, },
- { .name = "tx", .irq = 62 + OMAP_INTC_START, },
- { .name = "rx", .irq = 63 + OMAP_INTC_START, },
- { .irq = -1 },
-};
static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = {
.sidetone = "mcbsp2_sidetone",
@@ -1197,8 +1093,6 @@ static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = {
static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
.name = "mcbsp2",
.class = &omap3xxx_mcbsp_hwmod_class,
- .mpu_irqs = omap3xxx_mcbsp2_irqs,
- .sdma_reqs = omap2_mcbsp2_sdma_reqs,
.main_clk = "mcbsp2_fck",
.prcm = {
.omap2 = {
@@ -1215,12 +1109,6 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
};
/* mcbsp3 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = {
- { .name = "common", .irq = 22 + OMAP_INTC_START, },
- { .name = "tx", .irq = 89 + OMAP_INTC_START, },
- { .name = "rx", .irq = 90 + OMAP_INTC_START, },
- { .irq = -1 },
-};
static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = {
.sidetone = "mcbsp3_sidetone",
@@ -1229,8 +1117,6 @@ static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = {
static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
.name = "mcbsp3",
.class = &omap3xxx_mcbsp_hwmod_class,
- .mpu_irqs = omap3xxx_mcbsp3_irqs,
- .sdma_reqs = omap2_mcbsp3_sdma_reqs,
.main_clk = "mcbsp3_fck",
.prcm = {
.omap2 = {
@@ -1247,24 +1133,11 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
};
/* mcbsp4 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = {
- { .name = "common", .irq = 23 + OMAP_INTC_START, },
- { .name = "tx", .irq = 54 + OMAP_INTC_START, },
- { .name = "rx", .irq = 55 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = {
- { .name = "rx", .dma_req = 20 },
- { .name = "tx", .dma_req = 19 },
- { .dma_req = -1 }
-};
static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
.name = "mcbsp4",
.class = &omap3xxx_mcbsp_hwmod_class,
- .mpu_irqs = omap3xxx_mcbsp4_irqs,
- .sdma_reqs = omap3xxx_mcbsp4_sdma_chs,
.main_clk = "mcbsp4_fck",
.prcm = {
.omap2 = {
@@ -1280,24 +1153,11 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
};
/* mcbsp5 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = {
- { .name = "common", .irq = 27 + OMAP_INTC_START, },
- { .name = "tx", .irq = 81 + OMAP_INTC_START, },
- { .name = "rx", .irq = 82 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = {
- { .name = "rx", .dma_req = 22 },
- { .name = "tx", .dma_req = 21 },
- { .dma_req = -1 }
-};
static struct omap_hwmod omap3xxx_mcbsp5_hwmod = {
.name = "mcbsp5",
.class = &omap3xxx_mcbsp_hwmod_class,
- .mpu_irqs = omap3xxx_mcbsp5_irqs,
- .sdma_reqs = omap3xxx_mcbsp5_sdma_chs,
.main_clk = "mcbsp5_fck",
.prcm = {
.omap2 = {
@@ -1325,29 +1185,19 @@ static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = {
};
/* mcbsp2_sidetone */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = {
- { .name = "irq", .irq = 4 + OMAP_INTC_START, },
- { .irq = -1 },
-};
static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
.name = "mcbsp2_sidetone",
.class = &omap3xxx_mcbsp_sidetone_hwmod_class,
- .mpu_irqs = omap3xxx_mcbsp2_sidetone_irqs,
.main_clk = "mcbsp2_ick",
.flags = HWMOD_NO_IDLEST,
};
/* mcbsp3_sidetone */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = {
- { .name = "irq", .irq = 5 + OMAP_INTC_START, },
- { .irq = -1 },
-};
static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
.name = "mcbsp3_sidetone",
.class = &omap3xxx_mcbsp_sidetone_hwmod_class,
- .mpu_irqs = omap3xxx_mcbsp3_sidetone_irqs,
.main_clk = "mcbsp3_ick",
.flags = HWMOD_NO_IDLEST,
};
@@ -1394,10 +1244,6 @@ static struct omap_smartreflex_dev_attr sr1_dev_attr = {
.sensor_voltdm_name = "mpu_iva",
};
-static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
- { .irq = 18 + OMAP_INTC_START, },
- { .irq = -1 },
-};
static struct omap_hwmod omap34xx_sr1_hwmod = {
.name = "smartreflex_mpu_iva",
@@ -1413,7 +1259,6 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
},
},
.dev_attr = &sr1_dev_attr,
- .mpu_irqs = omap3_smartreflex_mpu_irqs,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -1431,7 +1276,6 @@ static struct omap_hwmod omap36xx_sr1_hwmod = {
},
},
.dev_attr = &sr1_dev_attr,
- .mpu_irqs = omap3_smartreflex_mpu_irqs,
};
/* SR2 */
@@ -1439,10 +1283,6 @@ static struct omap_smartreflex_dev_attr sr2_dev_attr = {
.sensor_voltdm_name = "core",
};
-static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
- { .irq = 19 + OMAP_INTC_START, },
- { .irq = -1 },
-};
static struct omap_hwmod omap34xx_sr2_hwmod = {
.name = "smartreflex_core",
@@ -1458,7 +1298,6 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
},
},
.dev_attr = &sr2_dev_attr,
- .mpu_irqs = omap3_smartreflex_core_irqs,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -1476,7 +1315,6 @@ static struct omap_hwmod omap36xx_sr2_hwmod = {
},
},
.dev_attr = &sr2_dev_attr,
- .mpu_irqs = omap3_smartreflex_core_irqs,
};
/*
@@ -1545,8 +1383,6 @@ static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
static struct omap_hwmod omap34xx_mcspi1 = {
.name = "mcspi1",
- .mpu_irqs = omap2_mcspi1_mpu_irqs,
- .sdma_reqs = omap2_mcspi1_sdma_reqs,
.main_clk = "mcspi1_fck",
.prcm = {
.omap2 = {
@@ -1568,8 +1404,6 @@ static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
static struct omap_hwmod omap34xx_mcspi2 = {
.name = "mcspi2",
- .mpu_irqs = omap2_mcspi2_mpu_irqs,
- .sdma_reqs = omap2_mcspi2_sdma_reqs,
.main_clk = "mcspi2_fck",
.prcm = {
.omap2 = {
@@ -1585,18 +1419,7 @@ static struct omap_hwmod omap34xx_mcspi2 = {
};
/* mcspi3 */
-static struct omap_hwmod_irq_info omap34xx_mcspi3_mpu_irqs[] = {
- { .name = "irq", .irq = 91 + OMAP_INTC_START, }, /* 91 */
- { .irq = -1 },
-};
-static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = {
- { .name = "tx0", .dma_req = 15 },
- { .name = "rx0", .dma_req = 16 },
- { .name = "tx1", .dma_req = 23 },
- { .name = "rx1", .dma_req = 24 },
- { .dma_req = -1 }
-};
static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
.num_chipselect = 2,
@@ -1604,8 +1427,6 @@ static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
static struct omap_hwmod omap34xx_mcspi3 = {
.name = "mcspi3",
- .mpu_irqs = omap34xx_mcspi3_mpu_irqs,
- .sdma_reqs = omap34xx_mcspi3_sdma_reqs,
.main_clk = "mcspi3_fck",
.prcm = {
.omap2 = {
@@ -1621,16 +1442,7 @@ static struct omap_hwmod omap34xx_mcspi3 = {
};
/* mcspi4 */
-static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = {
- { .name = "irq", .irq = 48 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = {
- { .name = "tx0", .dma_req = 70 }, /* DMA_SPI4_TX0 */
- { .name = "rx0", .dma_req = 71 }, /* DMA_SPI4_RX0 */
- { .dma_req = -1 }
-};
static struct omap2_mcspi_dev_attr omap_mcspi4_dev_attr = {
.num_chipselect = 1,
@@ -1638,8 +1450,6 @@ static struct omap2_mcspi_dev_attr omap_mcspi4_dev_attr = {
static struct omap_hwmod omap34xx_mcspi4 = {
.name = "mcspi4",
- .mpu_irqs = omap34xx_mcspi4_mpu_irqs,
- .sdma_reqs = omap34xx_mcspi4_sdma_reqs,
.main_clk = "mcspi4_fck",
.prcm = {
.omap2 = {
@@ -1673,16 +1483,9 @@ static struct omap_hwmod_class usbotg_class = {
};
/* usb_otg_hs */
-static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = {
-
- { .name = "mc", .irq = 92 + OMAP_INTC_START, },
- { .name = "dma", .irq = 93 + OMAP_INTC_START, },
- { .irq = -1 },
-};
static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
.name = "usb_otg_hs",
- .mpu_irqs = omap3xxx_usbhsotg_mpu_irqs,
.main_clk = "hsotgusb_ick",
.prcm = {
.omap2 = {
@@ -1691,7 +1494,7 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT,
- .idlest_stdby_bit = OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT
+ .idlest_stdby_bit = OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT,
},
},
.class = &usbotg_class,
@@ -1711,10 +1514,6 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
};
/* usb_otg_hs */
-static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = {
- { .name = "mc", .irq = 71 + OMAP_INTC_START, },
- { .irq = -1 },
-};
static struct omap_hwmod_class am35xx_usbotg_class = {
.name = "am35xx_usbotg",
@@ -1722,7 +1521,6 @@ static struct omap_hwmod_class am35xx_usbotg_class = {
static struct omap_hwmod am35xx_usbhsotg_hwmod = {
.name = "am35x_otg_hs",
- .mpu_irqs = am35xx_usbhsotg_mpu_irqs,
.main_clk = "hsotgusb_fck",
.class = &am35xx_usbotg_class,
.flags = HWMOD_NO_IDLEST,
@@ -1747,16 +1545,7 @@ static struct omap_hwmod_class omap34xx_mmc_class = {
/* MMC/SD/SDIO1 */
-static struct omap_hwmod_irq_info omap34xx_mmc1_mpu_irqs[] = {
- { .irq = 83 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-static struct omap_hwmod_dma_info omap34xx_mmc1_sdma_reqs[] = {
- { .name = "tx", .dma_req = 61, },
- { .name = "rx", .dma_req = 62, },
- { .dma_req = -1 }
-};
static struct omap_hwmod_opt_clk omap34xx_mmc1_opt_clks[] = {
{ .role = "dbck", .clk = "omap_32k_fck", },
@@ -1774,8 +1563,6 @@ static struct omap_hsmmc_dev_attr mmc1_pre_es3_dev_attr = {
static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = {
.name = "mmc1",
- .mpu_irqs = omap34xx_mmc1_mpu_irqs,
- .sdma_reqs = omap34xx_mmc1_sdma_reqs,
.opt_clks = omap34xx_mmc1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks),
.main_clk = "mmchs1_fck",
@@ -1794,8 +1581,6 @@ static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = {
static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = {
.name = "mmc1",
- .mpu_irqs = omap34xx_mmc1_mpu_irqs,
- .sdma_reqs = omap34xx_mmc1_sdma_reqs,
.opt_clks = omap34xx_mmc1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks),
.main_clk = "mmchs1_fck",
@@ -1814,16 +1599,7 @@ static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = {
/* MMC/SD/SDIO2 */
-static struct omap_hwmod_irq_info omap34xx_mmc2_mpu_irqs[] = {
- { .irq = 86 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-static struct omap_hwmod_dma_info omap34xx_mmc2_sdma_reqs[] = {
- { .name = "tx", .dma_req = 47, },
- { .name = "rx", .dma_req = 48, },
- { .dma_req = -1 }
-};
static struct omap_hwmod_opt_clk omap34xx_mmc2_opt_clks[] = {
{ .role = "dbck", .clk = "omap_32k_fck", },
@@ -1836,8 +1612,6 @@ static struct omap_hsmmc_dev_attr mmc2_pre_es3_dev_attr = {
static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = {
.name = "mmc2",
- .mpu_irqs = omap34xx_mmc2_mpu_irqs,
- .sdma_reqs = omap34xx_mmc2_sdma_reqs,
.opt_clks = omap34xx_mmc2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks),
.main_clk = "mmchs2_fck",
@@ -1856,8 +1630,6 @@ static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = {
static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
.name = "mmc2",
- .mpu_irqs = omap34xx_mmc2_mpu_irqs,
- .sdma_reqs = omap34xx_mmc2_sdma_reqs,
.opt_clks = omap34xx_mmc2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks),
.main_clk = "mmchs2_fck",
@@ -1875,16 +1647,7 @@ static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
/* MMC/SD/SDIO3 */
-static struct omap_hwmod_irq_info omap34xx_mmc3_mpu_irqs[] = {
- { .irq = 94 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-static struct omap_hwmod_dma_info omap34xx_mmc3_sdma_reqs[] = {
- { .name = "tx", .dma_req = 77, },
- { .name = "rx", .dma_req = 78, },
- { .dma_req = -1 }
-};
static struct omap_hwmod_opt_clk omap34xx_mmc3_opt_clks[] = {
{ .role = "dbck", .clk = "omap_32k_fck", },
@@ -1892,8 +1655,6 @@ static struct omap_hwmod_opt_clk omap34xx_mmc3_opt_clks[] = {
static struct omap_hwmod omap3xxx_mmc3_hwmod = {
.name = "mmc3",
- .mpu_irqs = omap34xx_mmc3_mpu_irqs,
- .sdma_reqs = omap34xx_mmc3_sdma_reqs,
.opt_clks = omap34xx_mmc3_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc3_opt_clks),
.main_clk = "mmchs3_fck",
@@ -1931,17 +1692,11 @@ static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = {
.sysc = &omap3xxx_usb_host_hs_sysc,
};
-static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
- { .name = "ohci-irq", .irq = 76 + OMAP_INTC_START, },
- { .name = "ehci-irq", .irq = 77 + OMAP_INTC_START, },
- { .irq = -1 },
-};
static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
.name = "usb_host_hs",
.class = &omap3xxx_usb_host_hs_hwmod_class,
.clkdm_name = "usbhost_clkdm",
- .mpu_irqs = omap3xxx_usb_host_hs_irqs,
.main_clk = "usbhost_48m_fck",
.prcm = {
.omap2 = {
@@ -2015,16 +1770,11 @@ static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = {
.sysc = &omap3xxx_usb_tll_hs_sysc,
};
-static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
- { .name = "tll-irq", .irq = 78 + OMAP_INTC_START, },
- { .irq = -1 },
-};
static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
.name = "usb_tll_hs",
.class = &omap3xxx_usb_tll_hs_hwmod_class,
.clkdm_name = "core_l4_clkdm",
- .mpu_irqs = omap3xxx_usb_tll_hs_irqs,
.main_clk = "usbtll_fck",
.prcm = {
.omap2 = {
@@ -2039,7 +1789,6 @@ static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
static struct omap_hwmod omap3xxx_hdq1w_hwmod = {
.name = "hdq1w",
- .mpu_irqs = omap2_hdq1w_mpu_irqs,
.main_clk = "hdq_fck",
.prcm = {
.omap2 = {
@@ -2134,16 +1883,10 @@ static struct omap_hwmod_class omap3xxx_gpmc_hwmod_class = {
.sysc = &omap3xxx_gpmc_sysc,
};
-static struct omap_hwmod_irq_info omap3xxx_gpmc_irqs[] = {
- { .irq = 20 + OMAP_INTC_START, },
- { .irq = -1 }
-};
-
static struct omap_hwmod omap3xxx_gpmc_hwmod = {
.name = "gpmc",
.class = &omap3xxx_gpmc_hwmod_class,
.clkdm_name = "core_l3_clkdm",
- .mpu_irqs = omap3xxx_gpmc_irqs,
.main_clk = "gpmc_fck",
/* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
.flags = HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS,
@@ -2167,37 +1910,19 @@ static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_per = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_l3_main_addrs[] = {
- {
- .pa_start = 0x68000000,
- .pa_end = 0x6800ffff,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
/* MPU -> L3 interface */
static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = {
.master = &omap3xxx_mpu_hwmod,
.slave = &omap3xxx_l3_main_hwmod,
- .addr = omap3xxx_l3_main_addrs,
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_addr_space omap3xxx_l4_emu_addrs[] = {
- {
- .pa_start = 0x54000000,
- .pa_end = 0x547fffff,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
/* l3 -> debugss */
static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_debugss = {
.master = &omap3xxx_l3_main_hwmod,
.slave = &omap3xxx_debugss_hwmod,
- .addr = omap3xxx_l4_emu_addrs,
.user = OCP_USER_MPU,
};
@@ -2215,7 +1940,7 @@ static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = {
.omap2 = {
.l3_perm_bit = OMAP3_L3_CORE_FW_INIT_ID_DSS,
.flags = OMAP_FIREWALL_L3,
- }
+ },
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -2256,18 +1981,16 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__pre_es3_mmc1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_pre_es3_mmc1_hwmod,
.clk = "mmchs1_ick",
- .addr = omap2430_mmc1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
- .flags = OMAP_FIREWALL_L4
+ .flags = OMAP_FIREWALL_L4,
};
static struct omap_hwmod_ocp_if omap3xxx_l4_core__es3plus_mmc1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_es3plus_mmc1_hwmod,
.clk = "mmchs1_ick",
- .addr = omap2430_mmc1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
- .flags = OMAP_FIREWALL_L4
+ .flags = OMAP_FIREWALL_L4,
};
/* L4 CORE -> MMC2 interface */
@@ -2275,126 +1998,70 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__pre_es3_mmc2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_pre_es3_mmc2_hwmod,
.clk = "mmchs2_ick",
- .addr = omap2430_mmc2_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
- .flags = OMAP_FIREWALL_L4
+ .flags = OMAP_FIREWALL_L4,
};
static struct omap_hwmod_ocp_if omap3xxx_l4_core__es3plus_mmc2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_es3plus_mmc2_hwmod,
.clk = "mmchs2_ick",
- .addr = omap2430_mmc2_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
- .flags = OMAP_FIREWALL_L4
+ .flags = OMAP_FIREWALL_L4,
};
/* L4 CORE -> MMC3 interface */
-static struct omap_hwmod_addr_space omap3xxx_mmc3_addr_space[] = {
- {
- .pa_start = 0x480ad000,
- .pa_end = 0x480ad1ff,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc3 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_mmc3_hwmod,
.clk = "mmchs3_ick",
- .addr = omap3xxx_mmc3_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
- .flags = OMAP_FIREWALL_L4
+ .flags = OMAP_FIREWALL_L4,
};
/* L4 CORE -> UART1 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = {
- {
- .pa_start = OMAP3_UART1_BASE,
- .pa_end = OMAP3_UART1_BASE + SZ_8K - 1,
- .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
- },
- { }
-};
static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_uart1_hwmod,
.clk = "uart1_ick",
- .addr = omap3xxx_uart1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> UART2 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart2_addr_space[] = {
- {
- .pa_start = OMAP3_UART2_BASE,
- .pa_end = OMAP3_UART2_BASE + SZ_1K - 1,
- .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
- },
- { }
-};
static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_uart2_hwmod,
.clk = "uart2_ick",
- .addr = omap3xxx_uart2_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 PER -> UART3 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart3_addr_space[] = {
- {
- .pa_start = OMAP3_UART3_BASE,
- .pa_end = OMAP3_UART3_BASE + SZ_1K - 1,
- .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
- },
- { }
-};
static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_uart3_hwmod,
.clk = "uart3_ick",
- .addr = omap3xxx_uart3_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 PER -> UART4 interface */
-static struct omap_hwmod_addr_space omap36xx_uart4_addr_space[] = {
- {
- .pa_start = OMAP3_UART4_BASE,
- .pa_end = OMAP3_UART4_BASE + SZ_1K - 1,
- .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
- },
- { }
-};
static struct omap_hwmod_ocp_if omap36xx_l4_per__uart4 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap36xx_uart4_hwmod,
.clk = "uart4_ick",
- .addr = omap36xx_uart4_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* AM35xx: L4 CORE -> UART4 interface */
-static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = {
- {
- .pa_start = OMAP3_UART4_AM35XX_BASE,
- .pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1,
- .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
- },
- { }
-};
static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &am35xx_uart4_hwmod,
.clk = "uart4_ick",
- .addr = am35xx_uart4_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -2403,13 +2070,12 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_i2c1_hwmod,
.clk = "i2c1_ick",
- .addr = omap2_i2c1_addr_space,
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_I2C1_REGION,
.l4_prot_group = 7,
.flags = OMAP_FIREWALL_L4,
- }
+ },
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -2419,57 +2085,38 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_i2c2_hwmod,
.clk = "i2c2_ick",
- .addr = omap2_i2c2_addr_space,
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_I2C2_REGION,
.l4_prot_group = 7,
.flags = OMAP_FIREWALL_L4,
- }
+ },
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> I2C3 interface */
-static struct omap_hwmod_addr_space omap3xxx_i2c3_addr_space[] = {
- {
- .pa_start = 0x48060000,
- .pa_end = 0x48060000 + SZ_128 - 1,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_i2c3_hwmod,
.clk = "i2c3_ick",
- .addr = omap3xxx_i2c3_addr_space,
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_I2C3_REGION,
.l4_prot_group = 7,
.flags = OMAP_FIREWALL_L4,
- }
+ },
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> SR1 interface */
-static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
- {
- .pa_start = OMAP34XX_SR1_BASE,
- .pa_end = OMAP34XX_SR1_BASE + SZ_1K - 1,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
static struct omap_hwmod_ocp_if omap34xx_l4_core__sr1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_sr1_hwmod,
.clk = "sr_l4_ick",
- .addr = omap3_sr1_addr_space,
.user = OCP_USER_MPU,
};
@@ -2477,25 +2124,15 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap36xx_sr1_hwmod,
.clk = "sr_l4_ick",
- .addr = omap3_sr1_addr_space,
.user = OCP_USER_MPU,
};
/* L4 CORE -> SR1 interface */
-static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = {
- {
- .pa_start = OMAP34XX_SR2_BASE,
- .pa_end = OMAP34XX_SR2_BASE + SZ_1K - 1,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
static struct omap_hwmod_ocp_if omap34xx_l4_core__sr2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_sr2_hwmod,
.clk = "sr_l4_ick",
- .addr = omap3_sr2_addr_space,
.user = OCP_USER_MPU,
};
@@ -2503,43 +2140,24 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap36xx_sr2_hwmod,
.clk = "sr_l4_ick",
- .addr = omap3_sr2_addr_space,
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_addr_space omap3xxx_usbhsotg_addrs[] = {
- {
- .pa_start = OMAP34XX_HSUSB_OTG_BASE,
- .pa_end = OMAP34XX_HSUSB_OTG_BASE + SZ_4K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_core -> usbhsotg */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_usbhsotg_hwmod,
.clk = "l4_ick",
- .addr = omap3xxx_usbhsotg_addrs,
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = {
- {
- .pa_start = AM35XX_IPSS_USBOTGSS_BASE,
- .pa_end = AM35XX_IPSS_USBOTGSS_BASE + SZ_4K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_core -> usbhsotg */
static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &am35xx_usbhsotg_hwmod,
.clk = "hsotgusb_ick",
- .addr = am35xx_usbhsotg_addrs,
.user = OCP_USER_MPU,
};
@@ -2558,165 +2176,84 @@ static struct omap_hwmod_ocp_if omap3xxx_l3__iva = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_timer1_addrs[] = {
- {
- .pa_start = 0x48318000,
- .pa_end = 0x48318000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_wkup -> timer1 */
static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__timer1 = {
.master = &omap3xxx_l4_wkup_hwmod,
.slave = &omap3xxx_timer1_hwmod,
.clk = "gpt1_ick",
- .addr = omap3xxx_timer1_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_timer2_addrs[] = {
- {
- .pa_start = 0x49032000,
- .pa_end = 0x49032000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_per -> timer2 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer2 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_timer2_hwmod,
.clk = "gpt2_ick",
- .addr = omap3xxx_timer2_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_timer3_addrs[] = {
- {
- .pa_start = 0x49034000,
- .pa_end = 0x49034000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_per -> timer3 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer3 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_timer3_hwmod,
.clk = "gpt3_ick",
- .addr = omap3xxx_timer3_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_timer4_addrs[] = {
- {
- .pa_start = 0x49036000,
- .pa_end = 0x49036000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_per -> timer4 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer4 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_timer4_hwmod,
.clk = "gpt4_ick",
- .addr = omap3xxx_timer4_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_timer5_addrs[] = {
- {
- .pa_start = 0x49038000,
- .pa_end = 0x49038000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_per -> timer5 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer5 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_timer5_hwmod,
.clk = "gpt5_ick",
- .addr = omap3xxx_timer5_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_timer6_addrs[] = {
- {
- .pa_start = 0x4903A000,
- .pa_end = 0x4903A000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_per -> timer6 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer6 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_timer6_hwmod,
.clk = "gpt6_ick",
- .addr = omap3xxx_timer6_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_timer7_addrs[] = {
- {
- .pa_start = 0x4903C000,
- .pa_end = 0x4903C000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_per -> timer7 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer7 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_timer7_hwmod,
.clk = "gpt7_ick",
- .addr = omap3xxx_timer7_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_timer8_addrs[] = {
- {
- .pa_start = 0x4903E000,
- .pa_end = 0x4903E000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_per -> timer8 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer8 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_timer8_hwmod,
.clk = "gpt8_ick",
- .addr = omap3xxx_timer8_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_timer9_addrs[] = {
- {
- .pa_start = 0x49040000,
- .pa_end = 0x49040000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_per -> timer9 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer9 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_timer9_hwmod,
.clk = "gpt9_ick",
- .addr = omap3xxx_timer9_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -2725,7 +2262,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer10 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_timer10_hwmod,
.clk = "gpt10_ick",
- .addr = omap2_timer10_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -2734,43 +2270,24 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer11 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_timer11_hwmod,
.clk = "gpt11_ick",
- .addr = omap2_timer11_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_timer12_addrs[] = {
- {
- .pa_start = 0x48304000,
- .pa_end = 0x48304000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_core -> timer12 */
static struct omap_hwmod_ocp_if omap3xxx_l4_sec__timer12 = {
.master = &omap3xxx_l4_sec_hwmod,
.slave = &omap3xxx_timer12_hwmod,
.clk = "gpt12_ick",
- .addr = omap3xxx_timer12_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> wd_timer2 */
-static struct omap_hwmod_addr_space omap3xxx_wd_timer2_addrs[] = {
- {
- .pa_start = 0x48314000,
- .pa_end = 0x4831407f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = {
.master = &omap3xxx_l4_wkup_hwmod,
.slave = &omap3xxx_wd_timer2_hwmod,
.clk = "wdt2_ick",
- .addr = omap3xxx_wd_timer2_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -2779,13 +2296,12 @@ static struct omap_hwmod_ocp_if omap3430es1_l4_core__dss = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3430es1_dss_core_hwmod,
.clk = "dss_ick",
- .addr = omap2_dss_addrs,
.fw = {
.omap2 = {
.l4_fw_region = OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION,
.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
.flags = OMAP_FIREWALL_L4,
- }
+ },
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -2794,13 +2310,12 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_core_hwmod,
.clk = "dss_ick",
- .addr = omap2_dss_addrs,
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_DSS_CORE_REGION,
.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
.flags = OMAP_FIREWALL_L4,
- }
+ },
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -2810,38 +2325,27 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_dispc_hwmod,
.clk = "dss_ick",
- .addr = omap2_dss_dispc_addrs,
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_DSS_DISPC_REGION,
.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
.flags = OMAP_FIREWALL_L4,
- }
+ },
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = {
- {
- .pa_start = 0x4804FC00,
- .pa_end = 0x4804FFFF,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
/* l4_core -> dss_dsi1 */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_dsi1_hwmod,
.clk = "dss_ick",
- .addr = omap3xxx_dss_dsi1_addrs,
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_DSS_DSI_REGION,
.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
.flags = OMAP_FIREWALL_L4,
- }
+ },
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -2851,13 +2355,12 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_rfbi = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_rfbi_hwmod,
.clk = "dss_ick",
- .addr = omap2_dss_rfbi_addrs,
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_DSS_RFBI_REGION,
.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP ,
.flags = OMAP_FIREWALL_L4,
- }
+ },
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -2867,66 +2370,38 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_venc_hwmod,
.clk = "dss_ick",
- .addr = omap2_dss_venc_addrs,
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_DSS_VENC_REGION,
.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
.flags = OMAP_FIREWALL_L4,
- }
+ },
},
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> gpio1 */
-static struct omap_hwmod_addr_space omap3xxx_gpio1_addrs[] = {
- {
- .pa_start = 0x48310000,
- .pa_end = 0x483101ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = {
.master = &omap3xxx_l4_wkup_hwmod,
.slave = &omap3xxx_gpio1_hwmod,
- .addr = omap3xxx_gpio1_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> gpio2 */
-static struct omap_hwmod_addr_space omap3xxx_gpio2_addrs[] = {
- {
- .pa_start = 0x49050000,
- .pa_end = 0x490501ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_gpio2_hwmod,
- .addr = omap3xxx_gpio2_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> gpio3 */
-static struct omap_hwmod_addr_space omap3xxx_gpio3_addrs[] = {
- {
- .pa_start = 0x49052000,
- .pa_end = 0x490521ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_gpio3_hwmod,
- .addr = omap3xxx_gpio3_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -3002,53 +2477,26 @@ static struct omap_hwmod omap3xxx_mmu_iva_hwmod = {
};
/* l4_per -> gpio4 */
-static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = {
- {
- .pa_start = 0x49054000,
- .pa_end = 0x490541ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_gpio4_hwmod,
- .addr = omap3xxx_gpio4_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> gpio5 */
-static struct omap_hwmod_addr_space omap3xxx_gpio5_addrs[] = {
- {
- .pa_start = 0x49056000,
- .pa_end = 0x490561ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_gpio5_hwmod,
- .addr = omap3xxx_gpio5_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> gpio6 */
-static struct omap_hwmod_addr_space omap3xxx_gpio6_addrs[] = {
- {
- .pa_start = 0x49058000,
- .pa_end = 0x490581ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_gpio6_hwmod,
- .addr = omap3xxx_gpio6_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -3064,9 +2512,9 @@ static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
{
.pa_start = 0x48056000,
.pa_end = 0x48056fff,
- .flags = ADDR_TYPE_RT
+ .flags = ADDR_TYPE_RT,
},
- { }
+ { },
};
/* l4_cfg -> dma_system */
@@ -3078,136 +2526,66 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_mcbsp1_addrs[] = {
- {
- .name = "mpu",
- .pa_start = 0x48074000,
- .pa_end = 0x480740ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_core -> mcbsp1 */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_mcbsp1_hwmod,
.clk = "mcbsp1_ick",
- .addr = omap3xxx_mcbsp1_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_mcbsp2_addrs[] = {
- {
- .name = "mpu",
- .pa_start = 0x49022000,
- .pa_end = 0x490220ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_per -> mcbsp2 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_mcbsp2_hwmod,
.clk = "mcbsp2_ick",
- .addr = omap3xxx_mcbsp2_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_mcbsp3_addrs[] = {
- {
- .name = "mpu",
- .pa_start = 0x49024000,
- .pa_end = 0x490240ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_per -> mcbsp3 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_mcbsp3_hwmod,
.clk = "mcbsp3_ick",
- .addr = omap3xxx_mcbsp3_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_mcbsp4_addrs[] = {
- {
- .name = "mpu",
- .pa_start = 0x49026000,
- .pa_end = 0x490260ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_per -> mcbsp4 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp4 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_mcbsp4_hwmod,
.clk = "mcbsp4_ick",
- .addr = omap3xxx_mcbsp4_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_mcbsp5_addrs[] = {
- {
- .name = "mpu",
- .pa_start = 0x48096000,
- .pa_end = 0x480960ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_core -> mcbsp5 */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp5 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_mcbsp5_hwmod,
.clk = "mcbsp5_ick",
- .addr = omap3xxx_mcbsp5_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_mcbsp2_sidetone_addrs[] = {
- {
- .name = "sidetone",
- .pa_start = 0x49028000,
- .pa_end = 0x490280ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_per -> mcbsp2_sidetone */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2_sidetone = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_mcbsp2_sidetone_hwmod,
.clk = "mcbsp2_ick",
- .addr = omap3xxx_mcbsp2_sidetone_addrs,
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_addr_space omap3xxx_mcbsp3_sidetone_addrs[] = {
- {
- .name = "sidetone",
- .pa_start = 0x4902A000,
- .pa_end = 0x4902A0ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
/* l4_per -> mcbsp3_sidetone */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_mcbsp3_sidetone_hwmod,
.clk = "mcbsp3_ick",
- .addr = omap3xxx_mcbsp3_sidetone_addrs,
.user = OCP_USER_MPU,
};
@@ -3223,7 +2601,6 @@ static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_mcspi1,
.clk = "mcspi1_ick",
- .addr = omap2_mcspi1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -3232,7 +2609,6 @@ static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_mcspi2,
.clk = "mcspi2_ick",
- .addr = omap2_mcspi2_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -3241,25 +2617,15 @@ static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi3 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_mcspi3,
.clk = "mcspi3_ick",
- .addr = omap2430_mcspi3_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4 core -> mcspi4 interface */
-static struct omap_hwmod_addr_space omap34xx_mcspi4_addr_space[] = {
- {
- .pa_start = 0x480ba000,
- .pa_end = 0x480ba0ff,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi4 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_mcspi4,
.clk = "mcspi4_ick",
- .addr = omap34xx_mcspi4_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -3270,49 +2636,19 @@ static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = {
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = {
- {
- .name = "uhh",
- .pa_start = 0x48064000,
- .pa_end = 0x480643ff,
- .flags = ADDR_TYPE_RT
- },
- {
- .name = "ohci",
- .pa_start = 0x48064400,
- .pa_end = 0x480647ff,
- },
- {
- .name = "ehci",
- .pa_start = 0x48064800,
- .pa_end = 0x48064cff,
- },
- {}
-};
static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_usb_host_hs_hwmod,
.clk = "usbhost_ick",
- .addr = omap3xxx_usb_host_hs_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_usb_tll_hs_addrs[] = {
- {
- .name = "tll",
- .pa_start = 0x48062000,
- .pa_end = 0x48062fff,
- .flags = ADDR_TYPE_RT
- },
- {}
-};
static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_usb_tll_hs_hwmod,
.clk = "usbtll_ick",
- .addr = omap3xxx_usb_tll_hs_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -3321,35 +2657,17 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__hdq1w = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_hdq1w_hwmod,
.clk = "hdq_ick",
- .addr = omap2_hdq1w_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
.flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
};
/* l4_wkup -> 32ksync_counter */
-static struct omap_hwmod_addr_space omap3xxx_counter_32k_addrs[] = {
- {
- .pa_start = 0x48320000,
- .pa_end = 0x4832001f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-static struct omap_hwmod_addr_space omap3xxx_gpmc_addrs[] = {
- {
- .pa_start = 0x6e000000,
- .pa_end = 0x6e000fff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = {
.master = &omap3xxx_l4_wkup_hwmod,
.slave = &omap3xxx_counter_32k_hwmod,
.clk = "omap_32ksync_ick",
- .addr = omap3xxx_counter_32k_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -3434,7 +2752,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l3_main__gpmc = {
.master = &omap3xxx_l3_main_hwmod,
.slave = &omap3xxx_gpmc_hwmod,
.clk = "core_l3_ick",
- .addr = omap3xxx_gpmc_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -3459,20 +2776,10 @@ static struct omap_hwmod_class omap3xxx_sham_class = {
.sysc = &omap3_sham_sysc,
};
-static struct omap_hwmod_irq_info omap3_sham_mpu_irqs[] = {
- { .irq = 49 + OMAP_INTC_START, },
- { .irq = -1 }
-};
-static struct omap_hwmod_dma_info omap3_sham_sdma_reqs[] = {
- { .name = "rx", .dma_req = 69, },
- { .dma_req = -1 }
-};
static struct omap_hwmod omap3xxx_sham_hwmod = {
.name = "sham",
- .mpu_irqs = omap3_sham_mpu_irqs,
- .sdma_reqs = omap3_sham_sdma_reqs,
.main_clk = "sha12_ick",
.prcm = {
.omap2 = {
@@ -3486,20 +2793,11 @@ static struct omap_hwmod omap3xxx_sham_hwmod = {
.class = &omap3xxx_sham_class,
};
-static struct omap_hwmod_addr_space omap3xxx_sham_addrs[] = {
- {
- .pa_start = 0x480c3000,
- .pa_end = 0x480c3000 + 0x64 - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
static struct omap_hwmod_ocp_if omap3xxx_l4_core__sham = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_sham_hwmod,
.clk = "sha12_ick",
- .addr = omap3xxx_sham_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -3525,15 +2823,9 @@ static struct omap_hwmod_class omap3xxx_aes_class = {
.sysc = &omap3_aes_sysc,
};
-static struct omap_hwmod_dma_info omap3_aes_sdma_reqs[] = {
- { .name = "tx", .dma_req = 65, },
- { .name = "rx", .dma_req = 66, },
- { .dma_req = -1 }
-};
static struct omap_hwmod omap3xxx_aes_hwmod = {
.name = "aes",
- .sdma_reqs = omap3_aes_sdma_reqs,
.main_clk = "aes2_ick",
.prcm = {
.omap2 = {
@@ -3547,20 +2839,11 @@ static struct omap_hwmod omap3xxx_aes_hwmod = {
.class = &omap3xxx_aes_class,
};
-static struct omap_hwmod_addr_space omap3xxx_aes_addrs[] = {
- {
- .pa_start = 0x480c5000,
- .pa_end = 0x480c5000 + 0x50 - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
static struct omap_hwmod_ocp_if omap3xxx_l4_core__aes = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_aes_hwmod,
.clk = "aes2_ick",
- .addr = omap3xxx_aes_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -3661,28 +2944,28 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
/* GP-only hwmod links */
static struct omap_hwmod_ocp_if *omap34xx_gp_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_sec__timer12,
- NULL
+ NULL,
};
static struct omap_hwmod_ocp_if *omap36xx_gp_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_sec__timer12,
- NULL
+ NULL,
};
static struct omap_hwmod_ocp_if *am35xx_gp_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_sec__timer12,
- NULL
+ NULL,
};
/* crypto hwmod links */
static struct omap_hwmod_ocp_if *omap34xx_sham_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__sham,
- NULL
+ NULL,
};
static struct omap_hwmod_ocp_if *omap34xx_aes_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__aes,
- NULL
+ NULL,
};
static struct omap_hwmod_ocp_if *omap36xx_sham_hwmod_ocp_ifs[] __initdata = {
@@ -3710,14 +2993,14 @@ static struct omap_hwmod_ocp_if *am35xx_sham_hwmod_ocp_ifs[] __initdata = {
static struct omap_hwmod_ocp_if *am35xx_aes_hwmod_ocp_ifs[] __initdata = {
/* &omap3xxx_l4_core__aes, */
- NULL
+ NULL,
};
/* 3430ES1-only hwmod links */
static struct omap_hwmod_ocp_if *omap3430es1_hwmod_ocp_ifs[] __initdata = {
&omap3430es1_dss__l3,
&omap3430es1_l4_core__dss,
- NULL
+ NULL,
};
/* 3430ES2+-only hwmod links */
@@ -3729,21 +3012,21 @@ static struct omap_hwmod_ocp_if *omap3430es2plus_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_usb_host_hs__l3_main_2,
&omap3xxx_l4_core__usb_host_hs,
&omap3xxx_l4_core__usb_tll_hs,
- NULL
+ NULL,
};
/* <= 3430ES3-only hwmod links */
static struct omap_hwmod_ocp_if *omap3430_pre_es3_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__pre_es3_mmc1,
&omap3xxx_l4_core__pre_es3_mmc2,
- NULL
+ NULL,
};
/* 3430ES3+-only hwmod links */
static struct omap_hwmod_ocp_if *omap3430_es3plus_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__es3plus_mmc1,
&omap3xxx_l4_core__es3plus_mmc2,
- NULL
+ NULL,
};
/* 34xx-only hwmod links (all ES revisions) */
@@ -3757,7 +3040,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__mmu_isp,
&omap3xxx_l3_main__mmu_iva,
&omap3xxx_l4_core__ssi,
- NULL
+ NULL,
};
/* 36xx-only hwmod links (all ES revisions) */
@@ -3781,7 +3064,7 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__mmu_isp,
&omap3xxx_l3_main__mmu_iva,
&omap3xxx_l4_core__ssi,
- NULL
+ NULL,
};
static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = {
@@ -3800,7 +3083,7 @@ static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = {
&am35xx_l4_core__mdio,
&am35xx_emac__l3,
&am35xx_l4_core__emac,
- NULL
+ NULL,
};
static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = {
@@ -3808,7 +3091,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__dss_dsi1,
&omap3xxx_l4_core__dss_rfbi,
&omap3xxx_l4_core__dss_venc,
- NULL
+ NULL,
};
/**
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -19,22 +19,7 @@
#include "display.h"
/* Common address space across OMAP2xxx/3xxx */
-extern struct omap_hwmod_addr_space omap2_i2c1_addr_space[];
-extern struct omap_hwmod_addr_space omap2_i2c2_addr_space[];
-extern struct omap_hwmod_addr_space omap2_dss_addrs[];
-extern struct omap_hwmod_addr_space omap2_dss_dispc_addrs[];
-extern struct omap_hwmod_addr_space omap2_dss_rfbi_addrs[];
-extern struct omap_hwmod_addr_space omap2_dss_venc_addrs[];
-extern struct omap_hwmod_addr_space omap2_timer10_addrs[];
-extern struct omap_hwmod_addr_space omap2_timer11_addrs[];
-extern struct omap_hwmod_addr_space omap2430_mmc1_addr_space[];
-extern struct omap_hwmod_addr_space omap2430_mmc2_addr_space[];
-extern struct omap_hwmod_addr_space omap2_mcspi1_addr_space[];
-extern struct omap_hwmod_addr_space omap2_mcspi2_addr_space[];
-extern struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[];
extern struct omap_hwmod_addr_space omap2_dma_system_addrs[];
-extern struct omap_hwmod_addr_space omap2_mcbsp1_addrs[];
-extern struct omap_hwmod_addr_space omap2_hdq1w_addr_space[];
/* Common IP block data across OMAP2xxx */
extern struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr;
--
2.10.2
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 11/14] ARM: OMAP2+: Remove legacy smsc911x and smc91x GPMC support
2016-11-11 19:16 [PATCH 00/14] Drop some unused omap platform_data Tony Lindgren
` (8 preceding siblings ...)
2016-11-11 19:17 ` [PATCH 10/14] ARM: OMAP2+: Remove legacy data from hwmod for omap3 Tony Lindgren
@ 2016-11-11 19:17 ` Tony Lindgren
2016-11-11 19:17 ` [PATCH 12/14] ARM: OMAP2+: Remove legacy board-flash.c Tony Lindgren
` (2 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2016-11-11 19:17 UTC (permalink / raw)
To: linux-arm-kernel
From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
When connecting an ethernet chip to the GPMC, such as smc91x
or smsc911x, a GPIO has to be requested to be used as an IRQ
and also the IO memory for a GPMC chip-select.
When booting with DT the chip-select allocation is handled
in a generic manner in the GPMC driver and the GPIO to IRQ
mapping is made by the DT core so this code is not needed
anymore now that mach-omap2 related boards are DT-only.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Makefile | 2 -
arch/arm/mach-omap2/gpmc-smsc911x.c | 100 ------------------------------------
arch/arm/mach-omap2/gpmc-smsc911x.h | 35 -------------
3 files changed, 137 deletions(-)
delete mode 100644 arch/arm/mach-omap2/gpmc-smsc911x.c
delete mode 100644 arch/arm/mach-omap2/gpmc-smsc911x.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -249,7 +249,5 @@ obj-y += $(onenand-m) $(onenand-y)
nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
obj-y += $(nand-m) $(nand-y)
-smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
-obj-y += $(smsc911x-m) $(smsc911x-y)
obj-y += common-board-devices.o dss-common.o
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
deleted file mode 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/gpmc-smsc911x.c
- *
- * Copyright (C) 2009 Li-Pro.Net
- * Stephan Linz <linz@li-pro.net>
- *
- * Modified from linux/arch/arm/mach-omap2/gpmc-smc91x.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-
-#include "gpmc.h"
-#include "gpmc-smsc911x.h"
-
-static struct resource gpmc_smsc911x_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct smsc911x_platform_config gpmc_smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-};
-
-/*
- * Initialize smsc911x device connected to the GPMC. Note that we
- * assume that pin multiplexing is done in the board-*.c file,
- * or in the bootloader.
- */
-void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg)
-{
- struct platform_device *pdev;
- unsigned long cs_mem_base;
- int ret;
-
- if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
- pr_err("Failed to request GPMC mem region\n");
- return;
- }
-
- gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0;
- gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff;
-
- if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "smsc911x irq")) {
- pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq);
- goto free1;
- }
-
- gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
-
- if (gpio_is_valid(gpmc_cfg->gpio_reset)) {
- ret = gpio_request_one(gpmc_cfg->gpio_reset,
- GPIOF_OUT_INIT_HIGH, "smsc911x reset");
- if (ret) {
- pr_err("Failed to request reset GPIO%d\n",
- gpmc_cfg->gpio_reset);
- goto free2;
- }
-
- gpio_set_value(gpmc_cfg->gpio_reset, 0);
- msleep(100);
- gpio_set_value(gpmc_cfg->gpio_reset, 1);
- }
-
- gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT;
-
- pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id,
- gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources),
- &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config));
- if (IS_ERR(pdev)) {
- pr_err("Unable to register platform device\n");
- gpio_free(gpmc_cfg->gpio_reset);
- goto free2;
- }
-
- return;
-
-free2:
- gpio_free(gpmc_cfg->gpio_irq);
-free1:
- gpmc_cs_free(gpmc_cfg->cs);
-
- pr_err("Could not initialize smsc911x device\n");
-}
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.h b/arch/arm/mach-omap2/gpmc-smsc911x.h
deleted file mode 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
- *
- * Copyright (C) 2009 Li-Pro.Net
- * Stephan Linz <linz@li-pro.net>
- *
- * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__
-
-struct omap_smsc911x_platform_data {
- int id;
- int cs;
- int gpio_irq;
- int gpio_reset;
- u32 flags;
-};
-
-#if IS_ENABLED(CONFIG_SMSC911X)
-
-extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
-
-#else
-
-static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d)
-{
-}
-
-#endif
-#endif
--
2.10.2
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 12/14] ARM: OMAP2+: Remove legacy board-flash.c
2016-11-11 19:16 [PATCH 00/14] Drop some unused omap platform_data Tony Lindgren
` (9 preceding siblings ...)
2016-11-11 19:17 ` [PATCH 11/14] ARM: OMAP2+: Remove legacy smsc911x and smc91x GPMC support Tony Lindgren
@ 2016-11-11 19:17 ` Tony Lindgren
2016-11-11 19:17 ` [PATCH 13/14] ARM: OMAP2+: Drop legacy ads7846 init Tony Lindgren
2016-11-11 19:17 ` [PATCH 14/14] ARM: OMAP2+: Drop legacy sdram timings Tony Lindgren
12 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2016-11-11 19:17 UTC (permalink / raw)
To: linux-arm-kernel
From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Legacy board files in mach-omap2 used the helper functions
board_{nor,nand,onenand}_init() to initialize the flash
devices attached to the GPMC.
With Device Tree booting the initialization is handled by
the GPMC driver gpmc_probe_*_child() functions so this
code is not needed anymore now that OMAP2+ is DT-only.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Makefile | 4 -
arch/arm/mach-omap2/board-flash.c | 242 --------------------------------------
arch/arm/mach-omap2/board-flash.h | 56 ---------
3 files changed, 302 deletions(-)
delete mode 100644 arch/arm/mach-omap2/board-flash.c
delete mode 100644 arch/arm/mach-omap2/board-flash.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -232,10 +232,6 @@ obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
# Platform specific device init code
-omap-flash-$(CONFIG_MTD_NAND_OMAP2) := board-flash.o
-omap-flash-$(CONFIG_MTD_ONENAND_OMAP2) := board-flash.o
-obj-y += $(omap-flash-y) $(omap-flash-m)
-
omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o
obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y)
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
deleted file mode 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * board-flash.c
- * Modified from mach-omap2/board-3430sdp-flash.c
- *
- * Copyright (C) 2009 Nokia Corporation
- * Copyright (C) 2009 Texas Instruments
- *
- * Vimal Singh <vimalsingh@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/omap-gpmc.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
-
-#include "soc.h"
-#include "common.h"
-#include "board-flash.h"
-
-#define REG_FPGA_REV 0x10
-#define REG_FPGA_DIP_SWITCH_INPUT2 0x60
-#define MAX_SUPPORTED_GPMC_CONFIG 3
-
-#define DEBUG_BASE 0x08000000 /* debug board */
-
-/* various memory sizes */
-#define FLASH_SIZE_SDPV1 SZ_64M /* NOR flash (64 Meg aligned) */
-#define FLASH_SIZE_SDPV2 SZ_128M /* NOR flash (256 Meg aligned) */
-
-static struct physmap_flash_data board_nor_data = {
- .width = 2,
-};
-
-static struct resource board_nor_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device board_nor_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &board_nor_data,
- },
- .num_resources = 1,
- .resource = &board_nor_resource,
-};
-
-static void
-__init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
-{
- int err;
-
- board_nor_data.parts = nor_parts;
- board_nor_data.nr_parts = nr_parts;
-
- /* Configure start address and size of NOR device */
- if (omap_rev() >= OMAP3430_REV_ES1_0) {
- err = gpmc_cs_request(cs, FLASH_SIZE_SDPV2 - 1,
- (unsigned long *)&board_nor_resource.start);
- board_nor_resource.end = board_nor_resource.start
- + FLASH_SIZE_SDPV2 - 1;
- } else {
- err = gpmc_cs_request(cs, FLASH_SIZE_SDPV1 - 1,
- (unsigned long *)&board_nor_resource.start);
- board_nor_resource.end = board_nor_resource.start
- + FLASH_SIZE_SDPV1 - 1;
- }
- if (err < 0) {
- pr_err("NOR: Can't request GPMC CS\n");
- return;
- }
- if (platform_device_register(&board_nor_device) < 0)
- pr_err("Unable to register NOR device\n");
-}
-
-#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
-static struct omap_onenand_platform_data board_onenand_data = {
- .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */
-};
-
-void
-__init board_onenand_init(struct mtd_partition *onenand_parts,
- u8 nr_parts, u8 cs)
-{
- board_onenand_data.cs = cs;
- board_onenand_data.parts = onenand_parts;
- board_onenand_data.nr_parts = nr_parts;
-
- gpmc_onenand_init(&board_onenand_data);
-}
-#endif /* IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) */
-
-#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
-
-/* Note that all values in this struct are in nanoseconds */
-struct gpmc_timings nand_default_timings[1] = {
- {
- .sync_clk = 0,
-
- .cs_on = 0,
- .cs_rd_off = 36,
- .cs_wr_off = 36,
-
- .we_on = 6,
- .oe_on = 6,
-
- .adv_on = 6,
- .adv_rd_off = 24,
- .adv_wr_off = 36,
-
- .we_off = 30,
- .oe_off = 48,
-
- .access = 54,
- .rd_cycle = 72,
- .wr_cycle = 72,
-
- .wr_access = 30,
- .wr_data_mux_bus = 0,
- },
-};
-
-static struct omap_nand_platform_data board_nand_data;
-
-void
-__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
- int nand_type, struct gpmc_timings *gpmc_t)
-{
- board_nand_data.cs = cs;
- board_nand_data.parts = nand_parts;
- board_nand_data.nr_parts = nr_parts;
- board_nand_data.devsize = nand_type;
-
- board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW;
- gpmc_nand_init(&board_nand_data, gpmc_t);
-}
-#endif /* IS_ENABLED(CONFIG_MTD_NAND_OMAP2) */
-
-/**
- * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
- * the various cs values.
- */
-static u8 get_gpmc0_type(void)
-{
- u8 cs = 0;
- void __iomem *fpga_map_addr;
-
- fpga_map_addr = ioremap(DEBUG_BASE, 4096);
- if (!fpga_map_addr)
- return -ENOMEM;
-
- if (!(readw_relaxed(fpga_map_addr + REG_FPGA_REV)))
- /* we dont have an DEBUG FPGA??? */
- /* Depend on #defines!! default to strata boot return param */
- goto unmap;
-
- /* S8-DIP-OFF = 1, S8-DIP-ON = 0 */
- cs = readw_relaxed(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf;
-
- /* ES2.0 SDP's onwards 4 dip switches are provided for CS */
- if (omap_rev() >= OMAP3430_REV_ES1_0)
- /* change (S8-1:4=DS-2:0) to (S8-4:1=DS-2:0) */
- cs = ((cs & 8) >> 3) | ((cs & 4) >> 1) |
- ((cs & 2) << 1) | ((cs & 1) << 3);
- else
- /* change (S8-1:3=DS-2:0) to (S8-3:1=DS-2:0) */
- cs = ((cs & 4) >> 2) | (cs & 2) | ((cs & 1) << 2);
-unmap:
- iounmap(fpga_map_addr);
- return cs;
-}
-
-/**
- * board_flash_init - Identify devices connected to GPMC and register.
- *
- * @return - void.
- */
-void __init board_flash_init(struct flash_partitions partition_info[],
- char chip_sel_board[][GPMC_CS_NUM], int nand_type)
-{
- u8 cs = 0;
- u8 norcs = GPMC_CS_NUM + 1;
- u8 nandcs = GPMC_CS_NUM + 1;
- u8 onenandcs = GPMC_CS_NUM + 1;
- u8 idx;
- unsigned char *config_sel = NULL;
-
- /* REVISIT: Is this return correct idx for 2430 SDP?
- * for which cs configuration matches for 2430 SDP?
- */
- idx = get_gpmc0_type();
- if (idx >= MAX_SUPPORTED_GPMC_CONFIG) {
- pr_err("%s: Invalid chip select: %d\n", __func__, cs);
- return;
- }
- config_sel = (unsigned char *)(chip_sel_board[idx]);
-
- while (cs < GPMC_CS_NUM) {
- switch (config_sel[cs]) {
- case PDC_NOR:
- if (norcs > GPMC_CS_NUM)
- norcs = cs;
- break;
- case PDC_NAND:
- if (nandcs > GPMC_CS_NUM)
- nandcs = cs;
- break;
- case PDC_ONENAND:
- if (onenandcs > GPMC_CS_NUM)
- onenandcs = cs;
- break;
- }
- cs++;
- }
-
- if (norcs > GPMC_CS_NUM)
- pr_err("NOR: Unable to find configuration in GPMC\n");
- else
- board_nor_init(partition_info[0].parts,
- partition_info[0].nr_parts, norcs);
-
- if (onenandcs > GPMC_CS_NUM)
- pr_err("OneNAND: Unable to find configuration in GPMC\n");
- else
- board_onenand_init(partition_info[1].parts,
- partition_info[1].nr_parts, onenandcs);
-
- if (nandcs > GPMC_CS_NUM)
- pr_err("NAND: Unable to find configuration in GPMC\n");
- else
- board_nand_init(partition_info[2].parts,
- partition_info[2].nr_parts, nandcs,
- nand_type, nand_default_timings);
-}
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
deleted file mode 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * board-sdp.h
- *
- * Information structures for SDP-specific board config data
- *
- * Copyright (C) 2009 Nokia Corporation
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#define PDC_NOR 1
-#define PDC_NAND 2
-#define PDC_ONENAND 3
-#define DBG_MPDB 4
-
-struct flash_partitions {
- struct mtd_partition *parts;
- int nr_parts;
-};
-
-#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) || IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
-extern void board_flash_init(struct flash_partitions [],
- char chip_sel[][GPMC_CS_NUM], int nand_type);
-#else
-static inline void board_flash_init(struct flash_partitions part[],
- char chip_sel[][GPMC_CS_NUM], int nand_type)
-{
-}
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
-extern void board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
-extern struct gpmc_timings nand_default_timings[];
-#else
-static inline void board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t)
-{
-}
-#define nand_default_timings NULL
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
-extern void board_onenand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs);
-#else
-static inline void board_onenand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs)
-{
-}
-#endif
--
2.10.2
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 13/14] ARM: OMAP2+: Drop legacy ads7846 init
2016-11-11 19:16 [PATCH 00/14] Drop some unused omap platform_data Tony Lindgren
` (10 preceding siblings ...)
2016-11-11 19:17 ` [PATCH 12/14] ARM: OMAP2+: Remove legacy board-flash.c Tony Lindgren
@ 2016-11-11 19:17 ` Tony Lindgren
2016-11-11 19:17 ` [PATCH 14/14] ARM: OMAP2+: Drop legacy sdram timings Tony Lindgren
12 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2016-11-11 19:17 UTC (permalink / raw)
To: linux-arm-kernel
---
arch/arm/mach-omap2/Makefile | 3 -
arch/arm/mach-omap2/common-board-devices.c | 102 -----------------------------
arch/arm/mach-omap2/common-board-devices.h | 7 --
arch/arm/mach-omap2/dss-common.c | 36 ----------
arch/arm/mach-omap2/dss-common.h | 13 ----
arch/arm/mach-omap2/pdata-quirks.c | 1 -
6 files changed, 162 deletions(-)
delete mode 100644 arch/arm/mach-omap2/common-board-devices.c
delete mode 100644 arch/arm/mach-omap2/dss-common.c
delete mode 100644 arch/arm/mach-omap2/dss-common.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -244,6 +244,3 @@ obj-y += $(onenand-m) $(onenand-y)
nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
obj-y += $(nand-m) $(nand-y)
-
-
-obj-y += common-board-devices.o dss-common.o
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
deleted file mode 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * common-board-devices.c
- *
- * Copyright (C) 2011 CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include "common.h"
-#include "common-board-devices.h"
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846)
-static struct omap2_mcspi_device_config ads7846_mcspi_config = {
- .turbo_mode = 0,
-};
-
-static struct ads7846_platform_data ads7846_config = {
- .x_max = 0x0fff,
- .y_max = 0x0fff,
- .x_plate_ohms = 180,
- .pressure_max = 255,
- .debounce_max = 10,
- .debounce_tol = 3,
- .debounce_rep = 1,
- .gpio_pendown = -EINVAL,
- .keep_vref_on = 1,
-};
-
-static struct spi_board_info ads7846_spi_board_info __initdata = {
- .modalias = "ads7846",
- .bus_num = -EINVAL,
- .chip_select = 0,
- .max_speed_hz = 1500000,
- .controller_data = &ads7846_mcspi_config,
- .irq = -EINVAL,
- .platform_data = &ads7846_config,
-};
-
-void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
- struct ads7846_platform_data *board_pdata)
-{
- struct spi_board_info *spi_bi = &ads7846_spi_board_info;
- int err;
-
- /*
- * If a board defines get_pendown_state() function, request the pendown
- * GPIO and set the GPIO debounce time.
- * If a board does not define the get_pendown_state() function, then
- * the ads7846 driver will setup the pendown GPIO itself.
- */
- if (board_pdata && board_pdata->get_pendown_state) {
- err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
- if (err) {
- pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
- return;
- }
-
- if (gpio_debounce)
- gpio_set_debounce(gpio_pendown, gpio_debounce);
-
- gpio_export(gpio_pendown, 0);
- }
-
- spi_bi->bus_num = bus_num;
- spi_bi->irq = gpio_to_irq(gpio_pendown);
-
- ads7846_config.gpio_pendown = gpio_pendown;
-
- if (board_pdata) {
- board_pdata->gpio_pendown = gpio_pendown;
- board_pdata->gpio_pendown_debounce = gpio_debounce;
- spi_bi->platform_data = board_pdata;
- }
-
- spi_register_board_info(&ads7846_spi_board_info, 1);
-}
-#else
-void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
- struct ads7846_platform_data *board_pdata)
-{
-}
-#endif
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -4,13 +4,6 @@
#include <sound/tlv320aic3x.h>
#include <linux/mfd/menelaus.h>
-#define NAND_BLOCK_SIZE SZ_128K
-
-struct mtd_partition;
-struct ads7846_platform_data;
-
-void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
- struct ads7846_platform_data *board_pdata);
void *n8x0_legacy_init(void);
extern struct menelaus_platform_data n8x0_menelaus_platform_data;
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
deleted file mode 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments, Inc..
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-/*
- * NOTE: this is a transitional file to help with DT adaptation.
- * This file will be removed when DSS supports DT.
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <linux/platform_data/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "soc.h"
-#include "dss-common.h"
-#include "display.h"
-
diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h
deleted file mode 100644
--- a/arch/arm/mach-omap2/dss-common.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __OMAP_DSS_COMMON__
-#define __OMAP_DSS_COMMON__
-
-/*
- * NOTE: this is a transitional file to help with DT adaptation.
- * This file will be removed when DSS supports DT.
- */
-
-void __init omap4_panda_display_init_of(void);
-void __init omap_4430sdp_display_init_of(void);
-void __init omap3_igep2_display_init_of(void);
-
-#endif
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -31,7 +31,6 @@
#include "common.h"
#include "common-board-devices.h"
-#include "dss-common.h"
#include "control.h"
#include "omap_device.h"
#include "omap-pm.h"
--
2.10.2
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 14/14] ARM: OMAP2+: Drop legacy sdram timings
2016-11-11 19:16 [PATCH 00/14] Drop some unused omap platform_data Tony Lindgren
` (11 preceding siblings ...)
2016-11-11 19:17 ` [PATCH 13/14] ARM: OMAP2+: Drop legacy ads7846 init Tony Lindgren
@ 2016-11-11 19:17 ` Tony Lindgren
12 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2016-11-11 19:17 UTC (permalink / raw)
To: linux-arm-kernel
These are no longer used. If somebody needs to configure
memory timings for various idle modes, they should be
implemented as a device driver callbacks from the PM
code.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h | 51 ----
arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h | 55 ----
arch/arm/mach-omap2/sdram-nokia.c | 299 ---------------------
arch/arm/mach-omap2/sdram-nokia.h | 12 -
arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h | 51 ----
.../mach-omap2/sdram-qimonda-hyb18m512160af-6.h | 54 ----
6 files changed, 522 deletions(-)
delete mode 100644 arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
delete mode 100644 arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
delete mode 100644 arch/arm/mach-omap2/sdram-nokia.c
delete mode 100644 arch/arm/mach-omap2/sdram-nokia.h
delete mode 100644 arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
delete mode 100644 arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
diff --git a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
deleted file mode 100644
--- a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * SDRC register values for the Hynix H8MBX00U0MER-0EM
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
-#define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
-
-#include "sdrc.h"
-
-/* Hynix H8MBX00U0MER-0EM */
-static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = {
- [0] = {
- .rate = 200000000,
- .actim_ctrla = 0xa2e1b4c6,
- .actim_ctrlb = 0x0002131c,
- .rfr_ctrl = 0x0005e601,
- .mr = 0x00000032,
- },
- [1] = {
- .rate = 166000000,
- .actim_ctrla = 0x629db4c6,
- .actim_ctrlb = 0x00012214,
- .rfr_ctrl = 0x0004dc01,
- .mr = 0x00000032,
- },
- [2] = {
- .rate = 100000000,
- .actim_ctrla = 0x51912284,
- .actim_ctrlb = 0x0002120e,
- .rfr_ctrl = 0x0002d101,
- .mr = 0x00000022,
- },
- [3] = {
- .rate = 83000000,
- .actim_ctrla = 0x31512283,
- .actim_ctrlb = 0x0001220a,
- .rfr_ctrl = 0x00025501,
- .mr = 0x00000022,
- },
- [4] = {
- .rate = 0
- },
-};
-
-#endif
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
deleted file mode 100644
--- a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * SDRC register values for the Micron MT46H32M32LF-6
- *
- * Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
-#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
-
-#include "sdrc.h"
-
-/* Micron MT46H32M32LF-6 */
-/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
-static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = {
- [0] = {
- .rate = 166000000,
- .actim_ctrla = 0x9a9db4c6,
- .actim_ctrlb = 0x00011217,
- .rfr_ctrl = 0x0004dc01,
- .mr = 0x00000032,
- },
- [1] = {
- .rate = 165941176,
- .actim_ctrla = 0x9a9db4c6,
- .actim_ctrlb = 0x00011217,
- .rfr_ctrl = 0x0004dc01,
- .mr = 0x00000032,
- },
- [2] = {
- .rate = 83000000,
- .actim_ctrla = 0x51512283,
- .actim_ctrlb = 0x0001120c,
- .rfr_ctrl = 0x00025501,
- .mr = 0x00000032,
- },
- [3] = {
- .rate = 82970588,
- .actim_ctrla = 0x51512283,
- .actim_ctrlb = 0x0001120c,
- .rfr_ctrl = 0x00025501,
- .mr = 0x00000032,
- },
- [4] = {
- .rate = 0
- },
-};
-
-#endif
diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c
deleted file mode 100644
--- a/arch/arm/mach-omap2/sdram-nokia.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * SDRC register values for Nokia boards
- *
- * Copyright (C) 2008, 2010-2011 Nokia Corporation
- *
- * Lauri Leukkunen <lauri.leukkunen@nokia.com>
- *
- * Original code by Juha Yrjola <juha.yrjola@solidboot.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include "common.h"
-#include "sdram-nokia.h"
-#include "sdrc.h"
-
-/* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */
-struct sdram_timings {
- u32 casl;
- u32 tDAL;
- u32 tDPL;
- u32 tRRD;
- u32 tRCD;
- u32 tRP;
- u32 tRAS;
- u32 tRC;
- u32 tRFC;
- u32 tXSR;
-
- u32 tREF; /* in ns */
-
- u32 tXP;
- u32 tCKE;
- u32 tWTR;
-};
-
-static const struct sdram_timings nokia_97dot6mhz_timings[] = {
- {
- .casl = 3,
- .tDAL = 30725,
- .tDPL = 15362,
- .tRRD = 10241,
- .tRCD = 20483,
- .tRP = 15362,
- .tRAS = 40967,
- .tRC = 56330,
- .tRFC = 138266,
- .tXSR = 204839,
-
- .tREF = 7798,
-
- .tXP = 2,
- .tCKE = 4,
- .tWTR = 2,
- },
-};
-
-static const struct sdram_timings nokia_166mhz_timings[] = {
- {
- .casl = 3,
- .tDAL = 33000,
- .tDPL = 15000,
- .tRRD = 12000,
- .tRCD = 22500,
- .tRP = 18000,
- .tRAS = 42000,
- .tRC = 66000,
- .tRFC = 138000,
- .tXSR = 200000,
-
- .tREF = 7800,
-
- .tXP = 2,
- .tCKE = 2,
- .tWTR = 2
- },
-};
-
-static const struct sdram_timings nokia_195dot2mhz_timings[] = {
- {
- .casl = 3,
- .tDAL = 30725,
- .tDPL = 15362,
- .tRRD = 10241,
- .tRCD = 20483,
- .tRP = 15362,
- .tRAS = 40967,
- .tRC = 56330,
- .tRFC = 138266,
- .tXSR = 204839,
-
- .tREF = 7752,
-
- .tXP = 2,
- .tCKE = 4,
- .tWTR = 2,
- },
-};
-
-static const struct sdram_timings nokia_200mhz_timings[] = {
- {
- .casl = 3,
- .tDAL = 30000,
- .tDPL = 15000,
- .tRRD = 10000,
- .tRCD = 20000,
- .tRP = 15000,
- .tRAS = 40000,
- .tRC = 55000,
- .tRFC = 140000,
- .tXSR = 200000,
-
- .tREF = 7800,
-
- .tXP = 2,
- .tCKE = 4,
- .tWTR = 2
- },
-};
-
-static const struct {
- long rate;
- struct sdram_timings const *data;
-} nokia_timings[] = {
- { 83000000, nokia_166mhz_timings },
- { 97600000, nokia_97dot6mhz_timings },
- { 100000000, nokia_200mhz_timings },
- { 166000000, nokia_166mhz_timings },
- { 195200000, nokia_195dot2mhz_timings },
- { 200000000, nokia_200mhz_timings },
-};
-static struct omap_sdrc_params nokia_sdrc_params[ARRAY_SIZE(nokia_timings) + 1];
-
-static unsigned long sdrc_get_fclk_period(long rate)
-{
- /* In picoseconds */
- return 1000000000 / rate;
-}
-
-static unsigned int sdrc_ps_to_ticks(unsigned int time_ps, long rate)
-{
- unsigned long tick_ps;
-
- /* Calculate in picosecs to yield more exact results */
- tick_ps = sdrc_get_fclk_period(rate);
-
- return (time_ps + tick_ps - 1) / tick_ps;
-}
-#undef DEBUG
-#ifdef DEBUG
-static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit,
- int ticks, long rate, const char *name)
-#else
-static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit,
- int ticks)
-#endif
-{
- int mask, nr_bits;
-
- nr_bits = end_bit - st_bit + 1;
- if (ticks >= 1 << nr_bits)
- return -1;
- mask = (1 << nr_bits) - 1;
- *regval &= ~(mask << st_bit);
- *regval |= ticks << st_bit;
-#ifdef DEBUG
- printk(KERN_INFO "SDRC %s: %i ticks %i ns\n", name, ticks,
- (unsigned int)sdrc_get_fclk_period(rate) * ticks /
- 1000);
-#endif
-
- return 0;
-}
-
-#ifdef DEBUG
-#define SDRC_SET_ONE(reg, st, end, field, rate) \
- if (set_sdrc_timing_regval((reg), (st), (end), \
- memory_timings->field, (rate), #field) < 0) \
- err = -1;
-#else
-#define SDRC_SET_ONE(reg, st, end, field, rate) \
- if (set_sdrc_timing_regval((reg), (st), (end), \
- memory_timings->field) < 0) \
- err = -1;
-#endif
-
-#ifdef DEBUG
-static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit,
- int time, long rate, const char *name)
-#else
-static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit,
- int time, long rate)
-#endif
-{
- int ticks, ret;
- ret = 0;
-
- if (time == 0)
- ticks = 0;
- else
- ticks = sdrc_ps_to_ticks(time, rate);
-
-#ifdef DEBUG
- ret = set_sdrc_timing_regval(regval, st_bit, end_bit, ticks,
- rate, name);
-#else
- ret = set_sdrc_timing_regval(regval, st_bit, end_bit, ticks);
-#endif
-
- return ret;
-}
-
-#ifdef DEBUG
-#define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
- if (set_sdrc_timing_regval_ps((reg), (st), (end), \
- memory_timings->field, \
- (rate), #field) < 0) \
- err = -1;
-
-#else
-#define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
- if (set_sdrc_timing_regval_ps((reg), (st), (end), \
- memory_timings->field, (rate)) < 0) \
- err = -1;
-#endif
-
-static int sdrc_timings(int id, long rate,
- const struct sdram_timings *memory_timings)
-{
- u32 ticks_per_ms;
- u32 rfr, l;
- u32 actim_ctrla = 0, actim_ctrlb = 0;
- u32 rfr_ctrl;
- int err = 0;
- long l3_rate = rate / 1000;
-
- SDRC_SET_ONE_PS(&actim_ctrla, 0, 4, tDAL, l3_rate);
- SDRC_SET_ONE_PS(&actim_ctrla, 6, 8, tDPL, l3_rate);
- SDRC_SET_ONE_PS(&actim_ctrla, 9, 11, tRRD, l3_rate);
- SDRC_SET_ONE_PS(&actim_ctrla, 12, 14, tRCD, l3_rate);
- SDRC_SET_ONE_PS(&actim_ctrla, 15, 17, tRP, l3_rate);
- SDRC_SET_ONE_PS(&actim_ctrla, 18, 21, tRAS, l3_rate);
- SDRC_SET_ONE_PS(&actim_ctrla, 22, 26, tRC, l3_rate);
- SDRC_SET_ONE_PS(&actim_ctrla, 27, 31, tRFC, l3_rate);
-
- SDRC_SET_ONE_PS(&actim_ctrlb, 0, 7, tXSR, l3_rate);
-
- SDRC_SET_ONE(&actim_ctrlb, 8, 10, tXP, l3_rate);
- SDRC_SET_ONE(&actim_ctrlb, 12, 14, tCKE, l3_rate);
- SDRC_SET_ONE(&actim_ctrlb, 16, 17, tWTR, l3_rate);
-
- ticks_per_ms = l3_rate;
- rfr = memory_timings[0].tREF * ticks_per_ms / 1000000;
- if (rfr > 65535 + 50)
- rfr = 65535;
- else
- rfr -= 50;
-
-#ifdef DEBUG
- printk(KERN_INFO "SDRC tREF: %i ticks\n", rfr);
-#endif
-
- l = rfr << 8;
- rfr_ctrl = l | 0x1; /* autorefresh, reload counter with 1xARCV */
-
- nokia_sdrc_params[id].rate = rate;
- nokia_sdrc_params[id].actim_ctrla = actim_ctrla;
- nokia_sdrc_params[id].actim_ctrlb = actim_ctrlb;
- nokia_sdrc_params[id].rfr_ctrl = rfr_ctrl;
- nokia_sdrc_params[id].mr = 0x32;
-
- nokia_sdrc_params[id + 1].rate = 0;
-
- return err;
-}
-
-struct omap_sdrc_params *nokia_get_sdram_timings(void)
-{
- int err = 0;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(nokia_timings); i++) {
- err |= sdrc_timings(i, nokia_timings[i].rate,
- nokia_timings[i].data);
- if (err)
- pr_err("%s: error with rate %ld: %d\n", __func__,
- nokia_timings[i].rate, err);
- }
-
- return err ? NULL : nokia_sdrc_params;
-}
-
diff --git a/arch/arm/mach-omap2/sdram-nokia.h b/arch/arm/mach-omap2/sdram-nokia.h
deleted file mode 100644
--- a/arch/arm/mach-omap2/sdram-nokia.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * SDRC register values for Nokia boards
- *
- * Copyright (C) 2010 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-struct omap_sdrc_params *nokia_get_sdram_timings(void);
-
diff --git a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
deleted file mode 100644
--- a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * SDRC register values for the Numonyx M65KXXXXAM
- *
- * Copyright (C) 2009 Integration Software and Electronic Engineering.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
-#define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
-
-#include "sdrc.h"
-
-/* Numonyx M65KXXXXAM */
-static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = {
- [0] = {
- .rate = 200000000,
- .actim_ctrla = 0xe321d4c6,
- .actim_ctrlb = 0x00022328,
- .rfr_ctrl = 0x0005e601,
- .mr = 0x00000032,
- },
- [1] = {
- .rate = 166000000,
- .actim_ctrla = 0xba9dc485,
- .actim_ctrlb = 0x00022321,
- .rfr_ctrl = 0x0004dc01,
- .mr = 0x00000032,
- },
- [2] = {
- .rate = 133000000,
- .actim_ctrla = 0x9a19b485,
- .actim_ctrlb = 0x0002231b,
- .rfr_ctrl = 0x0003de01,
- .mr = 0x00000032,
- },
- [3] = {
- .rate = 83000000,
- .actim_ctrla = 0x594ca242,
- .actim_ctrlb = 0x00022310,
- .rfr_ctrl = 0x00025501,
- .mr = 0x00000032,
- },
- [4] = {
- .rate = 0
- },
-};
-
-#endif
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
deleted file mode 100644
--- a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * SDRC register values for the Qimonda HYB18M512160AF-6
- *
- * Copyright (C) 2008-2009 Texas Instruments, Inc.
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
-#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
-
-#include "sdrc.h"
-
-/* Qimonda HYB18M512160AF-6 */
-static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
- [0] = {
- .rate = 166000000,
- .actim_ctrla = 0x629db4c6,
- .actim_ctrlb = 0x00012214,
- .rfr_ctrl = 0x0004dc01,
- .mr = 0x00000032,
- },
- [1] = {
- .rate = 165941176,
- .actim_ctrla = 0x629db4c6,
- .actim_ctrlb = 0x00012214,
- .rfr_ctrl = 0x0004dc01,
- .mr = 0x00000032,
- },
- [2] = {
- .rate = 83000000,
- .actim_ctrla = 0x31512283,
- .actim_ctrlb = 0x0001220a,
- .rfr_ctrl = 0x00025501,
- .mr = 0x00000022,
- },
- [3] = {
- .rate = 82970588,
- .actim_ctrla = 0x31512283,
- .actim_ctrlb = 0x0001220a,
- .rfr_ctrl = 0x00025501,
- .mr = 0x00000022,
- },
- [4] = {
- .rate = 0
- },
-};
-
-#endif
--
2.10.2
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 10/14] ARM: OMAP2+: Remove legacy data from hwmod for omap3
2016-11-11 19:17 ` [PATCH 10/14] ARM: OMAP2+: Remove legacy data from hwmod for omap3 Tony Lindgren
@ 2017-02-14 16:59 ` Adam Ford
2017-02-14 17:44 ` Tony Lindgren
0 siblings, 1 reply; 18+ messages in thread
From: Adam Ford @ 2017-02-14 16:59 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Nov 11, 2016 at 1:17 PM, Tony Lindgren <tony@atomide.com> wrote:
> This data is now coming from device tree so we can remove the
> duplicate data. Let's keep the DSS and DMA related things for now
> until those have been converted to device tree completely.
>
> While at it, let's also add the trailing commas to data structures
> so further processing with scripts will be a bit easier.
>
Tony,
I am having some errors with this patch.
Smartreflex on a DM3730 drops a few errors:
[ 1.209747] smartreflex smartreflex.0: invalid resource
[ 1.215301] smartreflex smartreflex.0: omap_sr_probe: ioremap fail
[ 1.221832] smartreflex smartreflex.1: invalid resource
[ 1.227294] smartreflex smartreflex.1: omap_sr_probe: ioremap fail
[ 1.233856] sr_init: platform driver register failed for SR
I used Git bisect to narrow it down to this patch, and I confirmed it
manually. Sorry it took so long to get feedback on this, but I was on
vacation.
I attempted to just add back the smartreflex stuff for the omap36xx,
but that didn't work. I am going to assume something is missing or
wrong in the device tree, but I could be wrong. If you have any
suggestions before I go down a rabbit hole, I am open for ideas.
adam
> Cc: Paul Walmsley <paul@pwsan.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
> .../omap_hwmod_2xxx_3xxx_interconnect_data.c | 149 +---
> .../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 201 +-----
> .../mach-omap2/omap_hwmod_2xxx_interconnect_data.c | 4 -
> arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 1 -
> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 787 +--------------------
> arch/arm/mach-omap2/omap_hwmod_common_data.h | 15 -
> 6 files changed, 43 insertions(+), 1114 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
> --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
> @@ -17,156 +17,11 @@
>
[ Stuff Deleted]
> --
> 2.10.2
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 10/14] ARM: OMAP2+: Remove legacy data from hwmod for omap3
2017-02-14 16:59 ` Adam Ford
@ 2017-02-14 17:44 ` Tony Lindgren
2017-02-14 17:47 ` Tony Lindgren
2017-02-14 17:56 ` Adam Ford
0 siblings, 2 replies; 18+ messages in thread
From: Tony Lindgren @ 2017-02-14 17:44 UTC (permalink / raw)
To: linux-arm-kernel
* Adam Ford <aford173@gmail.com> [170214 09:01]:
> On Fri, Nov 11, 2016 at 1:17 PM, Tony Lindgren <tony@atomide.com> wrote:
> > This data is now coming from device tree so we can remove the
> > duplicate data. Let's keep the DSS and DMA related things for now
> > until those have been converted to device tree completely.
> >
> > While at it, let's also add the trailing commas to data structures
> > so further processing with scripts will be a bit easier.
> >
> Tony,
>
> I am having some errors with this patch.
>
> Smartreflex on a DM3730 drops a few errors:
>
> [ 1.209747] smartreflex smartreflex.0: invalid resource
> [ 1.215301] smartreflex smartreflex.0: omap_sr_probe: ioremap fail
> [ 1.221832] smartreflex smartreflex.1: invalid resource
> [ 1.227294] smartreflex smartreflex.1: omap_sr_probe: ioremap fail
> [ 1.233856] sr_init: platform driver register failed for SR
>
> I used Git bisect to narrow it down to this patch, and I confirmed it
> manually. Sorry it took so long to get feedback on this, but I was on
> vacation.
Oh OK sorry about that.
> I attempted to just add back the smartreflex stuff for the omap36xx,
> but that didn't work. I am going to assume something is missing or
> wrong in the device tree, but I could be wrong. If you have any
> suggestions before I go down a rabbit hole, I am open for ideas.
That's all there is to it :) You must have missed some part of it.
Below is a fix that seems to work for me, care to test?
Regards,
Tony
8< -----------------------
>From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Tue, 14 Feb 2017 09:33:25 -0800
Subject: [PATCH] ARM: OMAP3: Fix smartreflex platform data regression
Commit d9d9cec02835 ("ARM: OMAP2+: Remove legacy data from hwmod for
omap3") dropped platform data that should no longer be used as we're
booting with device tree. It turns out that smartreflex is still
using platform data and produces the following errors during probe:
smartreflex smartreflex.0: invalid resource
smartreflex smartreflex.0: omap_sr_probe: ioremap fail
smartreflex: probe of smartreflex.0 failed with error -22
smartreflex smartreflex.1: invalid resource
smartreflex smartreflex.1: omap_sr_probe: ioremap fail
smartreflex: probe of smartreflex.1 failed with error -22
Let's fix the regression by adding back the smartreflex hwmod data.
The long term is to update the smartreflex driver to use device tree
based probing.
Reported-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1946,6 +1946,7 @@ static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = {
};
/* l3_core -> usbhsotg interface */
+
static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = {
.master = &omap3xxx_usbhsotg_hwmod,
.slave = &omap3xxx_l3_main_hwmod,
@@ -2112,11 +2113,20 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
};
/* L4 CORE -> SR1 interface */
+static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
+ {
+ .pa_start = OMAP34XX_SR1_BASE,
+ .pa_end = OMAP34XX_SR1_BASE + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { },
+};
static struct omap_hwmod_ocp_if omap34xx_l4_core__sr1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_sr1_hwmod,
.clk = "sr_l4_ick",
+ .addr = omap3_sr1_addr_space,
.user = OCP_USER_MPU,
};
@@ -2124,15 +2134,25 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap36xx_sr1_hwmod,
.clk = "sr_l4_ick",
+ .addr = omap3_sr1_addr_space,
.user = OCP_USER_MPU,
};
/* L4 CORE -> SR1 interface */
+static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = {
+ {
+ .pa_start = OMAP34XX_SR2_BASE,
+ .pa_end = OMAP34XX_SR2_BASE + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { },
+};
static struct omap_hwmod_ocp_if omap34xx_l4_core__sr2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_sr2_hwmod,
.clk = "sr_l4_ick",
+ .addr = omap3_sr2_addr_space,
.user = OCP_USER_MPU,
};
@@ -2140,6 +2160,7 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap36xx_sr2_hwmod,
.clk = "sr_l4_ick",
+ .addr = omap3_sr2_addr_space,
.user = OCP_USER_MPU,
};
--
2.11.1
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 10/14] ARM: OMAP2+: Remove legacy data from hwmod for omap3
2017-02-14 17:44 ` Tony Lindgren
@ 2017-02-14 17:47 ` Tony Lindgren
2017-02-14 17:56 ` Adam Ford
1 sibling, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2017-02-14 17:47 UTC (permalink / raw)
To: linux-arm-kernel
* Tony Lindgren <tony@atomide.com> [170214 09:46]:
> * Adam Ford <aford173@gmail.com> [170214 09:01]:
> > On Fri, Nov 11, 2016 at 1:17 PM, Tony Lindgren <tony@atomide.com> wrote:
> > > This data is now coming from device tree so we can remove the
> > > duplicate data. Let's keep the DSS and DMA related things for now
> > > until those have been converted to device tree completely.
> > >
> > > While at it, let's also add the trailing commas to data structures
> > > so further processing with scripts will be a bit easier.
> > >
> > Tony,
> >
> > I am having some errors with this patch.
> >
> > Smartreflex on a DM3730 drops a few errors:
> >
> > [ 1.209747] smartreflex smartreflex.0: invalid resource
> > [ 1.215301] smartreflex smartreflex.0: omap_sr_probe: ioremap fail
> > [ 1.221832] smartreflex smartreflex.1: invalid resource
> > [ 1.227294] smartreflex smartreflex.1: omap_sr_probe: ioremap fail
> > [ 1.233856] sr_init: platform driver register failed for SR
> >
> > I used Git bisect to narrow it down to this patch, and I confirmed it
> > manually. Sorry it took so long to get feedback on this, but I was on
> > vacation.
>
> Oh OK sorry about that.
>
> > I attempted to just add back the smartreflex stuff for the omap36xx,
> > but that didn't work. I am going to assume something is missing or
> > wrong in the device tree, but I could be wrong. If you have any
> > suggestions before I go down a rabbit hole, I am open for ideas.
>
> That's all there is to it :) You must have missed some part of it.
> Below is a fix that seems to work for me, care to test?
>
> --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> @@ -1946,6 +1946,7 @@ static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = {
> };
>
> /* l3_core -> usbhsotg interface */
> +
> static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = {
> .master = &omap3xxx_usbhsotg_hwmod,
> .slave = &omap3xxx_l3_main_hwmod,
This extra line should not be there, will remove.
Tony
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 10/14] ARM: OMAP2+: Remove legacy data from hwmod for omap3
2017-02-14 17:44 ` Tony Lindgren
2017-02-14 17:47 ` Tony Lindgren
@ 2017-02-14 17:56 ` Adam Ford
1 sibling, 0 replies; 18+ messages in thread
From: Adam Ford @ 2017-02-14 17:56 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Feb 14, 2017 at 11:44 AM, Tony Lindgren <tony@atomide.com> wrote:
> * Adam Ford <aford173@gmail.com> [170214 09:01]:
>> On Fri, Nov 11, 2016 at 1:17 PM, Tony Lindgren <tony@atomide.com> wrote:
>> > This data is now coming from device tree so we can remove the
>> > duplicate data. Let's keep the DSS and DMA related things for now
>> > until those have been converted to device tree completely.
>> >
>> > While at it, let's also add the trailing commas to data structures
>> > so further processing with scripts will be a bit easier.
>> >
>> Tony,
>>
>> I am having some errors with this patch.
>>
>> Smartreflex on a DM3730 drops a few errors:
>>
>> [ 1.209747] smartreflex smartreflex.0: invalid resource
>> [ 1.215301] smartreflex smartreflex.0: omap_sr_probe: ioremap fail
>> [ 1.221832] smartreflex smartreflex.1: invalid resource
>> [ 1.227294] smartreflex smartreflex.1: omap_sr_probe: ioremap fail
>> [ 1.233856] sr_init: platform driver register failed for SR
>>
>> I used Git bisect to narrow it down to this patch, and I confirmed it
>> manually. Sorry it took so long to get feedback on this, but I was on
>> vacation.
>
> Oh OK sorry about that.
>
>> I attempted to just add back the smartreflex stuff for the omap36xx,
>> but that didn't work. I am going to assume something is missing or
>> wrong in the device tree, but I could be wrong. If you have any
>> suggestions before I go down a rabbit hole, I am open for ideas.
>
> That's all there is to it :) You must have missed some part of it.
> Below is a fix that seems to work for me, care to test?
Damn, you're fast! :-)
I tested it and it works just fine now.
>
> Regards,
>
> Tony
>
> 8< -----------------------
> From tony Mon Sep 17 00:00:00 2001
> From: Tony Lindgren <tony@atomide.com>
> Date: Tue, 14 Feb 2017 09:33:25 -0800
> Subject: [PATCH] ARM: OMAP3: Fix smartreflex platform data regression
>
> Commit d9d9cec02835 ("ARM: OMAP2+: Remove legacy data from hwmod for
> omap3") dropped platform data that should no longer be used as we're
> booting with device tree. It turns out that smartreflex is still
> using platform data and produces the following errors during probe:
>
> smartreflex smartreflex.0: invalid resource
> smartreflex smartreflex.0: omap_sr_probe: ioremap fail
> smartreflex: probe of smartreflex.0 failed with error -22
> smartreflex smartreflex.1: invalid resource
> smartreflex smartreflex.1: omap_sr_probe: ioremap fail
> smartreflex: probe of smartreflex.1 failed with error -22
>
> Let's fix the regression by adding back the smartreflex hwmod data.
> The long term is to update the smartreflex driver to use device tree
> based probing.
>
Tested-by: Adam Ford <aford173@gmail.com>
> Reported-by: Adam Ford <aford173@gmail.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> @@ -1946,6 +1946,7 @@ static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = {
> };
>
> /* l3_core -> usbhsotg interface */
> +
> static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = {
> .master = &omap3xxx_usbhsotg_hwmod,
> .slave = &omap3xxx_l3_main_hwmod,
> @@ -2112,11 +2113,20 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
> };
>
> /* L4 CORE -> SR1 interface */
> +static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
> + {
> + .pa_start = OMAP34XX_SR1_BASE,
> + .pa_end = OMAP34XX_SR1_BASE + SZ_1K - 1,
> + .flags = ADDR_TYPE_RT,
> + },
> + { },
> +};
>
> static struct omap_hwmod_ocp_if omap34xx_l4_core__sr1 = {
> .master = &omap3xxx_l4_core_hwmod,
> .slave = &omap34xx_sr1_hwmod,
> .clk = "sr_l4_ick",
> + .addr = omap3_sr1_addr_space,
> .user = OCP_USER_MPU,
> };
>
> @@ -2124,15 +2134,25 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr1 = {
> .master = &omap3xxx_l4_core_hwmod,
> .slave = &omap36xx_sr1_hwmod,
> .clk = "sr_l4_ick",
> + .addr = omap3_sr1_addr_space,
> .user = OCP_USER_MPU,
> };
>
> /* L4 CORE -> SR1 interface */
> +static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = {
> + {
> + .pa_start = OMAP34XX_SR2_BASE,
> + .pa_end = OMAP34XX_SR2_BASE + SZ_1K - 1,
> + .flags = ADDR_TYPE_RT,
> + },
> + { },
> +};
>
> static struct omap_hwmod_ocp_if omap34xx_l4_core__sr2 = {
> .master = &omap3xxx_l4_core_hwmod,
> .slave = &omap34xx_sr2_hwmod,
> .clk = "sr_l4_ick",
> + .addr = omap3_sr2_addr_space,
> .user = OCP_USER_MPU,
> };
>
> @@ -2140,6 +2160,7 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = {
> .master = &omap3xxx_l4_core_hwmod,
> .slave = &omap36xx_sr2_hwmod,
> .clk = "sr_l4_ick",
> + .addr = omap3_sr2_addr_space,
> .user = OCP_USER_MPU,
> };
>
> --
> 2.11.1
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2017-02-14 17:56 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-11-11 19:16 [PATCH 00/14] Drop some unused omap platform_data Tony Lindgren
2016-11-11 19:16 ` [PATCH 01/14] ARM: OMAP2+: Remove legacy serial.c Tony Lindgren
2016-11-11 19:16 ` [PATCH 02/14] ARM: OMAP2+: Remove legacy i2c.c platform init code Tony Lindgren
2016-11-11 19:17 ` [PATCH 03/14] ARM: OMAP2+: Remove legacy PM init Tony Lindgren
2016-11-11 19:17 ` [PATCH 04/14] ARM: OMAP2+: Remove legacy twl4030 platform init code Tony Lindgren
2016-11-11 19:17 ` [PATCH 05/14] ARM: OMAP2+: Remove legacy usb-host.c " Tony Lindgren
2016-11-11 19:17 ` [PATCH 06/14] ARM: OMAP2+: Remove legacy muxing for usb-tusb6010.c Tony Lindgren
2016-11-11 19:17 ` [PATCH 07/14] ARM: OMAP2+: Remove legacy usb-musb.c platform init code Tony Lindgren
2016-11-11 19:17 ` [PATCH 08/14] ARM: OMAP2+: Remove legacy hwmod mux code Tony Lindgren
2016-11-11 19:17 ` [PATCH 10/14] ARM: OMAP2+: Remove legacy data from hwmod for omap3 Tony Lindgren
2017-02-14 16:59 ` Adam Ford
2017-02-14 17:44 ` Tony Lindgren
2017-02-14 17:47 ` Tony Lindgren
2017-02-14 17:56 ` Adam Ford
2016-11-11 19:17 ` [PATCH 11/14] ARM: OMAP2+: Remove legacy smsc911x and smc91x GPMC support Tony Lindgren
2016-11-11 19:17 ` [PATCH 12/14] ARM: OMAP2+: Remove legacy board-flash.c Tony Lindgren
2016-11-11 19:17 ` [PATCH 13/14] ARM: OMAP2+: Drop legacy ads7846 init Tony Lindgren
2016-11-11 19:17 ` [PATCH 14/14] ARM: OMAP2+: Drop legacy sdram timings Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).