From mboxrd@z Thu Jan 1 00:00:00 1970 From: clabbe.montjoie@gmail.com (Corentin Labbe) Date: Mon, 14 Nov 2016 13:33:50 +0100 Subject: [PATCH 3/5] net: thunderx: Fix configuration of L3/L4 length checking In-Reply-To: <1479120886-13425-4-git-send-email-sunil.kovvuri@gmail.com> References: <1479120886-13425-1-git-send-email-sunil.kovvuri@gmail.com> <1479120886-13425-4-git-send-email-sunil.kovvuri@gmail.com> Message-ID: <20161114123350.GA2449@Red> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Nov 14, 2016 at 04:24:44PM +0530, sunil.kovvuri at gmail.com wrote: > From: Sunil Goutham > > This patch fixes enabling of HW verification of L3/L4 length and > TCP/UDP checksum which is currently being cleared. Also fixed VLAN > stripping config which is being cleared when multiqset is enabled. > > Signed-off-by: Sunil Goutham > --- > drivers/net/ethernet/cavium/thunder/nicvf_queues.c | 7 +++++-- > 1 file changed, 5 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c > index f0e0ca6..3050177 100644 > --- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c > +++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c > @@ -538,9 +538,12 @@ static void nicvf_rcv_queue_config(struct nicvf *nic, struct queue_set *qs, > mbx.rq.cfg = (1ULL << 62) | (RQ_CQ_DROP << 8); > nicvf_send_msg_to_pf(nic, &mbx); > > - nicvf_queue_reg_write(nic, NIC_QSET_RQ_GEN_CFG, 0, 0x00); > - if (!nic->sqs_mode) > + if (!nic->sqs_mode && (qidx == 0)) { > + /* Enable checking L3/L4 length and TCP/UDP checksums */ > + nicvf_queue_reg_write(nic, NIC_QSET_RQ_GEN_CFG, 0, > + ((1 << 24) | (1 << 23) | (1 << 21))); Hello You could use the BIT() macro here Regards