public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] drm/sun4i: tcon: Initialize regmap after enabling bus clocks
Date: Thu, 17 Nov 2016 20:05:01 +0100	[thread overview]
Message-ID: <20161117190501.hjpwposqzidwhwdc@lukather> (raw)
In-Reply-To: <20161116093732.12828-2-wens@csie.org>

On Wed, Nov 16, 2016 at 05:37:32PM +0800, Chen-Yu Tsai wrote:
> If we attempt to read/write the TCON registers before the bus clock
> is enabled, those accesses get ignored.
> 
> In practice this almost never occurs because U-boot had already enabled
> the bus clock as part of its firmware provided framebuffer (simplefb).
> 
> Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
> 
> I was looking around the DRM driver and noticed this sequence was off.
> 
> ---
>  drivers/gpu/drm/sun4i/sun4i_tcon.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> index c6afb2448655..8c2db65ea229 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> @@ -506,16 +506,16 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
>  		return ret;
>  	}
>  
> -	ret = sun4i_tcon_init_regmap(dev, tcon);
> +	ret = sun4i_tcon_init_clocks(dev, tcon);
>  	if (ret) {
> -		dev_err(dev, "Couldn't init our TCON regmap\n");
> +		dev_err(dev, "Couldn't init our TCON clocks\n");
>  		goto err_assert_reset;
>  	}
>  
> -	ret = sun4i_tcon_init_clocks(dev, tcon);
> +	ret = sun4i_tcon_init_regmap(dev, tcon);
>  	if (ret) {
> -		dev_err(dev, "Couldn't init our TCON clocks\n");
> -		goto err_assert_reset;
> +		dev_err(dev, "Couldn't init our TCON regmap\n");
> +		goto err_free_clocks;
>  	}

That won't work either. sun4i_tcon_init_clocks requires the regmap to
be enabled before it calls sun4i_dclk_create.

Maybe we should just move that call outside of sun4i_tcon_init_clocks
and put it directly into the bind then.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161117/ac4950fb/attachment.sig>

  reply	other threads:[~2016-11-17 19:05 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-16  9:37 [PATCH] drm/sun4i: Only count TCON endpoints as valid outputs Chen-Yu Tsai
2016-11-16  9:37 ` [PATCH] drm/sun4i: tcon: Initialize regmap after enabling bus clocks Chen-Yu Tsai
2016-11-17 19:05   ` Maxime Ripard [this message]
2016-11-18  2:09     ` Chen-Yu Tsai
2016-11-17 19:02 ` [PATCH] drm/sun4i: Only count TCON endpoints as valid outputs Maxime Ripard
2016-11-18  2:22   ` Chen-Yu Tsai
2016-11-22 15:37     ` Maxime Ripard
2016-11-23 14:19       ` Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161117190501.hjpwposqzidwhwdc@lukather \
    --to=maxime.ripard@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox