From mboxrd@z Thu Jan 1 00:00:00 1970 From: f.fainelli@gmail.com (Florian Fainelli) Date: Mon, 21 Nov 2016 21:48:24 -0800 Subject: [GIT PULL 6/6] Broadcom defconfig-arm64 changes for 4.10 In-Reply-To: <20161122054824.16974-1-f.fainelli@gmail.com> References: <20161122054824.16974-1-f.fainelli@gmail.com> Message-ID: <20161122054824.16974-6-f.fainelli@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The following changes since commit 1001354ca34179f3db924eb66672442a173147dc: Linux 4.9-rc1 (2016-10-15 12:17:50 -0700) are available in the git repository at: http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.10/defconfig-arm64 for you to fetch changes up to 9efacfc80902c6ddf538a2f396e0112c1f6d1e23: Merge tag 'bcm2835-defconfig-64-next-2016-11-18' into defconfig-arm64/next (2016-11-21 21:22:55 -0800) ---------------------------------------------------------------- This pull request contains Broadcom ARM64-based SoCs defconfig changes for 4.10, please pull the following changes: - Eric updates the ARMv8 defconfig to contain everything that is needed to run a 64-bit kernel on the Raspberry Pi 3 - Scott enables the standard AT25 EEPROM driver as module for the ARM64 defconfig - Martin enables the Raspberry Pi Thermal driver in the ARM64 defconfig ---------------------------------------------------------------- Eric Anholt (1): arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Florian Fainelli (2): Merge tag 'bcm2835-defconfig-64-next-2016-09-22' into defconfig-arm64/next Merge tag 'bcm2835-defconfig-64-next-2016-11-18' into defconfig-arm64/next Martin Sperl (1): ARM64: bcm2835: add thermal driver to default config Scott Branden (1): arm64: defconfig: enable EEPROM_AT25 config option arch/arm64/configs/defconfig | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)