From: khilman@baylibre.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] ARM: dts: davinci: da850-lcdk: enable VPIF capture via TVP5147
Date: Tue, 22 Nov 2016 11:45:50 -0800 [thread overview]
Message-ID: <20161122194551.3420-4-khilman@baylibre.com> (raw)
In-Reply-To: <20161122194551.3420-1-khilman@baylibre.com>
Enable video capture via the on-board TVP5147 decoder hooked up to ch0
one of the VPIF capture input.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
arch/arm/boot/dts/da850-lcdk.dts | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 03f9bfda5385..39db2ffa1902 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -138,6 +138,24 @@
reg = <0x18>;
status = "okay";
};
+
+ tvp5147 at 5d {
+ compatible = "ti,tvp5147";
+ reg = <0x5d>;
+ status = "okay";
+
+ port {
+ composite: endpoint {
+ hsync-active = <1>;
+ vsync-active = <1>;
+ pclk-sample = <0>;
+
+ /* VPIF channel 0 (lower 8-bits) */
+ remote-endpoint = <&vpif_ch0>;
+ bus-width = <8>;
+ };
+ };
+ };
};
&mcasp0 {
@@ -227,3 +245,15 @@
};
};
};
+
+&vpif {
+ status = "okay";
+};
+
+&vpif_capture {
+ status = "okay";
+};
+
+&vpif_ch0 {
+ remote-endpoint = <&composite>;
+};
--
2.9.3
next prev parent reply other threads:[~2016-11-22 19:45 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-22 19:45 [PATCH 0/4] ARM: davinci: add/enable video capture for da850-lcdk Kevin Hilman
2016-11-22 19:45 ` [PATCH 1/4] ARM: davinci: da8xx: VPIF: enable DT init Kevin Hilman
2016-11-22 20:06 ` David Lechner
2016-11-23 5:38 ` Kevin Hilman
2016-11-22 19:45 ` [PATCH 2/4] ARM: dts: davinci: da850: add VPIF Kevin Hilman
2016-11-22 20:00 ` David Lechner
2016-11-23 5:43 ` Kevin Hilman
2016-11-23 8:27 ` Sekhar Nori
2016-11-23 15:35 ` Kevin Hilman
2016-11-22 19:45 ` Kevin Hilman [this message]
2016-11-22 19:45 ` [PATCH 4/4] ARM: davinci_all_defconfig: enable video capture as modules Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161122194551.3420-4-khilman@baylibre.com \
--to=khilman@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox