[PATCH 0/2] ARM: dts: sun6i: Disable display pipeline by default

[PATCH 0/2] ARM: dts: sun6i: Disable display pipeline by default

[Chen-Yu Tsai]

Hi,

While we now support the internal display pipeline found on sun6i, it
is possible that we are unable to enable the display for some boards,
due to a lack of drivers for the panels or bridges found on them. If
the display pipeline is enabled, the driver will try to enable, and
possibly screw up the simple framebuffer U-boot had configured.

This series disables the display pipeline by default, and re-enables
it for the A31 Hummingbird, which already had its display pipeline
enabled.

The series can go in after 4.10-rc1, as a fix, but should not be delayed
till the next release.

Regards
ChenYu

Chen-Yu Tsai (2):
  ARM: dts: sun6i: Disable display pipeline by default
  ARM: dts: sun6i: hummingbird: Enable display engine again

 arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 4 ++++
 arch/arm/boot/dts/sun6i-a31.dtsi            | 1 +
 2 files changed, 5 insertions(+)

-- 
2.10.2

[PATCH 1/2] ARM: dts: sun6i: Disable display pipeline by default

[Chen-Yu Tsai]

While we now support the internal display pipeline found on sun6i, it
is possible that we are unable to enable the display for some boards,
due to a lack of drivers for the panels or bridges found on them. If
the display pipeline is enabled, the driver will try to enable, and
possibly screw up the simple framebuffer U-boot had configured.

Disable the display pipeline by default.

Fixes: 6d0e5b70be13 ("ARM: dts: sun6i: Add device nodes for first
		      display pipeline")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun6i-a31.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 20a0331ddfb5..4662d3344cd2 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -234,6 +234,7 @@
 	de: display-engine {
 		compatible = "allwinner,sun6i-a31-display-engine";
 		allwinner,pipelines = <&fe0>;
+		status = "disabled";
 	};
 
 	soc at 01c00000 {
-- 
2.10.2

[PATCH 2/2] ARM: dts: sun6i: hummingbird: Enable display engine again

[Chen-Yu Tsai]

Now that we disable the display engine by default, we need to re-enable
it for the Hummingbird A31, which already had its display pipeline
enabled.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index b168d6df2b30..83643bbd51dc 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -140,6 +140,10 @@
 	cpu-supply = <&reg_dcdc3>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
-- 
2.10.2

[PATCH 0/2] ARM: dts: sun6i: Disable display pipeline by default

[Maxime Ripard]

On Thu, Nov 24, 2016 at 02:43:37PM +0800, Chen-Yu Tsai wrote:
> Hi,
> 
> While we now support the internal display pipeline found on sun6i, it
> is possible that we are unable to enable the display for some boards,
> due to a lack of drivers for the panels or bridges found on them. If
> the display pipeline is enabled, the driver will try to enable, and
> possibly screw up the simple framebuffer U-boot had configured.
> 
> This series disables the display pipeline by default, and re-enables
> it for the A31 Hummingbird, which already had its display pipeline
> enabled.
> 
> The series can go in after 4.10-rc1, as a fix, but should not be delayed
> till the next release.

Applied both, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161124/fc6a71f2/attachment.sig>