From: robert.richter@cavium.com (Robert Richter)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V1 1/2] PCI: thunder: Enable ACPI PCI controller for ThunderX pass2.x silicon version
Date: Thu, 1 Dec 2016 14:55:49 +0100 [thread overview]
Message-ID: <20161201135549.GP2213@rric.localdomain> (raw)
In-Reply-To: <eba92ea8-bdab-9a3a-7b18-caaeac15db5d@semihalf.com>
Tomasz, Bjorn,
On 01.12.16 09:49:51, Tomasz Nowicki wrote:
> I put the picture together here (on top of your pci/ecam branch):
> [1] https://github.com/semihalf-nowicki-tomasz/linux/commits/pci-quirks-thunderx-v2
please note that acpi_* functions must be protected with acpi_disabled
or something else to make sure an acpi enabled kernel does not break
dt. See the crash below with above branch.
-Robert
[ 12.493028] Unable to handle kernel NULL pointer dereference at virtual address 00000018
[ 12.501113] pgd = ffff0000090a0000
[ 12.504511] [00000018] *pgd=0000010fffef0003[ 12.508602] , *pud=0000010fffef0003
, *pmd=0000010fffee0003[ 12.514093] , *pte=0000000000000000
[ 12.517575]
[ 12.519064] Internal error: Oops: 96000005 [#1] SMP
[ 12.523933] Modules linked in:
[ 12.526987] CPU: 73 PID: 1 Comm: swapper/0 Tainted: G W 4.9.0-rc6.0.vanilla10-00019-g09abd2b6bbeb #135
[ 12.537409] Hardware name: Cavium ThunderX CRB/To be filled by O.E.M., BIOS 5.11 12/12/2012
[ 12.545748] task: ffff800fe85b8000 task.stack: ffff800ff4288000
[ 12.551674] PC is at acpi_ns_walk_namespace+0x68/0x1d4
[ 12.556803] LR is at acpi_get_devices+0x6c/0x94
...
[ 13.124920] [<ffff0000084dc5a0>] acpi_ns_walk_namespace+0x68/0x1d4
[ 13.131090] [<ffff0000084dcadc>] acpi_get_devices+0x6c/0x94
[ 13.136663] [<ffff0000084c0aec>] acpi_resource_consumer+0x34/0x44
[ 13.142752] [<ffff000008496bc0>] pci_ecam_create+0x80/0x228
[ 13.148314] [<ffff000008498e64>] pci_host_common_probe+0x294/0x348
[ 13.154486] [<ffff00000849bf3c>] thunder_ecam_probe+0x2c/0x38
[ 13.160226] [<ffff0000085880b8>] platform_drv_probe+0x60/0xc8
[ 13.165970] [<ffff000008585a04>] driver_probe_device+0x26c/0x420
[ 13.171966] [<ffff000008585cdc>] __driver_attach+0x124/0x128
[ 13.177615] [<ffff000008583238>] bus_for_each_dev+0x70/0xb0
[ 13.183177] [<ffff000008585060>] driver_attach+0x30/0x40
[ 13.188478] [<ffff000008584a98>] bus_add_driver+0x200/0x2b8
[ 13.194041] [<ffff000008586860>] driver_register+0x68/0x100
[ 13.199602] [<ffff000008587fdc>] __platform_driver_register+0x54/0x60
[ 13.206038] [<ffff000008c39b98>] thunder_ecam_driver_init+0x18/0x20
[ 13.212296] [<ffff000008082d94>] do_one_initcall+0x44/0x138
[ 13.217862] [<ffff000008c00d0c>] kernel_init_freeable+0x1ac/0x24c
[ 13.223950] [<ffff0000088605f0>] kernel_init+0x18/0x110
[ 13.229165] [<ffff000008082b30>] ret_from_fork+0x10/0x20
next prev parent reply other threads:[~2016-12-01 13:55 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-15 9:14 [PATCH V1 0/2] Add support for ThunderX SoCs ACPI Host Controllers Tomasz Nowicki
2016-11-15 9:14 ` [PATCH V1 1/2] PCI: thunder: Enable ACPI PCI controller for ThunderX pass2.x silicon version Tomasz Nowicki
2016-12-01 0:28 ` Bjorn Helgaas
2016-12-01 1:00 ` Sinan Kaya
2016-12-01 3:48 ` Bjorn Helgaas
2016-12-01 4:26 ` Sinan Kaya
2016-12-01 8:49 ` Tomasz Nowicki
2016-12-01 13:55 ` Robert Richter [this message]
2016-12-01 14:54 ` Lorenzo Pieralisi
2016-12-01 17:52 ` Bjorn Helgaas
2016-12-01 17:14 ` Bjorn Helgaas
2016-12-01 16:57 ` Bjorn Helgaas
2016-12-02 5:50 ` Jon Masters
2016-12-02 6:42 ` [Linaro-acpi] " Duc Dang
2016-12-02 6:45 ` Jon Masters
2016-12-02 10:06 ` Tomasz Nowicki
2016-12-02 10:45 ` Robert Richter
2016-12-02 16:27 ` Bjorn Helgaas
2016-12-08 16:34 ` Robert Richter
2016-11-15 9:14 ` [PATCH V1 2/2] PCI: thunder: Enable ACPI PCI controller for ThunderX pass1.x " Tomasz Nowicki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161201135549.GP2213@rric.localdomain \
--to=robert.richter@cavium.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox