From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawnguo@kernel.org (Shawn Guo) Date: Sat, 3 Dec 2016 17:22:55 +0800 Subject: [PATCH v2 1/2] arm64: dts: zx: Fix gic GICR property In-Reply-To: References: <1476361881-19685-1-git-send-email-jun.nie@linaro.org> <1476361881-19685-2-git-send-email-jun.nie@linaro.org> Message-ID: <20161203092251.GA17375@dragon> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Dec 02, 2016 at 05:02:28PM +0000, Marc Zyngier wrote: > Just noticed this. > > On 13/10/16 13:31, Jun Nie wrote: > > GICR for multiple CPU can be described with start address and stride, > > or with multiple address. Current multiple address and stride are > > both used. Fix it. > > > > vmalloc patch 727a7f5a9 triggered this bug: > > [ 0.097146] Unable to handle kernel paging request at virtual address ffff000008060008 > > [ 0.097150] pgd = ffff000008602000 > > [ 0.097160] [ffff000008060008] *pgd=000000007fffe003, *pud=000000007fffd003, *pmd=000000007fffc003, *pte=0000000000000000 > > [ 0.097165] Internal error: Oops: 96000007 [#1] PREEMPT SMP > > [ 0.097170] Modules linked in: > > [ 0.097177] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0+ #1474 > > [ 0.097179] Hardware name: ZTE zx296718 evaluation board (DT) > > [ 0.097183] task: ffff80003e8c8b80 task.stack: ffff80003e8d0000 > > [ 0.097197] PC is at gic_populate_rdist+0x74/0x15c > > [ 0.097202] LR is at gic_starting_cpu+0xc/0x20 > > [ 0.097206] pc : [] lr : [] pstate: 600001c5 > > > > Signed-off-by: Jun Nie > > --- > > arch/arm64/boot/dts/zte/zx296718.dtsi | 11 +++-------- > > 1 file changed, 3 insertions(+), 8 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi > > index a223066..6b239a3 100644 > > --- a/arch/arm64/boot/dts/zte/zx296718.dtsi > > +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi > > @@ -239,16 +239,11 @@ > > compatible = "arm,gic-v3"; > > #interrupt-cells = <3>; > > #address-cells = <0>; > > - #redistributor-regions = <6>; > > - redistributor-stride = <0x0 0x40000>; > > + #redistributor-regions = <1>; > > + redistributor-stride = <0x20000>; > > Why is that stride specified? Is the GIC implementation so busted that > the GICR_TYPER do not report a GICv3 redistributor, which implies a > 128kB stride? No, it's not required per my testing. I guess it's there for documentation purpose to make the stride setting explicit. Are you suggesting that we simply drop it? Also, it seems that #redistributor-regions can also be saved, since bindings doc tells that it's only required if more than one such region is present? Shawn