From mboxrd@z Thu Jan  1 00:00:00 1970
From: jon.mason@broadcom.com (Jon Mason)
Date: Tue, 6 Dec 2016 14:59:22 -0500
Subject: [PATCH 3/5] ARM: BCM5301X: Set GPIO enabling USB power on
 Netgear R7000
In-Reply-To: <20161206171714.22738-3-zajec5@gmail.com>
References: <20161206171714.22738-1-zajec5@gmail.com>
 <20161206171714.22738-3-zajec5@gmail.com>
Message-ID: <20161206195921.GA2768@broadcom.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Tue, Dec 06, 2016 at 06:17:12PM +0100, Rafa? Mi?ecki wrote:
> There is one GPIO controlling power for both USB ports.
> 
> Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
> Signed-off-by: Rafa? Mi?ecki <rafal@milecki.pl>

Was the double Signed-off-by intentional?

> ---
>  arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
> index 0225d82..7ab1176 100644
> --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
> +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
> @@ -100,3 +100,11 @@
>  		};
>  	};
>  };
> +
> +&usb2 {
> +	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&usb3 {
> +	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
> +};
> -- 
> 2.10.1
>