From: fu.wei@linaro.org (fu.wei at linaro.org)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v18 10/15] clocksource/drivers/arm_arch_timer: Refactor the timer init code to prepare for GTDT
Date: Fri, 9 Dec 2016 01:33:14 +0800 [thread overview]
Message-ID: <20161208173319.6618-11-fu.wei@linaro.org> (raw)
In-Reply-To: <20161208173319.6618-1-fu.wei@linaro.org>
From: Fu Wei <fu.wei@linaro.org>
The patch refactor original memory-mapped timer init code:
(1) Refactor "arch_timer_mem_init", make it become a common code for
memory-mapped timer init.
(2) Add a new function "arch_timer_mem_of_init" for DT init.
Signed-off-by: Fu Wei <fu.wei@linaro.org>
---
drivers/clocksource/arm_arch_timer.c | 130 ++++++++++++++++++++++++-----------
1 file changed, 88 insertions(+), 42 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 8c813da..b02a406 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -915,17 +915,17 @@ static int __init arch_timer_of_init(struct device_node *np)
CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
-static int __init arch_timer_mem_init(struct device_node *np)
+static int __init arch_timer_mem_init(struct arch_timer_mem *timer_mem)
{
- struct device_node *frame, *best_frame = NULL;
void __iomem *cntctlbase, *base;
- unsigned int irq, ret = -EINVAL;
+ struct arch_timer_mem_frame *best_frame = NULL;
+ unsigned int irq;
u32 cnttidr;
+ int i, ret;
- arch_timers_present |= ARCH_TIMER_TYPE_MEM;
- cntctlbase = of_iomap(np, 0);
+ cntctlbase = ioremap(timer_mem->cntctlbase, timer_mem->size);
if (!cntctlbase) {
- pr_err("Can't find CNTCTLBase\n");
+ pr_err("Can't map CNTCTLBase.\n");
return -ENXIO;
}
@@ -935,26 +935,18 @@ static int __init arch_timer_mem_init(struct device_node *np)
* Try to find a virtual capable frame. Otherwise fall back to a
* physical capable frame.
*/
- for_each_available_child_of_node(np, frame) {
- int n;
- u32 cntacr;
-
- if (of_property_read_u32(frame, "frame-number", &n)) {
- pr_err("Missing frame-number\n");
- of_node_put(frame);
- goto out;
- }
+ for (i = 0; i < timer_mem->num_frames; i++) {
+ u32 cntacr = CNTACR_RFRQ | CNTACR_RWPT | CNTACR_RPCT |
+ CNTACR_RWVT | CNTACR_RVOFF | CNTACR_RVCT;
+ int n = timer_mem->frame[i].frame_nr;
/* Try enabling everything, and see what sticks */
- cntacr = CNTACR_RFRQ | CNTACR_RWPT | CNTACR_RPCT |
- CNTACR_RWVT | CNTACR_RVOFF | CNTACR_RVCT;
writel_relaxed(cntacr, cntctlbase + CNTACR(n));
cntacr = readl_relaxed(cntctlbase + CNTACR(n));
if ((cnttidr & CNTTIDR_VIRT(n)) &&
!(~cntacr & (CNTACR_RWVT | CNTACR_RVCT))) {
- of_node_put(best_frame);
- best_frame = frame;
+ best_frame = &timer_mem->frame[i];
arch_timer_mem_use_virtual = true;
break;
}
@@ -962,50 +954,104 @@ static int __init arch_timer_mem_init(struct device_node *np)
if (~cntacr & (CNTACR_RWPT | CNTACR_RPCT))
continue;
- of_node_put(best_frame);
- best_frame = of_node_get(frame);
+ best_frame = &timer_mem->frame[i];
}
+ iounmap(cntctlbase);
- ret= -ENXIO;
- base = arch_counter_base = of_iomap(best_frame, 0);
- if (!base) {
- pr_err("Can't map frame's registers\n");
- goto out;
+ if (!best_frame) {
+ pr_err("Can't find frame for register\n");
+ return -EINVAL;
}
if (arch_timer_mem_use_virtual)
- irq = irq_of_parse_and_map(best_frame, ARCH_TIMER_VIRT_SPI);
+ irq = best_frame->virt_irq;
else
- irq = irq_of_parse_and_map(best_frame, ARCH_TIMER_PHYS_SPI);
+ irq = best_frame->phys_irq;
- ret = -EINVAL;
if (!irq) {
pr_err("Frame missing %s irq",
arch_timer_mem_use_virtual ? "virt" : "phys");
- goto out;
+ return -EINVAL;
}
- /*
- * Try to determine the frequency from the device tree,
- * if fail, get the frequency from CNTFRQ.
- */
- if (!arch_timer_rate &&
- of_property_read_u32(np, "clock-frequency", &arch_timer_rate))
- arch_timer_mem_detect_rate(base);
+ base = ioremap(best_frame->cntbase, best_frame->size);
+ if (!base) {
+ pr_err("Can't map frame's registers\n");
+ return -ENXIO;
+ }
+
+ arch_timer_mem_detect_rate(base);
ret = arch_timer_mem_register(base, irq);
- if (ret)
+ if (ret) {
+ iounmap(base);
+ return ret;
+ }
+
+ arch_counter_base = base;
+ arch_timers_present |= ARCH_TIMER_TYPE_MEM;
+
+ return 0;
+}
+
+static int __init arch_timer_mem_of_init(struct device_node *np)
+{
+ struct arch_timer_mem *timer_mem;
+ struct device_node *frame_node;
+ struct resource res;
+ int i, ret = -EINVAL;
+
+ timer_mem = kzalloc(sizeof(*timer_mem), GFP_KERNEL);
+ if (!timer_mem)
+ return -ENOMEM;
+
+ if (of_address_to_resource(np, 0, &res))
goto out;
+ timer_mem->cntctlbase = res.start;
+ timer_mem->size = resource_size(&res);
+
+ i = 0;
+ for_each_available_child_of_node(np, frame_node) {
+ int n;
+ struct arch_timer_mem_frame *frame = &timer_mem->frame[i];
+
+ if (of_property_read_u32(frame_node, "frame-number", &n)) {
+ pr_err("Missing frame-number\n");
+ of_node_put(frame_node);
+ goto out;
+ }
+ frame->frame_nr = n;
+
+ if (of_address_to_resource(frame_node, 0, &res)) {
+ of_node_put(frame_node);
+ goto out;
+ }
+ frame->cntbase = res.start;
+ frame->size = resource_size(&res);
+
+ frame->virt_irq = irq_of_parse_and_map(frame_node,
+ ARCH_TIMER_VIRT_SPI);
+ frame->phys_irq = irq_of_parse_and_map(frame_node,
+ ARCH_TIMER_PHYS_SPI);
- if (!arch_timer_needs_of_probing())
+ if (++i >= ARCH_TIMER_MEM_MAX_FRAMES)
+ break;
+ }
+ timer_mem->num_frames = i;
+
+ /* Try to determine the frequency from the device tree */
+ if (!arch_timer_rate)
+ of_property_read_u32(np, "clock-frequency", &arch_timer_rate);
+
+ ret = arch_timer_mem_init(timer_mem);
+ if (!ret && !arch_timer_needs_of_probing())
ret = arch_timer_common_init();
out:
- iounmap(cntctlbase);
- of_node_put(best_frame);
+ kfree(timer_mem);
return ret;
}
CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
- arch_timer_mem_init);
+ arch_timer_mem_of_init);
#ifdef CONFIG_ACPI
static int __init map_generic_timer_interrupt(u32 interrupt, u32 flags)
--
2.9.3
next prev parent reply other threads:[~2016-12-08 17:33 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-08 17:33 [PATCH v18 00/15] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer fu.wei at linaro.org
2016-12-08 17:33 ` [PATCH v18 01/15] clocksource/drivers/arm_arch_timer: Move enums and defines to header file fu.wei at linaro.org
2016-12-08 17:33 ` [PATCH v18 02/15] clocksource/drivers/arm_arch_timer: Add a new enum for spi type fu.wei at linaro.org
2016-12-08 17:33 ` [PATCH v18 03/15] clocksource/drivers/arm_arch_timer: Improve printk relevant code fu.wei at linaro.org
2016-12-08 21:10 ` Joe Perches
2016-12-09 8:24 ` Fu Wei
2016-12-08 17:33 ` [PATCH v18 04/15] clocksource/drivers/arm_arch_timer: rename some enums and defines fu.wei at linaro.org
2016-12-08 17:33 ` [PATCH v18 05/15] clocksource/drivers/arm_arch_timer: rework PPI determination fu.wei at linaro.org
2016-12-08 17:33 ` [PATCH v18 06/15] clocksource/drivers/arm_arch_timer: Rework counter frequency detection fu.wei at linaro.org
2016-12-08 17:33 ` [PATCH v18 07/15] clocksource/drivers/arm_arch_timer: Refactor arch_timer_needs_probing fu.wei at linaro.org
2016-12-08 17:33 ` [PATCH v18 08/15] clocksource/drivers/arm_arch_timer: move arch_timer_needs_of_probing into DT init call fu.wei at linaro.org
2016-12-08 17:33 ` [PATCH v18 09/15] clocksource/drivers/arm_arch_timer: Introduce some new structs to prepare for GTDT fu.wei at linaro.org
2016-12-08 17:33 ` fu.wei at linaro.org [this message]
2016-12-08 17:33 ` [PATCH v18 11/15] acpi/arm64: Add GTDT table parse driver fu.wei at linaro.org
2016-12-08 17:33 ` [PATCH v18 12/15] clocksource/drivers/arm_arch_timer: Simplify ACPI support code fu.wei at linaro.org
2016-12-08 17:33 ` [PATCH v18 13/15] acpi/arm64: Add memory-mapped timer support in GTDT driver fu.wei at linaro.org
2016-12-08 17:33 ` [PATCH v18 14/15] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer fu.wei at linaro.org
2016-12-08 17:33 ` [PATCH v18 15/15] acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver fu.wei at linaro.org
2017-01-13 19:29 ` [PATCH v18 00/15] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer Mark Rutland
2017-01-14 11:34 ` Fu Wei
2017-01-16 0:54 ` Fu Wei
2017-01-16 11:59 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161208173319.6618-11-fu.wei@linaro.org \
--to=fu.wei@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).