From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Thu, 22 Dec 2016 18:25:00 +0100 Subject: [PATCH 5/6] ARM64: dts: marvell: Add pinctrl nodes for Armada 3700 In-Reply-To: <20161222172501.16121-1-gregory.clement@free-electrons.com> References: <20161222172501.16121-1-gregory.clement@free-electrons.com> Message-ID: <20161222172501.16121-6-gregory.clement@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add the nodes for the two pin controller present in the Armada 37xx SoCs. Initially the node was named gpio1 using the same name that for the register range in the datasheet. However renaming it pinctr_nb (nb for North Bridge) makes more sens. Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 30 +++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 926a4024c3dd..682ec009121c 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -157,16 +157,40 @@ #clock-cells = <1>; }; - gpio1: gpio at 13800 { - compatible = "marvell,mvebu-gpio-3700", + pinctrl_nb: pinctrl-nb at 13800 { + compatible = "marvell,armada3710-nb-pinctrl", "syscon", "simple-mfd"; - reg = <0x13800 0x500>; + reg = <0x13800 0x100>, <0x13C00 0x20>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; xtalclk: xtal-clk { compatible = "marvell,armada-3700-xtal-clock"; clock-output-names = "xtal"; #clock-cells = <0>; }; + }; + }; + + pinctrl_sb: pinctrl-sb at 18800 { + compatible = "marvell,armada3710-sb-pinctrl", + "syscon", "simple-mfd"; + reg = <0x18800 0x100>, <0x18C00 0x20>; + interrupts = , + , + , + , + ; }; eth0: ethernet at 30000 { -- 2.11.0