[PATCH 6/6] ARM64: dts: marvell: armada37xx: add pinctrl definition

[gregory.clement@free-electrons.com (Gregory CLEMENT)]

Start to populate the device tree of the Armada 37xx with the pincontrol
configuration used on the board providing a dts.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 arch/arm64/boot/dts/marvell/armada-3720-db.dts |  8 +++++++
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi   | 32 +++++++++++++++++++++++++-
 2 files changed, 39 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 935d37f82ce8..cf262b8ec4ad 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -63,6 +63,8 @@
 };
 
 &i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 };
 
@@ -73,6 +75,8 @@
 
 &spi0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
 
 	m25p80 at 0 {
 		compatible = "jedec,spi-nor";
@@ -103,6 +107,8 @@
 
 /* Exported on the micro USB connector CON32 through an FTDI */
 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
 	status = "okay";
 };
 
@@ -128,6 +134,8 @@
 };
 
 &eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
 	phy-mode = "rgmii-id";
 	phy = <&phy0>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 682ec009121c..120e1b82c8b0 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -179,8 +179,32 @@
 					clock-output-names = "xtal";
 					#clock-cells = <0>;
 				};
+
+				spi_quad_pins: spi-quad-pins {
+					groups = "spi_quad";
+					function = "spi";
 				};
-			};
+
+				i2c1_pins: i2c1-pins {
+					groups = "i2c1";
+					function = "i2c";
+				};
+
+				i2c2_pins: i2c2-pins {
+					groups = "i2c2";
+					function = "i2c";
+				};
+
+				uart1_pins: uart1-pins {
+					groups = "uart1";
+					function = "uart";
+				};
+
+				uart2_pins: uart2-pins {
+					groups = "uart2";
+					function = "uart";
+				};
+};
 
 			pinctrl_sb: pinctrl-sb at 18800 {
 				compatible = "marvell,armada3710-sb-pinctrl",
@@ -191,6 +215,12 @@
 					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+
+				rgmii_pins: mii-pins {
+					groups = "rgmii";
+					function = "mii";
+				};
+
 			};
 
 			eth0: ethernet at 30000 {
-- 
2.11.0