From: chris.packham@alliedtelesis.co.nz (Chris Packham)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 0/5] Support for Marvell switches with integrated CPUs
Date: Thu, 5 Jan 2017 16:36:36 +1300 [thread overview]
Message-ID: <20170105033641.6212-1-chris.packham@alliedtelesis.co.nz> (raw)
The 98DX3236, 98DX3336 and 98DX4251 are a set of switch ASICs with
integrated CPUs. They CPU block is common within these product lines and
(as far as I can tell/have been told) is based on the Armada XP. There
are a few differences due to the fact they have to squeeze the CPU into
the same package as the switch.
Chris Packham (4):
clk: mvebu: support for 98DX3236 SoC
arm: mvebu: support for SMP on 98DX3336 SoC
arm: mvebu: Add device tree for 98DX3236 SoCs
arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards
Kalyan Kinthada (1):
pinctrl: mvebu: pinctrl driver for 98DX3236 SoC
Documentation/devicetree/bindings/arm/cpus.txt | 1 +
.../bindings/arm/marvell/98dx3236-resume-ctrl.txt | 18 ++
.../devicetree/bindings/arm/marvell/98dx3236.txt | 23 ++
.../devicetree/bindings/clock/mvebu-cpu-clock.txt | 1 +
.../pinctrl/marvell,armada-98dx3236-pinctrl.txt | 46 ++++
arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 247 +++++++++++++++++++++
arch/arm/boot/dts/armada-xp-98dx3336.dtsi | 78 +++++++
arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 92 ++++++++
arch/arm/boot/dts/db-dxbc2.dts | 159 +++++++++++++
arch/arm/boot/dts/db-xc3-24g4xg.dts | 155 +++++++++++++
arch/arm/mach-mvebu/Makefile | 1 +
arch/arm/mach-mvebu/common.h | 1 +
arch/arm/mach-mvebu/platsmp.c | 43 ++++
arch/arm/mach-mvebu/pmsu-98dx3236.c | 69 ++++++
drivers/clk/mvebu/Makefile | 2 +-
drivers/clk/mvebu/armada-xp.c | 42 ++++
drivers/clk/mvebu/clk-cpu.c | 33 ++-
drivers/clk/mvebu/mv98dx3236-corediv.c | 207 +++++++++++++++++
drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 155 +++++++++++++
19 files changed, 1369 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
create mode 100644 arch/arm/boot/dts/armada-xp-98dx3236.dtsi
create mode 100644 arch/arm/boot/dts/armada-xp-98dx3336.dtsi
create mode 100644 arch/arm/boot/dts/armada-xp-98dx4251.dtsi
create mode 100644 arch/arm/boot/dts/db-dxbc2.dts
create mode 100644 arch/arm/boot/dts/db-xc3-24g4xg.dts
create mode 100644 arch/arm/mach-mvebu/pmsu-98dx3236.c
create mode 100644 drivers/clk/mvebu/mv98dx3236-corediv.c
--
2.11.0.24.ge6920cf
next reply other threads:[~2017-01-05 3:36 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-05 3:36 Chris Packham [this message]
2017-01-05 3:36 ` [PATCHv2 1/5] clk: mvebu: support for 98DX3236 SoC Chris Packham
2017-01-05 13:53 ` Mark Rutland
2017-01-05 23:05 ` Chris Packham
2017-01-05 3:36 ` [PATCHv2 2/5] arm: mvebu: support for SMP on 98DX3336 SoC Chris Packham
2017-01-05 4:04 ` Florian Fainelli
2017-01-05 4:46 ` Chris Packham
2017-01-05 20:49 ` Chris Packham
2017-01-05 3:36 ` [PATCHv2 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC Chris Packham
2017-01-05 3:36 ` [PATCHv2 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs Chris Packham
2017-01-05 4:06 ` Florian Fainelli
2017-01-05 4:34 ` Chris Packham
2017-01-05 13:58 ` Mark Rutland
2017-01-05 20:10 ` Chris Packham
2017-01-05 3:36 ` [PATCHv2 5/5] arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards Chris Packham
2017-01-05 4:07 ` [PATCHv2 0/5] Support for Marvell switches with integrated CPUs Florian Fainelli
2017-01-05 4:24 ` Chris Packham
2017-01-05 13:09 ` Andrew Lunn
2017-01-05 14:07 ` Marcin Wojtas
2017-01-05 19:46 ` Chris Packham
2017-01-05 19:52 ` Florian Fainelli
2017-01-05 14:09 ` Marcin Wojtas
2017-01-05 20:02 ` Chris Packham
2017-01-06 4:14 ` Chris Packham
2017-01-06 4:14 ` [PATCHv3 1/5] clk: mvebu: support for 98DX3236 SoC Chris Packham
2017-01-09 18:39 ` Rob Herring
2017-01-06 4:14 ` [PATCHv3 2/5] arm: mvebu: support for SMP on 98DX3336 SoC Chris Packham
2017-01-06 6:36 ` Stephen Boyd
2017-01-06 8:41 ` Chris Packham
2017-01-09 18:40 ` Rob Herring
2017-01-06 4:15 ` [PATCHv3 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC Chris Packham
2017-01-09 18:41 ` Rob Herring
2017-01-11 14:44 ` Linus Walleij
2017-01-11 20:55 ` Sebastian Hesselbarth
2017-01-12 9:13 ` Chris Packham
2017-01-06 4:15 ` [PATCHv3 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs Chris Packham
2017-01-09 18:44 ` Rob Herring
2017-01-26 15:09 ` Gregory CLEMENT
2017-01-26 20:07 ` Chris Packham
2017-01-26 20:24 ` Chris Packham
2017-01-26 22:52 ` Chris Packham
2017-01-06 4:15 ` [PATCHv3 5/5] arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards Chris Packham
2017-01-26 15:12 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170105033641.6212-1-chris.packham@alliedtelesis.co.nz \
--to=chris.packham@alliedtelesis.co.nz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).