From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Thu, 5 Jan 2017 18:14:06 +0100 Subject: [PATCH] ARM: dts: sunxi: Use axp209.dtsi for Olinuxino Lime2 In-Reply-To: <20161227102238.20110-1-manu@bidouilliste.com> References: <20161227102238.20110-1-manu@bidouilliste.com> Message-ID: <20170105171406.s5xpbtcpe4esn6iz@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Dec 27, 2016 at 11:22:38AM +0100, Emmanuel Vadot wrote: > Use axp209.dtsi in sun7i-a20-olinuxino-lime2.dts and correct > some regulators. > > DCDC2 is used for vdd-cpu so it should never be bellow 1V and above 1.4V > DCDC3 is used for VDD_INT so same as above. > LD01 is used for the RTC, and should have a typical value of 1.3V > LD02 is used for AVCC and should have a typical value of 3.0V > LD03/4 are used for Port-E/Port-G Power pin, and the schematics recommands > to set them to 2.8V as they can be used for CSI0/1. > > Signed-off-by: Emmanuel Vadot Applied, thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: