From mboxrd@z Thu Jan  1 00:00:00 1970
From: davem@davemloft.net (David Miller)
Date: Fri, 06 Jan 2017 15:53:12 -0500 (EST)
Subject: [PATCH] net: phy: dp83867: fix irq generation
In-Reply-To: <20170105204807.25990-1-grygorii.strashko@ti.com>
References: <20170105204807.25990-1-grygorii.strashko@ti.com>
Message-ID: <20170106.155312.809445938921144548.davem@davemloft.net>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

From: Grygorii Strashko <grygorii.strashko@ti.com>
Date: Thu, 5 Jan 2017 14:48:07 -0600

> For proper IRQ generation by DP83867 phy the INT/PWDN pin has to be
> programmed as an interrupt output instead of a Powerdown input in
> Configuration Register 3 (CFG3), Address 0x001E, bit 7 INT_OE = 1. The
> current driver doesn't do this and as result IRQs will not be generated by
> DP83867 phy even if they are properly configured in DT.
> 
> Hence, fix IRQ generation by properly configuring CFG3.INT_OE bit and
> ensure that Link Status Change (LINK_STATUS_CHNG_INT) and Auto-Negotiation
> Complete (AUTONEG_COMP_INT) interrupt are enabled. After this the DP83867
> driver will work properly in interrupt enabled mode.
> 
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>

Applied.