From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/2] Support for Axentia TSE-850
Date: Tue, 10 Jan 2017 16:17:29 +0100 [thread overview]
Message-ID: <20170110151729.acper3qneohlfe4z@piout.net> (raw)
In-Reply-To: <1484054314-6244-1-git-send-email-peda@axentia.se>
On 10/01/2017 at 14:18:32 +0100, Peter Rosin wrote :
> Hi!
>
> changes v5 -> v6
> - drop the &main clock-frequency
> - add some text to the commit messages
> - make config additions modules
>
> changes v4 -> v5
> - comment from Rob about the memory node made me look closer and
> the memory size is actually updated by the bootloader, and that
> hid the fact that the entry was always faulty. This version
> specifies the correct memory size from the start, which is 64MB.
> - ack from Rob
>
> changes v3 -> v4
> - rename files arch/arm/boot/dts/axentia-* to .../at91-*
> - remove bootargs from at91-tse850-3.dts
> - depend on the atmel ssc to register as a sound dai by itself
> - bump copyright years
>
> changes v2 -> v3
> - document the new compatible strings prefixed with "axentia,".
>
> changes v1 -> v2
> - squash the fixup into the correct patch, sorry for the noise.
>
> After finally having all essintial drivers upstreamed I would
> like to have the dts and the defconfig also upstreamed.
>
> The atmel-ssc/sound-dai change depends on a change that has been
> sitting in the ASoC tree since mid-december, and I have been waiting
> for it to hit linux-next before sending this, but it seems to take
> longer than I anticipated. So, since I do not want this to in
> turn miss the next merge window because of that wait I therefore
> request that this is taken now even though it doesn't really work
> w/o the ASoC "topic/atmel" branch as of 2016-12-15 [1]. It of course
> builds cleanly even w/o those ASoC changes. That effectively means
> that noone besides me should notice the inconsistency (I currently
> have all affected devices under my control).
>
> Cheers,
> peda
>
> [1] http://git.kernel.org/cgit/linux/kernel/git/broonie/sound.git/log/?h=topic/atmel
>
> Peter Rosin (2):
> ARM: dts: at91: add devicetree for the Axentia TSE-850
> ARM: sama5_defconfig: add support for the Axentia TSE-850 board
>
> Documentation/devicetree/bindings/arm/axentia.txt | 19 ++
> MAINTAINERS | 8 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/at91-linea.dtsi | 49 ++++
> arch/arm/boot/dts/at91-tse850-3.dts | 274 ++++++++++++++++++++++
> arch/arm/configs/sama5_defconfig | 7 +-
> 6 files changed, 357 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/arm/axentia.txt
> create mode 100644 arch/arm/boot/dts/at91-linea.dtsi
> create mode 100644 arch/arm/boot/dts/at91-tse850-3.dts
>
Both applied, thanks!
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
prev parent reply other threads:[~2017-01-10 15:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-10 13:18 [PATCH v6 0/2] Support for Axentia TSE-850 Peter Rosin
2017-01-10 13:18 ` [PATCH v6 1/2] ARM: dts: at91: add devicetree for the " Peter Rosin
2017-01-10 13:18 ` [PATCH v6 2/2] ARM: sama5_defconfig: add support for the Axentia TSE-850 board Peter Rosin
2017-01-10 13:24 ` [PATCH v6 0/2] Support for Axentia TSE-850 Nicolas Ferre
2017-01-10 15:17 ` Alexandre Belloni [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170110151729.acper3qneohlfe4z@piout.net \
--to=alexandre.belloni@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).