[PATCH 1/2] ARM: dts: imx6: Specify 'anatop-enable-bit' where appropriate

[PATCH 1/2] ARM: dts: imx6: Specify 'anatop-enable-bit' where appropriate

[Andrey Smirnov]

ENABLE_LINREG bit is implemented by 3P0, 1P1 and 2P5 regulators on
i.MX6. This property is present in similar code in Fresscale BSP and
made its way upstream in imx6ul.dtsi, so this patch adds this property
to the rest of i.MX6 family for completness.

Cc: yurovsky at gmail.com
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: devicetree at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 3 +++
 arch/arm/boot/dts/imx6sl.dtsi  | 3 +++
 arch/arm/boot/dts/imx6sx.dtsi  | 3 +++
 3 files changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 89b834f..9702e18 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -635,6 +635,7 @@
 					anatop-min-bit-val = <4>;
 					anatop-min-voltage = <800000>;
 					anatop-max-voltage = <1375000>;
+					anatop-enable-bit = <0>;
 				};
 
 				regulator-3p0 {
@@ -649,6 +650,7 @@
 					anatop-min-bit-val = <0>;
 					anatop-min-voltage = <2625000>;
 					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
 				};
 
 				regulator-2p5 {
@@ -663,6 +665,7 @@
 					anatop-min-bit-val = <0>;
 					anatop-min-voltage = <2000000>;
 					anatop-max-voltage = <2750000>;
+					anatop-enable-bit = <0>;
 				};
 
 				reg_arm: regulator-vddcore {
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 19cbd87..a478a06f 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -522,6 +522,7 @@
 					anatop-min-bit-val = <4>;
 					anatop-min-voltage = <800000>;
 					anatop-max-voltage = <1375000>;
+					anatop-enable-bit = <0>;
 				};
 
 				regulator-3p0 {
@@ -536,6 +537,7 @@
 					anatop-min-bit-val = <0>;
 					anatop-min-voltage = <2625000>;
 					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
 				};
 
 				regulator-2p5 {
@@ -550,6 +552,7 @@
 					anatop-min-bit-val = <0>;
 					anatop-min-voltage = <2100000>;
 					anatop-max-voltage = <2850000>;
+					anatop-enable-bit = <0>;
 				};
 
 				reg_arm: regulator-vddcore {
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 10f3330..3de3cca 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -578,6 +578,7 @@
 					anatop-min-bit-val = <4>;
 					anatop-min-voltage = <800000>;
 					anatop-max-voltage = <1375000>;
+					anatop-enable-bit = <0>;
 				};
 
 				regulator-3p0 {
@@ -592,6 +593,7 @@
 					anatop-min-bit-val = <0>;
 					anatop-min-voltage = <2625000>;
 					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
 				};
 
 				regulator-2p5 {
@@ -606,6 +608,7 @@
 					anatop-min-bit-val = <0>;
 					anatop-min-voltage = <2100000>;
 					anatop-max-voltage = <2875000>;
+					anatop-enable-bit = <0>;
 				};
 
 				reg_arm: regulator-vddcore {
-- 
2.9.3

[PATCH 2/2] ARM: dts: imx7s: Adjust anatop-enable-bit for 'reg_1p0d'

[Andrey Smirnov]

In PMU_REG_1P0Dn ENABLE_LINREG is bit 0. Bit 31 is called OVERRIDE and
it serves the funtion of granting permission to GPC IP block to alter
various other bit-fields of the register. The reason why this property,
that trickeld here from Freescale BSP, is set up like that is because in
the code it came from it is used in conjunction with a notifier handler
for REGULATOR_EVENT_PRE_DO_ENABLE and REGULATOR_EVENT_PRE_DO_DISABLE
events (not found in upstream kernel) that triggers GPC to start
manipulating aforementioned other bitfields.

Since:
	a) none of the aforementioned machinery is implemented by
	   upstream
	b) using 'anatop-enable-bit' in that capacity is a bit of a
	   semantic stretch

simplify the situation by setting the value of 'anatop-enable-bit' to
point to ENABLE_LINREG (same as i.MX6).

Cc: yurovsky at gmail.com
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: devicetree at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 arch/arm/boot/dts/imx7s.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 8ff2cbdd..c80d0db 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -509,7 +509,7 @@
 					anatop-min-bit-val = <8>;
 					anatop-min-voltage = <800000>;
 					anatop-max-voltage = <1200000>;
-					anatop-enable-bit = <31>;
+					anatop-enable-bit = <0>;
 				};
 			};
 
-- 
2.9.3

[PATCH 1/2] ARM: dts: imx6: Specify 'anatop-enable-bit' where appropriate

[Fabio Estevam]

On Tue, Jan 10, 2017 at 2:30 PM, Andrey Smirnov
<andrew.smirnov@gmail.com> wrote:
> ENABLE_LINREG bit is implemented by 3P0, 1P1 and 2P5 regulators on
> i.MX6. This property is present in similar code in Fresscale BSP and
> made its way upstream in imx6ul.dtsi, so this patch adds this property
> to the rest of i.MX6 family for completness.

Please see:
https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/patch/arch/arm/boot/dts/imx6ul.dtsi?id=27958ccdf29e9971732e02494b48be54b0691269

[PATCH 1/2] ARM: dts: imx6: Specify 'anatop-enable-bit' where appropriate

[Andrey Smirnov]

On Tue, Jan 10, 2017 at 9:28 AM, Fabio Estevam <festevam@gmail.com> wrote:
> On Tue, Jan 10, 2017 at 2:30 PM, Andrey Smirnov
> <andrew.smirnov@gmail.com> wrote:
>> ENABLE_LINREG bit is implemented by 3P0, 1P1 and 2P5 regulators on
>> i.MX6. This property is present in similar code in Fresscale BSP and
>> made its way upstream in imx6ul.dtsi, so this patch adds this property
>> to the rest of i.MX6 family for completness.
>
> Please see:
> https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/patch/arch/arm/boot/dts/imx6ul.dtsi?id=27958ccdf29e9971732e02494b48be54b0691269

Fabio:

I submitted a patch implementing this property to LKML as well, see
https://www.spinics.net/lists/kernel/msg2418471.html

All of these patches are a part of a broader attempt to add PCIe
support for i.MX7, and on that platform this is a part of a 1P0D
regulator which supplies PCIe PHY.

I can rebase this patch set to take your commit into account, or else
let's discuss the best way to allow setting ENABLE_LINREG.

Thanks,
Andrey Smirnov